Jump to content

Recommended Posts

Posted

Does anybody have any tips for improving the ability to see out of one of these lids?<br>

For example is it better to go with the hard hat liner over the padding to position the helmet at a better angle to look through the eyes? Perhaps somebody has found a better method for trimming the eyes or mounting the lenses that improve your ability to see?<br>

I'm guess this is just the way that it is, and probably one of the many reasons we need handlers.

  • Like 1
Posted

Just the way it is ;)

  • Like 1
Posted

When I first built my bucket, I installed a 1 inch thick foam liner in the top, as this seemed to be the popular way to do it.  I noticed after my first troop that I was constantly tilting it forward just to be able to see anything below the horizon point, so I removed the top liner and bingo!  I can see MUCH better 

  • Like 1
Posted

A chin strap helps a lot, by helping keep the helmet in place, even when bowing your head to look down.

Posted

 I feel visibility will always be limited, outside of trying to maximize the little we have by adjusting the padding or straps inside.

 

 I actually stepped on/kicked a child last time I was wearing my suit. Right in front of her dad and mom :shok:. She must have been right next to me as I tried to side step. She was staring me down as she walked away, haha. I apologized of course but still, never feels good.

  • Like 2
Posted

A chin strap definitely helps. I have a hero bucket, with bubble lenses so my field of view is even less that a regular stunt TK as you can only look directly out the front otherwise you see distortion and your eyes will get strained really fast. The chin strap holds the helmet firm and I've learned to turn my head to look not my eyes. 

  • Like 4
Posted

Yeah you learn to look ahead and prepare for obstacles.

  • Like 2
Posted

I feel visibility will always be limited, outside of trying to maximize the little we have by adjusting the padding or straps inside.

 

I actually stepped on/kicked a child last time I was wearing my suit. Right in front of her dad and mom :shok:. She must have been right next to me as I tried to side step. She was staring me down as she walked away, haha. I apologized of course but still, never feels good.

I dunno. For all I know you might have really poor cardio or be a super chicken but I bet you could have still beaten her up if nobody was watching. I kid, I kid... Wasn't like you did it on purpose. This is actually one of the things that terrifies me about trooping and what prompted me to post the question after reading about somebody else clocking some poor kid with their blaster. I think I'm going to keep mine holster.
  • Like 1
Posted

Yeh, the small kids thing is a bit of a challenge :D. The last troop I was on, I wondered why my legs wouldn't move, and a very small kid, maybe 4 years old, had clamped his arms around my legs :D. Sometimes the only way you can see 'em is by shifting your eyes downward and looking through the frown or under the rim of the helmet.<br>

Always check for klingons before moving 'anything' :D

  • Like 3
Posted

I dunno. For all I know you might have really poor cardio or be a super chicken but I bet you could have still beaten her up if nobody was watching. I kid, I kid... Wasn't like you did it on purpose. This is actually one of the things that terrifies me about trooping and what prompted me to post the question after reading about somebody else clocking some poor kid with their blaster. I think I'm going to keep mine holster.

 

 Oh, I definitely could have taken her. It took all my self control to not raise her above my head, screaming like a tusken raider in front of everyone. Just to show dominance, you know.

 

rcGpJ2iA.jpg

 

 And I did narrowly miss someone as I was un-holstering my E-11 for a picture.

  • Like 3
  • 2 months later...
Posted

use less padding in the top.  you should be able to get your eyes dead centre of the bucket eyes.

Posted

A chin strap helps a lot, by helping keep the helmet in place, even when bowing your head to look down.

Where did you get your chin strap or did you make it? Could you post pictures?
Posted

Where did you get your chin strap or did you make it? Could you post pictures?

Hi, I did make it myself. Just a basic 1" wide elastic strap, attached to the ear bolts inside.

 

I've since added more padding to front and rear, which hold the helmet in place just as well as the strap.

  • 1 month later...
Posted (edited)

The main trick for me was getting the top pad thickness right. Ordered a set of MICH / ACH pads, and the 3/4" top pad had me tilting the helmet forward all the time. Removed it, and it sat too low. Solution was a 3/8" green foam pad cut from a sheet of remnant from JoAnn Fabrics, and black automotive fabric glued to the front of it.

 

Just like the rest of the suit, tailor to fit. Chin strap helps a lot too. Made mine removable by adding a snap plate on each side between the foam covering the ear screw and the cheek tear. 

Edited by vettereddie
Posted

I also had a hard time getting the padding right, The military grade padding was a god send in getting it to where the bucket fits perfect. took a few hours of moving padding around inside.. 

Posted

I've messed with the military pads and they never worked out well. When i got my TM Hero helmet  it came with the star shape of 1" foam for padding and a chinstrap. Honestly its the most comfortable padding I've tried. I have it in my Sandtropper helmet and in my Tusken Raider.

 

X4I41LV.jpg

Posted

I used the military pads but not the top one. One narrow one on each side of my forehead and a trapezoid one on each side of the back of my head. It locks in pretty good and with a chin strap it is snug and I can see pretty well. 

Except for the 3' traffic cone in the middle of the sidewalk Halloween night. Honestly, who puts a traffic cone in the middle of a sidewalk.

Posted

I'm mounting the hardhat liner in mine. I know some don't like those, but I wear a hard had at work all day and I'm used to it. Plus I have the experience of being able to making it more comfortable. While I haven't tried it in my bucket, I can say if adjusted correctly, a hardhat liner is quite stable.

  • Like 1
  • 1 month later...
Posted

I'm mounting the hardhat liner in mine. I know some don't like those, but I wear a hard had at work all day and I'm used to it. Plus I have the experience of being able to making it more comfortable. While I haven't tried it in my bucket, I can say if adjusted correctly, a hardhat liner is quite stable.

I have a hard hat liner in my TIE and Scout helmets. I like them better than padding because the helmet is more secure and less hot.

 

 

Sent from my iPhone using Tapatalk

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...