Bulldog44[TK] Posted January 18, 2017 Report Posted January 18, 2017 Roughly measured my pack, 15 mm for the side pouches, 20mm for the middle.50 across. That is with all the foam stuffed inside. But I think if you can see the pack you might buy, compare the pouches, easiest detail to spot. Quote
Marv Posted January 18, 2017 Report Posted January 18, 2017 (edited) The guy came back to me with the following : under the yoke it is described as a FIeld Pack Combat Nylon LG, which I can only assume is large. It then has a series of numbers, then what looks like MEDINA can anyone confirm if this is a large by the markings? also Pockets measure 23cm high, 15cm wide and 8.5 cm deep but didn't say if they are all same? Edited January 18, 2017 by Marv Quote
Bulldog44[TK] Posted January 18, 2017 Report Posted January 18, 2017 Sorry John, I dyed my pack so I can't see the writing anymore. Its a shame the guy can't send a pic. Have you considered getting one from Colemnas in the US? They are the large ones for sure. The straps are the only thing you will have to source separately. Quote
mr paul Posted January 19, 2017 Report Posted January 19, 2017 The guy came back to me with the following : under the yoke it is described as a FIeld Pack Combat Nylon LG, which I can only assume is large. It then has a series of numbers, then what looks like MEDINA can anyone confirm if this is a large by the markings? also Pockets measure 23cm high, 15cm wide and 8.5 cm deep but didn't say if they are all same? Field Pack, LC-2 large (NSN 8465-01-019-9103) are these the numbers? Quote
ireachy Posted January 20, 2017 Report Posted January 20, 2017 Marv, check the R1 back pack build thread in the R1 part of this site. There is an entire section in there about the correct A.L.I.C.E. pack to use and way of distinguishing between medium and large pack - incl. pics for comparison. Aside from the size difference between the centre pocket and the two outer pockets - as per Bulldog's comment above - the easiest way is to look at the number of webbing details on the side of the pack. The medium pack does not have a bottom single webbing patch Whereas the large pack - the one used on the prop seen at Celebration Europe 2016 - does have the extra bottom single webbing patch Hope this helps. ireachy Quote
Marv Posted February 1, 2017 Report Posted February 1, 2017 Thanks guys got myself a large pack the other was a medium, can anyone point me in the best direction for the straps? Quote
mr paul Posted March 12, 2017 Report Posted March 12, 2017 Thanks guys got myself a large pack the other was a medium, can anyone point me in the best direction for the straps? http://www.ebay.co.uk/itm/WOODLAND-CAMO-LC-2-ALICE-BACKPACK-SHOULDER-STRAPS-NSN-8465-01-073-8326-/292014922624?hash=item43fd721b80:g:BeAAAOSwnHZYkA5L http://www.ebay.com/itm/Quick-Release-LC-2-Alice-Back-Pack-Shoulder-Straps-Camo-w-FS-/272580195337?hash=item3f770bb409:g:7O0AAOSwdGFYnmk- Quote
mr paul Posted March 12, 2017 Report Posted March 12, 2017 Thanks guys got myself a large pack the other was a medium, can anyone point me in the best direction for the straps? https://www.gijoesmilitarysurplus.com/index.php?main_page=product_info&cPath=458&products_id=17684 Quote
BrinkHouse Posted March 13, 2017 Report Posted March 13, 2017 Been trooping in my pack quite a bit lately, loving it and getting lots of thumbs up from other troopers! 2 Quote
darthikari Posted March 20, 2017 Report Posted March 20, 2017 Wore mine to the Adler Planetarium last week, think I found a kiber Crystal in the gift shop..... Sent from my iPhone using Tapatalk 1 Quote
CrookKnight[TK] Posted March 22, 2017 Report Posted March 22, 2017 Mine is dark green heavy nylon Tony, Where did you get most of your components? I have found the frame and grenade holder on Coleman.... I am building one of these for someone now. Big surprise. Quote
ukswrath[Staff] Posted March 22, 2017 Report Posted March 22, 2017 Tony, Where did you get most of your components? I have found the frame and grenade holder on Coleman.... I am building one of these for someone now. Big surprise. I'll have to go back and look, send me a PM Quote
quietguy Posted February 25, 2018 Report Posted February 25, 2018 On 7/28/2016 at 3:12 PM, Troopscoop said: So...for us US folk, how would one obtain this reasonably priced ammo plastic box (as shipping looks to only be for Europe ). Anyone see a US alternative? Or any plans to do a group buy for US people through some third party? Hey all, FYI I got my full box from Coleman's Military Surplus LLC in the US. (www.colemans.com) Total cost $43.78. Quote
TrooperPX[TK] Posted June 6, 2018 Report Posted June 6, 2018 What are members using to fill and shape the main pouch area, and the three pockets? Anyone have pic of what they used? Quote
TrooperPX[TK] Posted June 25, 2018 Report Posted June 25, 2018 N/M... found the post in the other build thread. Ordered the pack dingy hook from mr paul (Transaction ID 3MJ523333H4679643). Got the pack dyed, didn't take great so hit it with some Duplicolor car vinyl spray. Just waiting on the cam-locks and the hook, but have everything else, so I'll be assembling mine tomorrow. Quote
Bulldog44[TK] Posted June 25, 2018 Report Posted June 25, 2018 On 6/6/2018 at 11:32 PM, TrooperPX said: What are members using to fill and shape the main pouch area, and the three pockets? Anyone have pic of what they used? I used seat cushion foam. Lightweight and easy to cut and stuff to form. I had the same problem with the dye not taking well. I need to do a second try at it, this time I will use a fixer that should help the color to lock in better. Quote
Bulldog44[TK] Posted June 25, 2018 Report Posted June 25, 2018 Looking forward to seeing your pack as you assemble it. Good luck. I still need R1 armor, a helmet, blaster & pauldron to complete it all. Quote
TrooperPX[TK] Posted June 27, 2018 Report Posted June 27, 2018 On 6/24/2018 at 10:15 PM, Bulldog44 said: ... I still need R1 armor, a helmet, blaster & pauldron to complete it all. So not much more then... Same here. But the pack was too cool not to make. I'll use it as a table-draw for now. Quote
Bulldog44[TK] Posted July 2, 2018 Report Posted July 2, 2018 On 6/28/2018 at 4:22 AM, TrooperPX said: So not much more then... Same here. But the pack was too cool not to make. I'll use it as a table-draw for now. LOL. Yeah, more armor might put a strain on the marriage so I ma treading carefully about going full R1. Quote
ukswrath[Staff] Posted July 2, 2018 Report Posted July 2, 2018 Hey if anyone is interested I'm selling my R1 TK back pack parts over on the 501st. Just don't have time to build it. https://www.501st.com/forum/viewtopic.php?f=28&t=99794 Quote
Lokialtoriko Posted May 4, 2022 Report Posted May 4, 2022 Am 31.8.2016 um 02:31 schrieb mr paul: Hi and thanks, yes I have found a source for the hooks. The centre pouch is covered by bringing the large alice pack main flap down and over the centre pouch completely covering it. Hello, can I get a link please :* Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.