kevin926 Posted March 14, 2016 Report Posted March 14, 2016 (edited) Hello all, I have all the specs I need however I am missing the rear sight specs. I did see the specs on a set that were later called inaccurate and all of the specs were updated and made accurate but I didn't see updated specs for that part. I have a detailed pipe template with the correct specs that everything has lined up perfectly with but when I tried the rear sight specs, they weren't even close. I am using a 38mm pipe so I'm guessing that's part of it. Can anyone guide me to the proper specs or share the measurements. Thanks in advance. Kevin Edited March 14, 2016 by kevin926 Quote
I'm Batman[501st] Posted March 14, 2016 Report Posted March 14, 2016 I only have resin sights on my blasters. Very old molds at that. Hopefully someone with a real sterling will chime in soon for you. Quote
AWOL Posted March 16, 2016 Report Posted March 16, 2016 If you don't get any measurements before Saturday I'll measure my sterling sight and let you know... if it works kick it, if it doesn't work kick it till it does... Quote
kevin926 Posted March 16, 2016 Author Report Posted March 16, 2016 If you don't get any measurements before Saturday I'll measure my sterling sight and let you know... if it works kick it, if it doesn't work kick it till it does... Thank you. Quote
Tr00per Posted March 19, 2016 Report Posted March 19, 2016 (edited) how does one measure a rear sight with all the curves and being intakt ? What measure do you need ? Another cheap way is this --------- Edited October 8, 2021 by gmrhodes13 link not working removed Quote
kevin926 Posted March 19, 2016 Author Report Posted March 19, 2016 (edited) On 3/20/2016 at 3:40 AM, Tr00per said: how does one measure a rear sight with all the curves and being intakt ? What measure do you need ? Another cheap way is this --------- thanks for the link. you are correct on how could you measure the rounded parts.Its tricky but could be done with listing degrees. If you have the height. length and width then you would just need the radius. I was hoping for a template. Edited October 8, 2021 by gmrhodes13 link not working removed Quote
Tr00per Posted March 19, 2016 Report Posted March 19, 2016 thanks for the link. you are correct on how could you measure the rounded parts.Its tricky but could be done with listing degrees. If you have the height. length and width then you would just need the radius. I was hoping for a template. That's something i can't help you with.. Quote
AWOL Posted March 20, 2016 Report Posted March 20, 2016 On 3/20/2016 at 5:41 AM, kevin926 said: thanks for the link. you are correct on how could you measure the rounded parts.Its tricky but could be done with listing degrees. If you have the height. length and width then you would just need the radius. I was hoping for a template. Sorry for the crudeness of the drawing, my laptop is in the truck... The pin through the centre holding the foldable sight is 5.6mm... If you remove the end cap the sight is mounted 20.65mm from the end of the tube... Hope this helps... if it works kick it, if it doesn't work kick it till it does... Quote
kevin926 Posted March 20, 2016 Author Report Posted March 20, 2016 (edited) Perfect and thankyou. This will work. I used your drawing and measured my doopy one and they are really close. The biggest issue on the doopy is the bottom plate is off being 3mm too thick. The rest of the doopy site is as close as a 100th of an inch so I thick I can template the doopy onto aluminum and just rework the bottom plate , thanks again. Kevin Edited March 20, 2016 by kevin926 Quote
AWOL Posted March 20, 2016 Report Posted March 20, 2016 Perfect and thankyou. This will work.You're welcome...I look forward to seeing your result... if it works kick it, if it doesn't work kick it till it does... Quote
AWOL Posted March 20, 2016 Report Posted March 20, 2016 thanks again. Kevin Kevin's helping Kevin's if it works kick it, if it doesn't work kick it till it does... Quote
kevin926 Posted March 20, 2016 Author Report Posted March 20, 2016 (edited) that's how kevin's roll Edited March 20, 2016 by kevin926 Quote
Tr00per Posted March 25, 2016 Report Posted March 25, 2016 Just wanted to share a rear sight ^^ Quote
kevin926 Posted March 25, 2016 Author Report Posted March 25, 2016 Is that light from the muzzle? Cool Quote
Tr00per Posted March 25, 2016 Report Posted March 25, 2016 (edited) Yes.... But it's about the rear sight ^^ Edited March 26, 2016 by Tr00per Quote
kevin926 Posted March 26, 2016 Author Report Posted March 26, 2016 Yes....But it's about the rear sight ^^ I can't help be feel there is a riddle hidden somewhere in this picture. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.