mr paul Posted October 22, 2016 Report Posted October 22, 2016 (edited) SKIP TO PAGE 6 FOR THE SHORETROOPER HELMET PAINT TUTORIAL. Edited November 7, 2017 by mr paul 9 Quote
ukswrath[Staff] Posted October 22, 2016 Report Posted October 22, 2016 Very nice weathering job 1 Quote
mgb1016[501st] Posted October 22, 2016 Report Posted October 22, 2016 That really is a beautiful lid. That's also the first real close-up shots I've seen of one. Great job! 1 Quote
Scubadans Posted October 22, 2016 Report Posted October 22, 2016 Thanks for sharing Paul! Sent from my iPhone using Tapatalk 1 Quote
mr paul Posted October 22, 2016 Author Report Posted October 22, 2016 Hi and thank you all for your kind comments. I will have some more to post up tomorrow. Thank for the interest Quote
mr paul Posted October 23, 2016 Author Report Posted October 23, 2016 (edited) . Edited November 1, 2017 by mr paul 2 Quote
themaninthesuitcase[Admin] Posted October 23, 2016 Report Posted October 23, 2016 I really like these BSP helmets. As much as I am 3D printing one I keep looking at these and think I want one. 1 Quote
mr paul Posted October 23, 2016 Author Report Posted October 23, 2016 (edited) . Edited November 1, 2017 by mr paul 1 Quote
mr paul Posted October 23, 2016 Author Report Posted October 23, 2016 (edited) . Edited November 1, 2017 by mr paul Quote
mr paul Posted October 23, 2016 Author Report Posted October 23, 2016 (edited) . Edited November 1, 2017 by mr paul Photo Bucket killed my thread. 2 Quote
mr paul Posted October 23, 2016 Author Report Posted October 23, 2016 (edited) . Edited November 1, 2017 by mr paul Quote
mr paul Posted October 23, 2016 Author Report Posted October 23, 2016 (edited) . Edited November 1, 2017 by mr paul 4 Quote
Griffin-X[TK] Posted October 23, 2016 Report Posted October 23, 2016 Looking good so far! Btw, the CRL for this is being developed over on the Spec Ops detachment site. We have a lot of members working on the costume and the corresponding variants. There's a lot of great stuff happening with it! www.501stspecopsdet.net 2 Quote
mr paul Posted October 23, 2016 Author Report Posted October 23, 2016 Looking good so far! Btw, the CRL for this is being developed over on the Spec Ops detachment site. We have a lot of members working on the costume and the corresponding variants. There's a lot of great stuff happening with it! www.501stspecopsdet.net Thank you. I shall check it out 2 Quote
ScaryGuy[TK] Posted October 23, 2016 Report Posted October 23, 2016 Excellent tutorial, very usefull! I also ordered a BSP helmet, although I hope doing an AT-ACT driver instead with the helmet being white. 2 Quote
mr paul Posted October 23, 2016 Author Report Posted October 23, 2016 Excellent tutorial, very usefull! I also ordered a BSP helmet, although I hope doing an AT-ACT driver instead with the helmet being white.Thank you...its great to have the option of another colour way. Quote
I'm Batman[501st] Posted October 23, 2016 Report Posted October 23, 2016 Excellent tutorial, very usefull! I also ordered a BSP helmet, although I hope doing an AT-ACT driver instead with the helmet being white. I assume you ordered the AT-ACT (or Tank Trooper) helmet and NOT the Shoretrooper helmet. They are totally different Quote
The5thHorseman[501st] Posted October 23, 2016 Report Posted October 23, 2016 The weathering you did on the blast shield is to me your best of the entire helmet. Those very subtle grey scratches are so realistic and so well "randomized"... They totally sell the thing. Truly beautiful! 2 Quote
mr paul Posted October 23, 2016 Author Report Posted October 23, 2016 (edited) I assume you ordered the AT-ACT (or Tank Trooper) helmet and NOT the Shoretrooper helmet. They are totally different I think (I may be wrong) the AT-ACT driver is not the same as the tank trooper. The AT-ACT driver is a black and white version of the Shoretrooper. I am sure I saw a toy of it somewhere. Edited October 23, 2016 by mr paul Quote
mr paul Posted October 23, 2016 Author Report Posted October 23, 2016 (edited) I will try and get some more posted tomorrow. Edited October 23, 2016 by mr paul 1 Quote
mr paul Posted October 23, 2016 Author Report Posted October 23, 2016 The weathering you did on the blast shield is to me your best of the entire helmet. Those very subtle grey scratches are so realistic and so well "randomized"... They totally sell the thing. Truly beautiful! Thank you. The forehead is a very pleasing aesthetic in the design of this helmet. The coloured logo in the corner really sets it off. Painting it was fun and it is hard not to over do the scratches etc. I am pleased you appreciate it,, cheers. Quote
I'm Batman[501st] Posted October 23, 2016 Report Posted October 23, 2016 I think (I may be wrong) the AT-ACT driver is not the same as the tank trooper. The AT-ACT driver is a black and white version of the Shoretrooper. I am sure I saw a toy of it somewhere. Ah, you may be right there. I thought I read early reports that the images were just a mock up, but there are pictures and videos out and about now of the white 'shoretrooper' 1 Quote
ScaryGuy[TK] Posted October 24, 2016 Report Posted October 24, 2016 (edited) Ah, you may be right there. I thought I read early reports that the images were just a mock up, but there are pictures and videos out and about now of the white 'shoretrooper' https://www.youtube.com/watch?v=DYIh3w81b68 Yes, I was referring to that toy. I hope it's going to be in rogue one, I really like the color scheme and I prefer the shoretrooper helmet over the hovertank trooper helmet. I guess I'm biased to white armor . Edited October 24, 2016 by ScaryGuy Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.