Jump to content

Recommended Posts

Posted

Back Plate -

 

Centurion requirements:

 

•Back plate shall have no, or minimal overlap of the kidney plate. - ✔️

 

•AM chest plate must be replaced with a more screen accurate version. - Not applicable

 

Reference Photo:

c746cd868af6a26d784e6cb216b202fd.jpg

 

My back plate:

8e02092bbef5d40c2d4230438ab8a462.jpg

Posted (edited)

Abdomen Armor:

 

EIB requirements:

•Any gap between the abdomen and kidney armor is no more than 1/2" (12.5mm) wide. - ✔️

 

•Any shims used to achieve this effect are of a similar material and color as the abdomen and kidney armor. Shims fit flush and seams are allowed. - NOTE*AP armor comes with abdomen extensions on both the kidney and abdomen plates that you can trim to your needs without having to install shims - ✔️

 

Reference Photos:

ea514e8933738955bf82591dc738e199.jpg

 

aaf435baaeaeda6ecb30fa21a3599948.jpg

 

My Abdomen Plate:

010dd028d94c6c2bda81e0b4bfc9d97d.jpg

 

f146155d528310b3e4f47e8579566ab0.jpg

 

Centurion requirements:

•Ideally there no gap between the abdomen and kidney armor. - ✔️

 

•A single visible seam line is present. - ✔️

 

•Three rivets, approximately 5/16"(8mm) diameter, are present on the left side of the abdomen armor. - ✔️

Note: The original rivets used for the TK armor were bifurcated rivets or split rivets.

Rivets are equally spaced along the depth of the armor and about 10mm from the edge.

The heads are rounded or domed.

Note: Paperclip brads are not considered to have a domed head.

 

Reference Photo:

191bc804a82a362f2c2b29e0ada5d4de.jpg

 

•Rivets are painted white. - ✔️

 

•A single split rivet or brad is present on the lower tab of the abdomen armor. - ✔️

 

Reference Photo:

7459739b616b027b38c650d60064ae23.jpg

 

My lower tab:

75141d77aac81a95f336660b3eb53595.jpg

 

•A single male snap on the top right corner of the ab plate is present. Rivet does not need to be functional. - ✔️

 

Reference Photo:

fe0a7032a5efe8f43b3077db532c70b6.jpg

 

•Abdomen armor buttons are integrated and painted directly on the armor. No separate buttons are allowed. - ✔️

 

Reference Photos:

e6ef3ddc924d79614b4f01e6e371a776.jpg

 

12f722c5b01593dd82489a36c6308214.jpg

 

My Abdomen Buttons:

5d54c98aff97e859b31cf063db23bda4.jpg

Edited by Pyrates
Posted

One set from JustJoseph63 - which can be obtained from our "On-Going" sales forum here:

 

 I intend to get his "Alternative Style/ Hero Guards" as a later upgrade as funds are a bit tight at the moment.

 

 

I'll bring a set of the white silicone "Alternative" hand guards to give to you at C8, Aaron.  It's the least I could do for all your work on the racing shirt run.  (Just remind me a week ahead of time).

  • Like 1
Posted (edited)

I'll bring a set of the white silicone "Alternative" hand guards to give to you at C8, Aaron. It's the least I could do for all your work on the racing shirt run.

Thank-you very kindly Joseph !!! And will do! Edited by Pyrates
Posted

Troopers helping Troopers who help other Troopers, bro.

  • Like 1
Posted

Troopers helping Troopers who help other Troopers, bro.

WHOOO-WAHHH!

  • Like 1
  • 3 weeks later...
Posted

Alright time to wrap this thread up...

 

Kidney Plate -

 

Centurion requirements:

•Cut-out notches at the bottom of right and left sides of the Kidney Armor are optional.

If present, each notch is approximately 22 mm tall and the back of the notch ideally is aligned with the front edges of the Posterior Armor plate. - ✔️

 

Reference Photos:

4886b58cf63c6895fd3f8591b6773a19.jpg

 

e7ded6be65b2cc2b6aa5b6987d690525.jpg

 

My Kidney Plate:

77932c7042ed66c77792a2ce08eb2e94.jpg

 

feff63e0598b930f69b39f5302ea7b59.jpg

 

•Three rivets, approximately 5/16"(8mm) diameter, are present on the left side of the kidney plate.

Note: The original rivets used for the TK armor were bifurcated rivets or split rivets.

Rivets are equally spaced along the depth of the armor and about 10mm from the edge.

The heads are rounded or domed.

Note: Paperclip brads are not considered to have a domed head. - ✔️

 

Reference Photo:

3d66b37e8258cfa751ce6fc45abd9287.jpg

 

My Kidney Plate:

5f3b79b3df76a7bd509156704d765ad7.jpg

 

Rivets are painted white. - ✔️

  • Like 1
  • 1 month later...
Posted

My apologies for the delay - Celebrations and Expos happen

 

Posterior Plate (Butt Plate) -

 

EIB requirements:

 

•Two male snaps are present on the lower center tab of the Posterior Armor.

Snaps do not need to be functional. - ✔️

 

Reference Photo:

42729c252e465bcac085fa3bceff0bc3.jpg

 

My Posterior Plate:

2ec20cec3c4defcac9deac4a44b48748.jpg

Posted

The Waist Ammo Belt -

 

EIB requirements:

 

•There shall be three square buttons, one centered in the middle and one on each end of the plastic ammo belt. - ✔️

 

Reference Photos:

 

***It's also good to take notice where the belt sits on the Abdomen Plate near the buttons to make sure your belt is sitting at the proper height***

 

719bfb9cf421e1aea80845e011806d07.jpg

 

f9173809937de5cad46b7c2843a88758.jpg

 

My Waist Ammo Belt:

d176e05a85473c264141e4f7e0b03269.jpg

 

 

Centurion requirements:

 

•Drop boxes must have full inner drop boxes to close the back. Flat covers are not allowed. - ✔️

 

Drop boxes are vertically aligned with the end of the ammo belt with minimal gap between belt and box. - ✔️

 

The corners of the plastic ammo belt shall be trimmed at a 45 degree angle. - ✔️

 

Reference Photos:

1965bafe89c17c02f695b6fc4784777e.jpg

 

5eae59caaf56fff7046190cd830ddad6.jpg

 

2cb81e2f34eae30da1cf6d724134e716.jpg

 

My Waist Ammo Belt:

baa5b0992df8b1be9d9156974c08e3e5.jpg

 

ccaa006e6ab1a9ec3df0c5f61c07bcae.jpg

Posted

Thermal Detonator -

 

EIB requirements:

 

•Thermal detonator belt clips are positioned with little to no gap between the clips and the end caps. - ✔️

 

Reference Photo:

a756961812248373afb9bab0a7a1e5ff.png

 

My Thermal Detonator:

ae05e8be9275e398ecdbd03f23c17f24.jpg

Posted

Thigh Armor -

 

EIB requirements:

 

•Thigh ammo belt is attached to thigh with a solid head rivet or fastener in the upper corner and fastened to the lower thigh ridge.

The solid head rivet attachment is painted white. - ✔️

*Standard pop rivets are not allowed

 

The bottom corners of the thigh ammo belt are rounded off. - ✔️

 

Reference Photos:

996f25332ba808e3167e4933e10a0f65.jpg

 

My Thigh Armor:

afbf01ab470ab44a39420cb81c4b5b04.jpg

 

9ddb5fdb1f4f628de41f1264d3866bb0.jpg

 

 

Centurion requirements:

 

Thighs are constructed using the butt joint and cover strip method. - ✔️

*Overlap construction is not allowed.

 

Reference Photos:

d6949eef4737aba2b047a39a72771cb6.jpg

 

ba23413294e3bdd2667fbc5b866b5954.jpg

 

b5369984d204a0327e1d8180335b0367.jpg

 

d6a8b0445537a37d4a624dd7b5f890e6.jpg

 

My Thigh Armor:

22a4ef7b4a1c0ffb231cac669abdf3ee.jpg

 

e18d99bfd9c5a046702ea4f9e5a8c07e.jpg

Posted

Lower Leg Armor -

 

EIB requirements:

 

Sniper knee plate is aligned with the ridges on the shin. - ✔️

*Sniper knee plate does not have visible rivets or fasteners attaching it to the shin.

 

Reference Photos:

ddea7496dd9fd5369e93697e7137607d.png

 

f21084725400ad683e9c35b23e442e89.jpg

 

My Lower Leg Armor:

3f7ffca2c5c3ca06fdf2d3d30ee8db63.jpg

 

9cf3393ec347af5879f9a747e39ef71d.jpg

 

2a7a8dfb0a6a5071df38457a2c5ac40f.jpg

 

 

 

Centurion requirements:

 

Lower legs are constructed using a butt joint and cover strip method. - ✔️

*Overlap construction is not allowed.

 

Reference Photos:

a6681a17c01b3be664e9a24c2ffaf61d.jpg

 

0087bf2b8997db00b1e21ee95f868c52.jpg

 

917393203208fddc9caccb48a21a864a.jpg

 

My Lower Leg Armor:

16172a0564402ed5f853a34d8e208f53.jpg

 

da624a813c8e692f02be144c03a6afab.jpg

Posted

And finally... Boots!

 

EIB requirements:

 

•There is no seam present on the front of the boot. - ✔️

 

Reference Photo:

710b789bfd618f978fdb67c8f09097ae.jpg

 

My Boots:

7ec43b1b42b581cfe53d315d3b655650.jpg

Posted

Now with all the requirements met, there is one trick from Tony (Ukswrath) I wanted to share from my original build thread, and no doubt my freaking savior.

 

I'm OCD on trying keep my armor looking as new as possible and wanted to clean it up before taking submission photos.

 

After multiple troops your armor acquires its battle damage - scuffs, scratches, black marks from Vader knows what.

 

In my case one serious 1/16" gouge in my Waist Ammo Belt.

 

Thank you a million times over Tony for telling me about this...

 

The 3M HEADLIGHT RESTORATION SYSTEM

65ce34aaeffc0cbc3b27709e05c0936c.png

 

Now due to being in my neck of the woods, my kit didn't come with a drill attachment so I made my own - break out the McGyver theme music

 

eb2688b29849cd2791e4c78084895f07.jpg

 

6ab65d7cb016a9dc991e38ba7781eab6.jpg

 

7c0f180e76665f2515330a7a1a8d61de.jpg

 

6c93011396ba305bd392bcdf1e10ff2c.jpg

(Rubber Isolation Pad for air conditioning)

 

e422bfdb05e41b598d500f9154e90daa.jpg

 

cd742bebae8cc12ca2c98fd30f6bf87c.jpg

 

befebd6dbe6cac250c01ac42d63f717d.jpg

 

b3702bbe62e4333a10af7ff28e94d29b.jpg

 

21742a412fb07a9d176689e1be4462db.jpg

 

8158991cbcfad263f01abef3c6f29dc0.jpg

 

c10cdb8e0b2ab0e74b4646b5e9896dce.jpg

 

1be1620210e5883077d571b1f5b77d09.jpg

 

3e51464af02fda77fd7d05e5e1b60b94.jpg

 

8ba8904de7a4cc6684c7c32d6b3d9238.jpg

 

8672a0c02978c2f31396f90869b756a0.jpg

Posted

Here's a before picture:

 

f561f3f103492e6e86f9af4f94316aa0.jpg

 

And after using Novus 3 Heavy Scratches, then Novus 2 Light Scratches, then the 3M Buffing Compound that comes with the kit.

 

After all of that I sprayed Novus 1 Revitalizer to clean everything up.

3e42eb165a9a50fdb881a9a3be4ee18e.jpg

Posted

To remove all your black marks from your armor BEFORE polishing use Mr.Clean Magic Erasers

26c840144048a0f74af3232607268f77.jpg

Posted

Gentle reminder to all that you must apply for your EIB qualification BEFORE you apply for Centurion.

 

Taking all the photos you need has been made easy peasy thanks to Star Raider TK - 4524, and can be found here:

 

http://www.whitearmor.net/forum/topic/22604-expert-infantry-application-photo-checklist/#entry544510

Posted (edited)

It's extremely helpful if you have a fellow member assist you while taking your photos to make sure you're looking your best.

 

I encourage fellow troopers to get in touch with their local Attaché to see if they can come help.

 

If you don't know who your local Attaché is then they can easily be found thanks to "justjoseph63" TK - 10963 in the link below:

 

http://www.whitearmor.net/forum/topic/38483-fisd-imperial-attache-list/

Edited by Pyrates
Posted (edited)

Once you submit your photos, then it's just like when you first applied to the 501st. Our freaking stellar Deployment Officers will be with you as quickly as they can to guide you along to the path to Centurion.

Edited by Pyrates
Posted (edited)

Once you receive your EIB number, you can then get your Centurion application under way - after any corrections that need to made.

 

The Centurion Photo checklist can be found here, thanks again to "Star Raider":

 

http://www.whitearmor.net/forum/topic/22605-centurion-application-photo-checklist/

Edited by Pyrates
Posted (edited)

Now to close this thread out in Pyrates fashion...

 

https://youtu.be/KNjhiGHpaGU

 

I owe many profound thanks to (and in no particular order):

 

My Attaché Boss - justjoseph63

Marc - CTID

Andrew - Sly11

Tony - Ukswrath

Tim - DarkCMF

Paul - Daetrin - The Boss

Mathias - Locitus

Brad - 68Brick

Dan - TK-2759

Kris - Haso

Steve - starsaber25

Jorge - zv288bot

James - Kaar121

Gary - Sentry71

Spencer - Jinsei

Preston - Pretzel

Dave - ComradeDave

The entire Badlands Garrison

"My TK Twin" Teresa - Soulart

And last but definitely not least my brother in Arms Peter - Barcode

 

Many appreciative thanks again to you all for your support, encouragement, leadership and camaraderie - chest thumps and a TK fist raised high in your names.

 

Rock on my fellow Troopers - Rock on!

 

 

cf19c27802ed6783e74dd5090a8a0bb5.jpg

 

268c81bc59452628c8adc16937b5c639.jpg

Edited by Pyrates
Posted

Now to close this thread out in Pyrates fashion...

 

https://youtu.be/KNjhiGHpaGU

 

I owe many profound thanks to (and in no particular order):

 

My Attaché Boss - justjoseph63

Mark - CTID

Andrew - Sly11

Tony - Ukswrath

Tim - DarkCMF

Paul - Daetrin - The Boss

Mathias - Locitus

Brad - 68Brick

Dan - TK-2759

Kris - Haso

Steve - starsaber25

Jorge - zv288bot

James - Kaar121

Gary - Sentry71

Spencer - Jinsei

Preston - Pretzel

Dave - ComradeDave

"My TK Twin" Teresa - Soulart

And last but definitely not least my brother in Arms Peter - Barcode

 

Many appreciative thanks again to you all for your support, encouragement, leadership and camaraderie - chest thumps and a TK fist raised high in your names.

 

Rock on my fellow Troopers - Rock on!

 

 

cf19c27802ed6783e74dd5090a8a0bb5.jpg

 

268c81bc59452628c8adc16937b5c639.jpg

Now to get those beauties framed!

 

Sent from my SM-G920F using Tapatalk

  • Like 1
Posted

Now to get those beauties framed!

 

Sent from my SM-G920F using Tapatalk

Cheers mate and will do!

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...