Jump to content

Recommended Posts

Posted

I just got my EIB approval a week ago. Thanks to Andrew one more time.

 

-> http://www.whitearmor.net/forum/topic/37618-tk-71715-requesting-esb-eib-status-anovos-595/

 

But you all know, after the approval is before the approval ;-)

 

So here are the challenges I have to accomplish, to be part of the Centurion ranks:

  • "The trimmed too short forearm coverstrips"
  • Fix the overall look of the armor (trimming and restrapping  the Chest, Back, Kidney, Butt, Shims)
  • Things not recognized right now

So to get started, I will first focus on what Andrew pointed out:

 

"the too short forearm coverstrips"

 

Here's the issue:

 

FISD_Mod_Forearms.jpg

 

For a fast and easy remedy I've got two options:

 

1. Remove the return edge and trim the high corners off the elbow end of the fore arms, or

2. make longer cover strips but still remove some of the return edging, specially those sharp corners.

 

I'm planing on a third option (I hope it's OK for Centurion):

 

3. Iron down the high corners and get the return edge aligned. Here some pics:

 

forearms_trim.JPG

 

But this option will change the overall look of the forarms a little. Is this mod OK when planing on going Centurion?

 

forearm_compare_mod.JPG

 

Please let me know if this is a "no go" for Centurion or not. Thanks...

Posted

Hello Kai,

 

1. Please go ahead and remove the return edge.   You don't need them.    

2. Use a dremel (or your cutting tool) to remove the marked areas and blend it into the rest of the forearms.    This will give you comfort to swing your arms around.

forearms_trim.JPG

 

Hope this helps!

Posted

You are on the right track, and you are not a wannabe, you are a goingtabe Centurion. We are here to help get you there.

 

 

Sent from my iPad using Tapatalk

  • Like 3
Posted

Thanks guys,

 

I let you know how it turns out and post some pics. Because if there are no pics, it never happened ;-)

Posted

Good luck on the mods

Posted

It looks like this really worked well for me. I reironed the return edge to get them aligned.


Here are some pics (Left:before / Right:after):


forearm_final1.JPG


 


forearm_final2.JPG


 


I think I made a good job. What do you think ?


  • Like 1
Posted (edited)

OK. Next up is the following objective:


 


Fix the overall look of the armor (Shins):


 


This one was an easy task. Just needed to trim some off of the bottom:


greaves_trimline.jpg


 


I decided to trim both sides, to keep the look and feel ;-)


FISD_Mod_Greaves.jpg


 


I like the result:


greaves_final.jpg


 


Next step: optimize the overall look of the armor. In particular the chest, back und butt.


Edited by TK-71715
  • Like 1
Posted

I'll be at the Comic Con in Stuttgart tomorrow. So that will be a perfect opportunity to test, the changes I already made.

Posted

I had an awesome time at comic con Germany in Stuttgart. I had my armor on for almost 9 hours. No real issues while trooping. Not even armor bites ;-) <br>

So back to topic. Centurion is waiting :-)

Posted

Great mods so far, keep up the good work.

 

 

Sent from my iPad using Tapatalk

  • Like 1
Posted

Thank you Andrew. I do the best I can :smiley-sw013:

 

Here's one major mod I did before Comic Con.

 

It addresses the issue -> Fix the overall look and fit of the armor (Chest, Back, Butt):

 

I had a little overlap at the back:

back.jpg

 

and the chest could come up a little:

front.jpg

 

Here's the suggestion , Andrew gave me, to pull up the backplate a bit:

FISD_Mod1.jpg

 

But to get the Chest up a bit, I did a little test fitting and came up with the following mod:

Shoulder_Bridge_Trim.JPG

 

Red lines needed to be trimmed and the yellow one shows that I had to pull down the shoulderstraps.

With these changes I could pull up both, back and chest a little more.

But I also needed to trim down the top chest neck area, because otherwise it would be cutting in my throat.

 

1st step -> trim the Backplate (sorry no before pic):

back_final.JPG

 

2nd step -> trim the front neck area on the chestplate:

 

Before and after interior:

chest_neck_int.JPG

 

Before and after exterior:

chest_neck_ext.JPG

 

3rd step -> remove shoulder strap and trim shoulder bridge from the chestplate:

 

Top: Shoulderstrap removed / Middle: Chest cleaned / Below: Chest trimmed:

chest_shoulder.JPG

 

4th step -> get everything together again:

 

Top: before / Below: final chest:

chest_final_compare.JPG

 

When you take a close look at the inner returnedge of the neck area, you can see how much I trimmed off.

 

I'll try to make some new pics, me wearing the "new" armor. So you all can see the major change :jc_doublethumbup:

Posted

It's been a while since my last update. One thing I forgot to mention is I trimmed the lower return edge of the butt plate (sorry no pics , yet). Much better fit now :jc_doublethumbup:

Here's a comperison pic of the front. Left is before and right is after the modifications I made till now:

front_before_after.jpg

 

Only modification I still need to make at the moment is the fitting of the butt plate. But that really gives me a headache. It always slides over the kidney plate, when moving. Still working on this issue, to get it fixed.

And I also need to give the butt plate a hot water bath, to get it closer/tighter to my body(butt). Still peeking out on the sides :blink:

 

Updates coming soon (hopefully). I want my Centurion (add "Money for nothing" melody here)

  • Like 1
  • 3 weeks later...
Posted

I find my lack of updates disturbing :huh: 

Well, currently I'm working on a Jawa costume for my youngest son....so my TK has to wait a little :blink:

Need to get back on track.

  • 4 weeks later...
Posted

So here's my final modification. The Buttplate needed a hot water bath. The Sides stuck out to much.

But I could only pull in 1cm per side. Not much, but it looks better now:
Before:

KidneyBefore.png
After:
KidneyAfter.png

 

Next thing I'll post are the application Photos for my Centurion Status....

Posted (edited)

So here are my first Photos for my Centurion submission, please let me know if there are still some changes needed:

Front:

CentFront.png

 

Left Arms Down:
CentLeftArmsDown.png

 

Left Arms Up:

CentLeftArmsUp.png

 

Left Side closeup:

CentLeftClose.png

 

Right Arms Down:
CentRightArmsDown.png

 

Right Arms Up:
CentRightArmsUp.png

 

Right Side closeup:
CentRightClose.png

 

Back:

CentBack.png

 

So hopefully I get some positive feedback, that I can post all my Pics for my Centurion application ;-)

 

Thanks to all who helped me out with tips and pointing me in the right direction

Edited by TK-71715
  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...