NINJAM0VE[TK] Posted September 26, 2016 Report Posted September 26, 2016 General Info · Name = Dennis James Maloom · TK ID = 16112 · FISD Name = NINJAM0VE · Garrison = Singapore Garrison Body Type · Height = 5’10” · Weight = 75 kg Costume · Armor Maker = MTK · Helmet Maker = MTK · Blaster Type = Doopy Doos Full Resin Kit · Boots = TK Boots · Canvas Belt = DIY · Hand Plates Type = Trooperbay ANH Stunt White Rubber · Electronics = None · Neckseal Maker = Darman Props · Holster Maker = Darman Props Photos Full Body Front – Arms at side Back – Arms at side Left – Arms raised Right – Arms raised Right side detail – Arms raised Left side details – Arms raised Action Shot Helmet Off Armor Details Abdomen Details Cod and Butt Plate Attachment Interior Strapping Chest Shoulder Elastic Straps Kidney Plate Notch Ammo Belt and Holster Forearm Details Hand Plates Thigh Pack Attachment Knee Plate Split Rivets Abdomen to Kidney Plate Snap on Abdomen Plate Helmet Details Front Sides Back Hovi Tip Detail Vocoder / Teeth Details Lens Color Backlit S-Trim Blaster Details Blaster – Left Blaster – Right D-Ring Accessory Details Neck Seal Thermal Detonator – Front Thermal Detonator – Back Holster Attachment Thanks Guys! Quote
Novak Dimon[TK] Posted September 26, 2016 Report Posted September 26, 2016 Hi Dennis, <br> your armor is looking great. I think that's an easy job for the DO's. 1 Quote
NINJAM0VE[TK] Posted September 27, 2016 Author Report Posted September 27, 2016 Hi Dennis, <br>your armor is looking great. I think that's an easy job for the DO's. Hi Christian, Thank you so much for the compliment! I noticed a need for modification. Need to update my application. Cheers! Quote
NINJAM0VE[TK] Posted September 27, 2016 Author Report Posted September 27, 2016 Hi Guys, I noticed that the rear sight of my blaster is not installed correctly. I have modified it already and here are the photos showing the revision. Thanks! Blaster Details Blaster – Left Blaster - Right Correct Rear Sight Placement - Thanks Guys! Quote
gazmosis[501st] Posted September 30, 2016 Report Posted September 30, 2016 Nice pick up on that rear sight and terrific armor all together. I'd probably throw aneedle and thread together and seal up the open side of your belt to keep it from coming apart. Nice work overall 2 Quote
NINJAM0VE[TK] Posted October 1, 2016 Author Report Posted October 1, 2016 (edited) Nice pick up on that rear sight and terrific armor all together. I'd probably throw aneedle and thread together and seal up the open side of your belt to keep it from coming apart. Nice work overall Thanks Steve! I'm following your recommendation for my canvas belt. Here are the photos capturing that revision. Again, thanks for the advice and guidance! Edited October 1, 2016 by NINJAM0VE Quote
justjoseph63[Staff] Posted October 1, 2016 Report Posted October 1, 2016 Wow... fantastic job on this armor, Dennis! A nice, clean build, and your connections are spot-on. The only thing that jumped out at me was that your shoulder bridges are not evenly glued to your chest plate. Not that noticeable in the front, but moreso in the back. This may not affect your EIB submission, but you might want to consider this before submitting for Centurion. Hopefully you used E-6000, which would make it an easy fix. (I had the same exact problem on my first build). If you need some advice on how to do it, just PM me. Again, great job on this build, Trooper, and since it looks as if you will definitely get your EIB, check out this thread: http://www.whitearmor.net/forum/topic/38945-free-501st-decal-for-the-next-5-eibs/#entry522361 Quote
NINJAM0VE[TK] Posted October 1, 2016 Author Report Posted October 1, 2016 Wow... fantastic job on this armor, Dennis! A nice, clean build, and your connections are spot-on. The only thing that jumped out at me was that your shoulder bridges are not evenly glued to your chest plate. Not that noticeable in the front, but moreso in the back. This may not affect your EIB submission, but you might want to consider this before submitting for Centurion. Hopefully you used E-6000, which would make it an easy fix. (I had the same exact problem on my first build). If you need some advice on how to do it, just PM me. Again, great job on this build, Trooper, and since it looks as if you will definitely get your EIB, check out this thread: http://www.whitearmor.net/forum/topic/38945-free-501st-decal-for-the-next-5-eibs/#entry522361 Thanks Joseph for the advice. I can definitely adjust the placement of the shoulder straps to make it more symmetrical in front and back view. Hopefully im one of the lucky troopers to get your decal. Again, i appreciate your recommendation for this application. Cheers to you! Dennis Quote
Sly11[Admin] Posted October 7, 2016 Report Posted October 7, 2016 Hey Denis, thank you for your EI application. Lets get started. CRL and EIB Application Requirements: All submission photos have been posted. Your armor displays all the necessary elements to qualify for Expert Infantry. Congratulations trooper! Other-Armor Fit/Assembly: In this section we review observations made by your fellow troopers and ourselves. Some observations may lead to suggestions to improve the overall look of your armor. If any suggestion affects any application, it will be listed separately in the above or below sections. We thank you for such a clean and detailed application, its very obvious you take a lot of pride in your armour and its presentation. Only a couple of very minor things to go over, for one, the unevenness of your shoulder bridge positioning. Joseph pointed this out and it seems you are all over it, so it would be great to see a new photo when its done, but leave that for your Centurion application. Secondly, and this is only from an accuracy stand point, but the screws in your Thermal et can be replaced with a standard Flat blade variety. Its no deal breaker but considering your attention to detail, you might as well change them Great catch with the backwards rear sight, your blaster also looks fantastic. Reference image Centurion Suggestions: Maybe you could trim a little more of the excess material out of the Kidney notch area and square up the corner a bit more. it is fine to keep a slight curve in it probably not as much as it currently has. That's it, we have othing more to add here except get your Centurion application in!! Congratulation yet again Quote
justjoseph63[Staff] Posted October 7, 2016 Report Posted October 7, 2016 WAY TO GO, Dennis, and WELCOME to the ranks, brother! Andrew pointed out a few issues that I am sure you will get taken care of quickly, and then get that Centurion submission in! Also, please PM me your address, and I will get that decal in the mail to you. Quote
NINJAM0VE[TK] Posted October 7, 2016 Author Report Posted October 7, 2016 Thank you so much guys! Me and my wife are very happy that I have passed my application for EIB. This is a great accomplishment for us but I wont stop here. See you on the next round! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.