Auel Posted December 3, 2016 Report Share Posted December 3, 2016 (edited) Not sure if this has been brought up. But I have been watching Secrets of the Force and TFA back to back and after lots of observation. I believe some parts of the suits used in the film are made of rubber and plastic. There's lots of squeaking when the armour was put on during this scene from Secrets of the Force. And look at the contour on the chest and torso.. And the amount of flex during this scene on Finn's armor. Would this be a requirement for a future centurion status for the FOTK? Edited December 3, 2016 by Auel Quote Link to comment Share on other sites More sharing options...
Auel Posted December 3, 2016 Author Report Share Posted December 3, 2016 And the matter of fact that they are able to sit makes the suspicion even higher. Quote Link to comment Share on other sites More sharing options...
CadBane3[TK] Posted December 3, 2016 Report Share Posted December 3, 2016 That's a valid theory since my ANH TK would split if I tried to recreate any action shots, such as walking down stairs too quickly! Lol Quote Link to comment Share on other sites More sharing options...
A Master Builder Posted December 3, 2016 Report Share Posted December 3, 2016 The screen used armor was made to flex. Especially the yoke part. 1 Quote Link to comment Share on other sites More sharing options...
tkrestonva[TK] Posted December 3, 2016 Report Share Posted December 3, 2016 Yes, I believe the screen-used armor was made of a flexible (and proprietary) material. Quote Link to comment Share on other sites More sharing options...
flametrooper Posted December 20, 2016 Report Share Posted December 20, 2016 Interesting.......do you know the manufacturer? Quote Link to comment Share on other sites More sharing options...
Garrett Steele Posted April 11, 2017 Report Share Posted April 11, 2017 I noticed that when the troopers were running down the gang plank in the introduction some of their cod pieces seem to flex and fold in on itself. Quote Link to comment Share on other sites More sharing options...
Garrett Steele Posted April 11, 2017 Report Share Posted April 11, 2017 I noticed that when the troopers were running down the gang plank in the introduction some of their cod pieces seem to flex and fold in on itself. Quote Link to comment Share on other sites More sharing options...
RedSpecial[TK] Posted April 11, 2017 Report Share Posted April 11, 2017 Correct me if I'm wrong but I'm sure I read somewhere that the screen used armour was cast as opposed to being formed?If that is the case and I'm not just miss-remembering, its most likely either a flexible polyurethane resin such as Smooth-on semi rigid or simpact resins.A similar result can also be acheived by mixing a polyurethane resin with a polyurethane rubber in various ratios dependant on the amount of flex, impact resistance and dimensional stability needed. Quote Link to comment Share on other sites More sharing options...
ANHWannaBe Posted April 13, 2017 Report Share Posted April 13, 2017 I saw some where the screen used armor was a urethane. Like a bat suit. Pretty sure it was an anovos video from a convention but don't hold me to it. 1 Quote Link to comment Share on other sites More sharing options...
themaninthesuitcase[Admin] Posted April 13, 2017 Report Share Posted April 13, 2017 I know a couple of people who were in TFA as troopers, next time I speak to one I'll see if they can answer this or if there's some NDA still. 1 Quote Link to comment Share on other sites More sharing options...
Daetrin[Admin] Posted April 13, 2017 Report Share Posted April 13, 2017 I know a couple of people who were in TFA as troopers, next time I speak to one I'll see if they can answer this or if there's some NDA still. Please do. Quote Link to comment Share on other sites More sharing options...
themaninthesuitcase[Admin] Posted April 13, 2017 Report Share Posted April 13, 2017 I messaged one of them: They were injection moulded and came in a couple of stiffnesses. Some where rubbery (his words) some stiffer. It was all a bit mix and match when they did their shoot. Quote Link to comment Share on other sites More sharing options...
TK4205 Posted April 13, 2017 Report Share Posted April 13, 2017 I had access to two suits that were so called screen used. They were 3D printed. It stands to reason that they would use whatever they needed for action shots, so they no doubt had some sort of pliable armor. Quote Link to comment Share on other sites More sharing options...
Parquette[TK] Posted April 13, 2017 Report Share Posted April 13, 2017 Off topic, but I don't have bluray or would I like to buy another version of TFA. Where could I watch these behind the scenes for it? Quote Link to comment Share on other sites More sharing options...
Seth Hendrix Posted April 15, 2017 Report Share Posted April 15, 2017 I can't remember off-hand what the stuff is called. But for the Iron Man films, a lot of the practical armor pieces they used were made of stiff urethane rubber. They combined that with fiberglass, plastic, and metal pieces to make the entire suit. So it's definitely possible that a couple pieces of the Stormtroopers' suits might have been the same kind of rigid urethane rubber for flexibility of the actors. If I can track down which material it was, I'll post it up. Quote Link to comment Share on other sites More sharing options...
troopermaster Posted April 15, 2017 Report Share Posted April 15, 2017 When I spoke to Ross (who played a Stormtrooper in TFA) about the armour, he said it was a flexible rubber type material. He said that you could almost peel the armour off - his words. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.