scottdm62[TK] Posted February 5, 2017 Report Posted February 5, 2017 (edited) Name: scott mossID: TK62000FISD Name: scottdm62Garrison: Bloodfin GarrisonArmor= AM2 / NEHelmet= AnvosoBlaster= hfxproductions DLT-19optionalHeight = 6'Gender: MaleBoots =Imperial bootsHand Plates =TrooperbayNeck Seal = AnvosoBelt = TkittleAll photos submitted and links changed to photos Edited February 21, 2017 by scottdm62 1 Quote
justjoseph63[Staff] Posted February 5, 2017 Report Posted February 5, 2017 Looking good, Scott, and SO glad to see that you ditched the Anovos Velcro and went with a much better strapping system as well as getting a new canvas belt. It looks as if you will be (hopefully) aiming for Centurion, so here are a few suggestions.. I would raise your ABS belt until it touches the ab button plate, (or even overlaps it a bit), change out the screen in the hovi-mic tips to a wider mesh and paint the inside white, and include photos of the back of your TD. GREAT job painting those ab plate buttons!!! 1 Quote
gazmosis[501st] Posted February 5, 2017 Report Posted February 5, 2017 Great looking overall build. The gray paint for your ab buttons looks really dark. Also, like Joseph mentioned, you need a pic of the attachment side of your thermal detonator. I noticed a black center to the round detail?? If that is present, that must be removed. Keep in mind that forward progress on this application will be held up until your blaster and action shots are provided. Quote
scottdm62[TK] Posted February 5, 2017 Author Report Posted February 5, 2017 Looking good, Scott, and SO glad to see that you ditched the Anovos Velcro and went with a much better strapping system as well as getting a new canvas belt. It looks as if you will be (hopefully) aiming for Centurion, so here are a few suggestions.. I would raise your ABS belt until it touches the ab button plate, (or even overlaps it a bit), change out the screen in the hovi-mic tips to a wider mesh and paint the inside white, and include photos of the back of your TD. GREAT job painting those ab plate buttons!!! Confused a bit, maybe it's too early for me, but are these suggestions for EIB improvement, or future reference for Centurion? With that said I will look at fixing those. However. The belt is actually set a little lower to cover up the shim I added to make the ab piece taller. It's actually covering the seem of the shim. It's hiding some ugliness. As far as the back of the TD, here you go. https://drive.google.com/file/d/0B6g8znXQ-O7gYU1vV3NjWTk2ZnM/view?usp=sharing Quote
scottdm62[TK] Posted February 5, 2017 Author Report Posted February 5, 2017 (edited) Great looking overall build. The gray paint for your ab buttons looks really dark. Also, like Joseph mentioned, you need a pic of the attachment side of your thermal detonator. I noticed a black center to the round detail?? If that is present, that must be removed. Keep in mind that forward progress on this application will be held up until your blaster and action shots are provided. Yes there is a light in the TD from the previous owner, that is that black spot you see. If that needs to be gone I will make it so. And the buttons may just be dark due to light. Let me see if this shows up better. Belt adjusted as well as hopefully better color detail. https://drive.google.com/file/d/0B6g8znXQ-O7gZzJGTGhZRzZEOUE/view?usp=sharing And painted over light to make solid white on TD https://drive.google.com/file/d/0B6g8znXQ-O7gb3BUbC1jNTZheHM/view?usp=sharing Edited February 5, 2017 by scottdm62 Quote
magni[TK] Posted February 5, 2017 Report Posted February 5, 2017 Great looking build Scott! The Hovi tips "tip" is correct for EIB. Plus the right mesh and painted white will finish that nice bucket you have there. You did great lifting the belt and still hide the shim. Well done! Quote
scottdm62[TK] Posted February 6, 2017 Author Report Posted February 6, 2017 Other than the blaster shots and action shots, for EIB, what further adjustments should I make while I await my blaster? <br><br> I have made a few yesterday thanks to the feedback y'all provided. Quote
Sly11[Admin] Posted February 13, 2017 Report Posted February 13, 2017 Is it just me, or can everyone else see the images in your application. All i see are links of which i need to go into individually. Any chance you can post the actual images instead. If google drive isnt working for you perhaps try IMGUR, no adds and easy to use once you have a play. Quote
scottdm62[TK] Posted February 14, 2017 Author Report Posted February 14, 2017 (edited) My blaster came in today. Posted left and right hand side photos. Now going tto put on armor for action shot (plus a walk around the block to get used to it). And if it is easier change all the photos to photobucket vs links. Edited February 14, 2017 by scottdm62 1 Quote
scottdm62[TK] Posted February 14, 2017 Author Report Posted February 14, 2017 Ok guys, photos instead of links and blaster and action shots. Now it is an official EIB application. Quote
Dark PWF[Staff] Posted February 15, 2017 Report Posted February 15, 2017 I am totally in awe of the paint work you did here. Absolutely phenomenal!! Good looking build Scott! Looking forward to seeing you sporting those advanced tactics badges around the forums, and of course, many thanks for doing the little bit of extra work required and applying! 2 Quote
ukswrath[Staff] Posted February 15, 2017 Report Posted February 15, 2017 Alright Scott Andrew or myself will be with your shortly. While you're hanging around can we get a better photo of your ab buttons, as Gaz mentioned they don't look correct. Thank brother. Quote
scottdm62[TK] Posted February 15, 2017 Author Report Posted February 15, 2017 A little better lighting. Quote
ukswrath[Staff] Posted February 16, 2017 Report Posted February 16, 2017 Thanks Scott but is that grey, it looks like brown Quote
scottdm62[TK] Posted February 16, 2017 Author Report Posted February 16, 2017 Thanks Scott but is that grey, it looks like brown Yes sir it is gray. I don't know why I can't get better photos. Had the same issue getting clear photos for first level submission. I'll see if I can find a better photo or use a dif camera. Quote
scottdm62[TK] Posted February 16, 2017 Author Report Posted February 16, 2017 better photos i hope Quote
ukswrath[Staff] Posted February 16, 2017 Report Posted February 16, 2017 That's alright, no worries. Thank you Quote
ukswrath[Staff] Posted February 16, 2017 Report Posted February 16, 2017 Hey Scott, we need a few more photos, helmet "S" seal, waist belt connection (back of the belt) and TD connections (how the clips fasten to the tube). Thanks again Quote
scottdm62[TK] Posted February 16, 2017 Author Report Posted February 16, 2017 The part of the belt touching the ab plate? 1 Quote
ukswrath[Staff] Posted February 16, 2017 Report Posted February 16, 2017 The part of the belt touching the ab plate? Correct Quote
scottdm62[TK] Posted February 17, 2017 Author Report Posted February 17, 2017 Ok, here are the requested photos. I had to rebuild my TD from scratch as I could not get some holes to fill and look good. Quote
scottdm62[TK] Posted February 21, 2017 Author Report Posted February 21, 2017 Just a follow up, is there some other photos needed? I think I have them all. Just let me know. Please and thank you. Quote
scottdm62[TK] Posted February 21, 2017 Author Report Posted February 21, 2017 (edited) Damn!!!!!! Tried to make an edit on my phone and it messed everything up!!!! I'm never going to get EIB!!!! Let me know if I need to resubmit everything AGAIN Edited February 21, 2017 by scottdm62 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.