Pixelito Posted January 16, 2017 Report Posted January 16, 2017 Name: Brian Martino Legion ID: TK-16924 http://www.501st.com/members/displaymember.php?userID=21419&costumeID=122 Garrison: Cloud City Garrison EIB Application: http://www.whitearmor.net/forum/topic/37190-tk-16924-requesting-hwt-eib-status-anovos581/ Height: 6' 4" Weight: 250lbs. Armor: Anovos (Modified) Helmet: Anovos Blaster: Hyperfirm DLT-19 Boots: TKBoots Canvas belt: Trooperbay Hand Plates: Trooperbay Electronics: Self-made fan system, iComm and Ukswrath's Hovi mics, amplifier and SHA Neck Seal: Anovos supplied Pauldron: Trooperbay I apologize for waiting nearly a year to put in this application. Thank you for your time and consideration. (Please pardon the interior of my armor. Adding the shims made a total mess of things!) Full Body: Armor Details: Helmet: (Note: I used an older picture because my s-trim is now glued on to keep it in place a little better. It hasn't changed though.) Accessories: (Note: The blaster pictures are the same that I used on my EIB application, so they're a litter older. Nothing has changed though.) (Just showing the electronics. There's lots of hot glue in there and it's cramped! Everything is in the bucket though.) Shims: (I'm just adding this section to show how I got Anovos armor to fit me. I know it isn't totally necessary.) Split the ab plate and added the shim Details were added back on using Apoxie Sculpt Same with the kidney plate 1 Quote
justjoseph63[Staff] Posted January 16, 2017 Report Posted January 16, 2017 AWESOME job, Brian!!! Always great to see another level 3 HWT submission! Incredible job on those shims, brother. They may need to see an outside view of the side shims, but if they look even half as good as the ones on your ab and kidney you should be set to go. Also, you will probably need to change out the white elastic strap on the back of the shoulder bridges... it should be about 1/4 inch wide, and is available at most craft/fabric shops (even Wal-mart) An EASY fix! I look forward to welcoming you to the ranks of the few, the proud, the HWT Centurions! 1 Quote
magni[TK] Posted January 16, 2017 Report Posted January 16, 2017 Looking great Brian! Yet another HWT for the Centurion Ranks! Well done! Quote
Pixelito Posted January 16, 2017 Author Report Posted January 16, 2017 Thanks guys! I knew that I was going to forget a picture or two. Here's the side shim picture that I meant to add (I can take more tonight if needed): I somehow managed to take this picture at a weird angle, so you can't see the cutout. It's present in a picture in the original post. Just so it doesn't seem like I'm hiding it- It's probably a good time to bring up that I'm a bit uncertain about how the cutout works on my fatty shims. I think that I might have to extend the cut all the way back but I didn't want to do it without being told first, just to be safe! As for the elastic, I'll get that all fixed up after work! I have some non-roll elastic left from making my shins. If anybody sees this before tonight, is that type too textured for this purpose or does it matter? Quote
justjoseph63[Staff] Posted January 16, 2017 Report Posted January 16, 2017 WOW! One of the best shim jobs I've seen, Brian! As for the elastic, it should be relatively plain and 1/4 inch wide. A roll costs like $1.29. and will last a long time. (Unless you are like me and lose at least one of the danged things at every troop, LOL) Quote
magni[TK] Posted January 16, 2017 Report Posted January 16, 2017 That's one good looking invisible shim! Quote
Pixelito Posted January 17, 2017 Author Report Posted January 17, 2017 There we go! A trip to the store, a few dollars and 2 minutes of work later: Thanks again for the positive comments, guys! Quote
justjoseph63[Staff] Posted January 17, 2017 Report Posted January 17, 2017 Perfect! I can see that Centurion bar under your name very soon, Brian. Quote
ukswrath[Staff] Posted January 23, 2017 Report Posted January 23, 2017 Hey Brian we'll be with you shortly. Quote
Pixelito Posted January 24, 2017 Author Report Posted January 24, 2017 Update: My belt was a little too low, so I raised it up to a more accurate level (I hope. ;P ). Quote
ukswrath[Staff] Posted January 24, 2017 Report Posted January 24, 2017 Looks great thanks Brian Quote
CrookKnight[TK] Posted January 24, 2017 Report Posted January 24, 2017 Looking Great. Love the shims. You will have to share your secret on how you made them look so good. Good Luck and hope to see you as the next HWT Centurion. Quote
magni[TK] Posted January 24, 2017 Report Posted January 24, 2017 Hang in there Brian! The only thing I notice is you should put some foam in the ammo pouches to make them look full. Good Luck #7! Quote
Pixelito Posted January 24, 2017 Author Report Posted January 24, 2017 Looking Great. Love the shims. You will have to share your secret on how you made them look so good. Good Luck and hope to see you as the next HWT Centurion. Thank you! Secret is lots of Apoxie Sculpt and hours of sanding!...So much sanding... I still see sandpaper in my dreams some nights. Hang in there Brian! The only thing I notice is you should put some foam in the ammo pouches to make them look full. Good Luck #7!Ah yes! I've been considering this for a while but I keep putting it off for some reason. I think that I was hoping for something cool to come along to stick in there... But nobody would see it anyway, I suppose! I guess I'll stick with foam. 1 Quote
magni[TK] Posted January 24, 2017 Report Posted January 24, 2017 When we do parades I put individually wrapped Twizlers in mine to hand out to kids. They love it! Sent from my LGMS631 using Tapatalk 2 Quote
ukswrath[Staff] Posted January 25, 2017 Report Posted January 25, 2017 Hey Brian, thank you for your Centurion application, let's get started. CRL and Centurion Application Requirements: All submission photos are present. Your armor displays all the Centurion required components. Sly and I would like to congratulate and welcome you to level 3. Excellent work!! . Another HWT hits the Centurion stage, welcome to the elite brother. Another note worth mentioning, during Brian's application I privately asked him if he would raise the waist belt after noticing it was too low but forgot to mention it during his EIB application. Technically he didn't have to do it but he wanted to do whatever it took to look his best and earn the Centurion badge. I would like to commend him on his decision to go the extra mile. The Empire is proud to have you in it's ranks Brian, great job Quote
Pixelito Posted January 25, 2017 Author Report Posted January 25, 2017 Thank you Tony! I'm honored! 2 Quote
justjoseph63[Staff] Posted January 25, 2017 Report Posted January 25, 2017 Way to go, Brian!!! HWT Centurion # 7 Welcome to the ranks, brother! Quote
CrookKnight[TK] Posted January 25, 2017 Report Posted January 25, 2017 Congrats and welcome to the club. Sent from my SM-G930P using Tapatalk Quote
Raintrooper Posted January 26, 2017 Report Posted January 26, 2017 Congrats, Brian! Awesome work! Cloud City is lookin' good! Quote
MacPhisto[TK] Posted January 26, 2017 Report Posted January 26, 2017 Most excellent uniform! Congratulations! The armor looks fantastic!!!! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.