40mm Pipe build

[Bozzy]

Firstly don't shoot me.. i couldn't get the 38.1

 

BUT... i am after some parts if they are available and if they fit .. if you fine people can point me in the right direction.

 

Looking for a inner barrel, spring cup and bolt assembly in resin to fit the 40mm pipe

 

Any help ?

[Troopacoola[TK]]

Firstly don't shoot me.. i couldn't get the 38.1

 

BUT... i am after some parts if they are available and if they fit .. if you fine people can point me in the right direction.

 

Looking for a inner barrel, spring cup and bolt assembly in resin to fit the 40mm pipe

 

Any help ?

Hello there! I've just completed my doopy build, and for the spring cup I cut down a permanent marker.As for the bolt, i was toying with cleaning out the resin on the doopy kit and making my own. I decided against it though, as the internal resin was too thick. I created the spring end of the bolt from abs, but seeing as you're doing a pipe build I reckon you could fashion one from thin aluminium and some styrene. I'm pretty sure someone will direct you where to get a resin one from though mate

 

Where in Lancs are you?

 

Marc

 

My Wips...

http://www.ukgarrison.co.uk/forum/viewtopic.php?t=61082

http://www.whitearmor.net/forum/index.php?/topic/38021-CTID's-RWA-ANH-Stunt-WIP......-501st-Here-we-go!

http://www.ukgarrison.co.uk/forum/viewtopic.php?t=60937

http://www.whitearmor.net/forum/index.php?/topic/38731-CTID's-Doopy's-E-11-Build

[Bozzy]

Hello there! I've just completed my doopy build, and for the spring cup I cut down a permanent marker.As for the bolt, i was toying with cleaning out the resin on the doopy kit and making my own. I decided against it though, as the internal resin was too thick. I created the spring end of the bolt from abs, but seeing as you're doing a pipe build I reckon you could fashion one from thin aluminium and some styrene. I'm pretty sure someone will direct you where to get a resin one from though mate

 

Where in Lancs are you?

 

Marc

 

My Wips...

http://www.ukgarrison.co.uk/forum/viewtopic.php?t=61082

http://www.whitearmor.net/forum/index.php?/topic/38021-CTID's-RWA-ANH-Stunt-WIP......-501st-Here-we-go!

http://www.ukgarrison.co.uk/forum/viewtopic.php?t=60937

http://www.whitearmor.net/forum/index.php?/topic/38731-CTID's-Doopy's-E-11-Build

Hi ,

 

Just outside Chorley .. Buckshaw village.

 

I can craft stuff if needed but if it's readily available I'd rather go down that route to save time.

 

 

Sent from my iPhone using Tapatalk

[Troopacoola[TK]]

I'm in Manchester, I used to play football for Horwich RMI before moved to Leigh, many years ago!

Have you tried Mark on the UKG?

 

Marc

[Troopacoola[TK]]

Resin bolts and inner barrels...

http://www.whitearmor.net/forum/index.php?/topic/33001-Resin-cast-Sterling-barrel-and-bolt-spring-cup

 

Marc

[nmcguff]

If you have access to a 3D printer you may want to try the parts I have designed for 3D printing. I used an actual Sterling L2A3 and measured the parts and created models in Solidworks. You may need to scale up or down to fit the inner diameter of your pipe. You can find the parts here: http://www.whitearmor.net/forum/topic/31703-e-11-blaster-3d-printed-parts

[I'm Batman[501st]]

My first build (in my signature) was with 40mm pipe. Because it also had a bigger wall thickness it came out about the same inner diameter as a 38.1/1.6 tube. All the standard parts fitted great.

[sla73]

If you have access to a 3D printer you may want to try the parts I have designed for 3D printing. I used an actual Sterling L2A3 and measured the parts and created models in Solidworks. You may need to scale up or down to fit the inner diameter of your pipe. You can find the parts here: http://www.whitearmor.net/forum/topic/31703-e-11-blaster-3d-printed-parts

 

Also try http://www.stormtrooperblaster.com/ - The parts are great, I have a few! He also has a 38.1 PVC pipe for sale..

Edited October 21, 2016 by sla73