kkpham72 Posted April 17, 2016 Report Posted April 17, 2016 (edited) Basic Information Name: Kelvin Pham 501st TK ID: 81890FISD forum name: kkpham72Garrison: Southern California Garrison501st Legion Profile: http://www.501st.com/members/displaymemberdetails.php?userID=19971 Mandatory Information Armor Maker: AM 2.0Helmet Maker: AM 2.0E-11 Blaster: Hyperfirm Elite Optional Information Height: 5'9 Weight: 155 poundsBoots: Imperial Boots Canvas belt: Rob KittellHand Plates: AM 2.0Electronics: AKER voice Amp, MP3 chatter, Fan Neck Seal: UnknownHolster: Darman Edited April 20, 2016 by kkpham72 Quote
cjdesign[TK] Posted April 17, 2016 Report Posted April 17, 2016 (edited) Good job! FYI.. Some pieces are not am 2.0. the curved kidney and return edges on the posterior parts look like NE. Edited April 17, 2016 by cjdesign 1 Quote
Sly11[Admin] Posted April 18, 2016 Report Posted April 18, 2016 Hi Kelvin, we are running a little behind with applications at the moment, but will be with you soon. In the meantime, I can give you the opportunity to fix the large gap between your shoulder bells and chest plate. If you could adjust and post up a new photo that would be great. Can you please also include a photo of the end of your blaster showing the D ring. Many thanks for your patience. Sent from my iPad using Tapatalk Quote
kkpham72 Posted April 18, 2016 Author Report Posted April 18, 2016 Good job! FYI.. Some pieces are not am 2.0. the curved kidney and return edges on the posterior parts look like NE. Thanks brother I bought the whole kit from AM. So maybe similarities in the pieces. Now I want to see the pieces side by side haha Quote
kkpham72 Posted April 18, 2016 Author Report Posted April 18, 2016 Hi Kelvin, we are running a little behind with applications at the moment, but will be with you soon. In the meantime, I can give you the opportunity to fix the large gap between your shoulder bells and chest plate. If you could adjust and post up a new photo that would be great. Can you please also include a photo of the end of your blaster showing the D ring. Many thanks for your patience. Sent from my iPad using Tapatalk No problem I'll have pics posted to you asap Quote
blackyck[501st] Posted April 18, 2016 Report Posted April 18, 2016 (edited) Edited April 18, 2016 by blackyck Quote
kkpham72 Posted April 18, 2016 Author Report Posted April 18, 2016 get it Kelvin! I've been putting this off long enough hahah 1 Quote
blackyck[501st] Posted April 18, 2016 Report Posted April 18, 2016 So shiney Sent from my iPhone using Tapatalk Quote
kkpham72 Posted April 18, 2016 Author Report Posted April 18, 2016 Hi Kelvin, we are running a little behind with applications at the moment, but will be with you soon. In the meantime, I can give you the opportunity to fix the large gap between your shoulder bells and chest plate. If you could adjust and post up a new photo that would be great. Can you please also include a photo of the end of your blaster showing the D ring. Many thanks for your patience. Sent from my iPad using Tapatalk Here is shoulder bell and chest plate gap fixed and updated picture. i also uploaded the picture of the "D Ring" into the post itself Quote
CRISTONAMO Posted April 18, 2016 Report Posted April 18, 2016 Good luck Kelvin! #unicornsquad is getting accurcate! Quote
kkpham72 Posted April 18, 2016 Author Report Posted April 18, 2016 Good luck Kelvin! #unicornsquad is getting accurcate! Cristian Thanks Bro ! Been procrastinating long enough lol Quote
ukswrath[Staff] Posted April 20, 2016 Report Posted April 20, 2016 Hey Kevin ca we get an action shot picture also. Thank you 1 Quote
kkpham72 Posted April 20, 2016 Author Report Posted April 20, 2016 Hey Kevin ca we get an action shot picture also. Thank you Here is action shot Quote
ukswrath[Staff] Posted April 21, 2016 Report Posted April 21, 2016 Hey Kelvin, thank you for your patience and EIB application. We also want to thank you for making the suggested adjustments, updating or adding required images. Let's get to it shall we. CRL and EIB Application Requirements: All requested photos are present and your armor meets all the requirements set out for EIB. Sly and myself would like to congratulate you on achieving Expert Infantry rank!! Great job trooper Other-Armor Fit/Assembly: In this section we discuss observations made by your fellow troopers as well as our own. Though the suggestions are to make you look your best none of the following suggestions will effect your EIB application. 1) We would like to see you either bring your thighs up, shins down or both to reduce sniper knee to thigh overlap. Some is ok but yours are a bit excessive. Could be a simple shin adjustment Reference photo 2) Frown ends. Though not critical they should come to a point at the ends. This one looks squared off. Quick and simple Reference photo Centurion suggestions: In this section we try to prepare you for Centurion. Sly, myself or your fellow brothers may suggest areas needing improvement. We have a few areas we would like to see addressed if you choose to shoot for Centurion. 1) According to the CRL the forearms are to have no return edge. You'll need to remove all the return edge in the illustrated locations For level three certification (if applicable): No return edge on the inside of the front of the forearm is allowed. Reference photo Just a few adjustments and we'll see you at Centurion. Again, Great job! Quote
kkpham72 Posted April 21, 2016 Author Report Posted April 21, 2016 Hey Kelvin, thank you for your patience and EIB application. We also want to thank you for making the suggested adjustments, updating or adding required images. Let's get to it shall we. CRL and EIB Application Requirements: All requested photos are present and your armor meets all the requirements set out for EIB. Sly and myself would like to congratulate you on achieving Expert Infantry rank!! Great job trooper Other-Armor Fit/Assembly: In this section we discuss observations made by your fellow troopers as well as our own. Though the suggestions are to make you look your best none of the following suggestions will effect your EIB application. 1) We would like to see you either bring your thighs up, shins down or both to reduce sniper knee to thigh overlap. Some is ok but yours are a bit excessive. Could be a simple shin adjustment Reference photo 2) Frown ends. Though not critical they should come to a point at the ends. This one looks squared off. Quick and simple Reference photo Centurion suggestions: In this section we try to prepare you for Centurion. Sly, myself or your fellow brothers may suggest areas needing improvement. We have a few areas we would like to see addressed if you choose to shoot for Centurion. 1) According to the CRL the forearms are to have no return edge. You'll need to remove all the return edge in the illustrated locations For level three certification (if applicable): No return edge on the inside of the front of the forearm is allowed. Reference photo Just a few adjustments and we'll see you at Centurion. Again, Great job! Thanks you and I'll have the minor adjustment done for centurion Quote
fuumantroop[TK] Posted April 22, 2016 Report Posted April 22, 2016 Great work! Oh and to help from your sniper knee catching under your thigh, you can put some foam in the inside of your thigh armor on the back side, this will keep the front of your thigh right on the front of your leg. Then, another piece of foam, and install it inside the front of your shin, this will help push that sbiper knee out a little more as well. Just a friendly tip it has surely helped me out lol Quote
Order-66[TK] Posted April 22, 2016 Report Posted April 22, 2016 Congrats Kelvin!! I have seen you build armor and help others build. These adjustments will be easy for you. Congrats again. Quote
kkpham72 Posted April 22, 2016 Author Report Posted April 22, 2016 (edited) Great work! Oh and to help from your sniper knee catching under your thigh, you can put some foam in the inside of your thigh armor on the back side, this will keep the front of your thigh right on the front of your leg. Then, another piece of foam, and install it inside the front of your shin, this will help push that sbiper knee out a little more as well. Just a friendly tip it has surely helped me out lol Thanks brother I have foam in my things I just need to pull my thighs up and adjust the foam Edited April 22, 2016 by kkpham72 1 Quote
kkpham72 Posted April 22, 2016 Author Report Posted April 22, 2016 Congrats Kelvin!! I have seen you build armor and help others build. These adjustments will be easy for you. Congrats again. Thanks brother ! Quote
kkpham72 Posted April 22, 2016 Author Report Posted April 22, 2016 Congrats Kelvin!! I have seen you build armor and help others build. These adjustments will be easy for you. Congrats again. Thanks brother ! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.