Runnriottt Posted May 29, 2008 Report Share Posted May 29, 2008 I thought I would start a thread on my new rig, going for ESB Elite. This is a ground up build, save for boots and gloves. This suit will have sound, and should be a blast to wear. So far, parts in hand dedacated to the build, Darkside trooper boots Love them, fit great and troop well. Also higher upper than the CAboot. No CAboot smell... Undersuit modded for the soundboard. This suit has all the hook ups for the TrikSound board, and will do blaster fire and static burst. There is an inner glove, with the buttons sewn in for the activation of the sounds. Completely hidden from view. The board sits in a pouch on my chest, under the armor. It also plays lines from the movie, although New Hope... Just for fun. I will mount my speaker system in the chest and back armor. There will also be speakers in the Hovies, but I havent decided on the config for that as of yet. All will be completly hidden and fully intagrated in the suit as I build it. Kinda ugly right now, but Hey, not known for sewing. I might revisit this later, I have some other ideas floating in my head. Gloves are the Novamex type flight gloves with the leather palms. I will have a set of screen look rubber gloves, but probably wont troop them. Neck seal Best neck seal I have ever seen, and now I own... Thanks Riviting! As I recieve my parts, I wanted to make kind of an online diary on the build, so you all can see this come together as well. I am really excited to finaly get a very close to screen suit, Support a great artist, and have a prop that will last a long long time. TM armor on order as well as the Stickers for the Helmet. I wont miss the FX, although it served its master well... All thats left to sort is my blaster. What ever it is, I want the full ESB, even if I have to make the Greeblies. Hope you all enjoy my thread. I hope to use advice from you all as well. Even old dogs can learn new tricks. Quote Link to comment Share on other sites More sharing options...
Guest TK-2416 Posted May 29, 2008 Report Share Posted May 29, 2008 Wow!! That is soo cool Nathan!! This is going to be something special!! I will follow this thread with full attention.. and popcorn Good luck!! Quote Link to comment Share on other sites More sharing options...
TK1491 Posted May 29, 2008 Report Share Posted May 29, 2008 congrats! Should be fun... Quote Link to comment Share on other sites More sharing options...
Runnriottt Posted May 29, 2008 Author Report Share Posted May 29, 2008 As I make the desisions on what parts to use, I will show all the parts I have had over the last 3 years. Wow. 3 years. I have kinda gone the long way to figuring out what I wanted, so Ill share what pics I kept and I am hoping that helps soe of the newer guys. Here are some shots of the two of the best Mic tips out there. Stompers have the wire for the speakers and the Keith have the white base. My personal fav are Stompers. They have a more rugged look. I like that. The biggest diffrence I see is the Screen, but I am not an expert on what screen is correct. These were hard to photo... Quote Link to comment Share on other sites More sharing options...
Runnriottt Posted May 29, 2008 Author Report Share Posted May 29, 2008 Two makes of amps, one from Triktoys and one from Skullworks. I own both systems in there full form. The skullworks is with out its binders. I have it taken apart for the intall into my Scout lid soon. I feel the Skullworks is better for the Scout, as far as I know none of the Scout lines had static or click. I like the clean look of the SW, but there is alot to mount. Takes some careful positioning to get it all in there. It is also an unpowered mic as far as I remember. The Trik Toys system is much improved from the time it first came out. I didnt like the headset and amp by itself, but add the board, and whammo! Diffrent rig all together. Gobs of cord. I will shorten this to be perfect, or they will be hidden perfect. I also dont like the headset look. I will either mod these to fit in the bucket with a quick connect, or just bite the bullet and live with it and paint em. The word perfect on the side has to go... This system uses a powered mic, so the power box needs mounting. I havent decided if I will use the mic tip speakers. I have had horrid feedback problems in the past, and want these to be loud. The answer I thin at this time is to build it into the chest and back. I have also ordered a Newton, It will probably replace the radioshack pictured. The RS will go to the scout, He has pockets. This is the peak of portable speakers. These sound great. Wow. Bass and everything. This will be the basis of my Vader. If I was a sandy, these would sound great in a modded ammo pouch. This is the JBL ontour. I have 2, and Vader is LOUD! I play MP3 right now on an Ipod, but someday when the Vortex2 comes back out, Its on. One thing is for sure. I need rechargeable batteries. Quote Link to comment Share on other sites More sharing options...
Daetrin[Admin] Posted May 29, 2008 Report Share Posted May 29, 2008 Good to see an ESB thread, and a ESB trooper in progress. Quote Link to comment Share on other sites More sharing options...
riveting Posted May 29, 2008 Report Share Posted May 29, 2008 Look's like this is a thread worth bookmarking Quote Link to comment Share on other sites More sharing options...
Runnriottt Posted May 29, 2008 Author Report Share Posted May 29, 2008 Thanks guys! Reserch. Kinda fun, get to watch the movie. All of these shots are from the Original movie. I wanted to not use the Special Edition. So these are circa 1980. ESB is not a Trooper Intense movie. I think (might be wrong) ROTJ and ANH have more troops. There is really only Bespin that involve TK's. That being said, I want to shoot for a well groomed trooper. Now for some screen shots. I have to say, that Stukatrooper has a great tutorial on Flickr. He has an awsome TM setup. I will be using some of his ideas and pictures. I think he linked it here, I will remove if asked, but what a great set of pics. Thanks Stuka! Stuka's TM Build Watching the movie, There are alot of diffrences in the troops. Most notably IMO the way the helmets are. The troop I am shooting for is this guy in the foreground.. I also like the background trooper. Notice on the above pic the trooper in the back dosent have his bicep on right... Here are a few oddities I noticed...Can you find them? Mr Duct tape Mr sholder bell Mr No vent sticker... I also noticed the brow trim. I like the low brow look, but the mid is growing on me. Check out these two... Dude in the back is wonky brow... wow. Quote Link to comment Share on other sites More sharing options...
The other Jay Posted May 29, 2008 Report Share Posted May 29, 2008 The "wonky brow" one looks like the Christie's helmet...the complete one, not the first one. I'll be watching this thread closely, ESB is the way to go for all discerning troopers. Quote Link to comment Share on other sites More sharing options...
firebladejedi[TK] Posted May 29, 2008 Report Share Posted May 29, 2008 Awesome thread Nathan i look forward to seeing what you come up with Quote Link to comment Share on other sites More sharing options...
Runnriottt Posted May 30, 2008 Author Report Share Posted May 30, 2008 With the FISD helping along, this should be an awesome suit. Thanks guys. Here is a couple shots again from the movie... High and low brow... Flat lenses. I never saw a set of hero in the whole flick... One more comp shot... Here is the TK409 and Riviting's neck seal. 409 on the left... Quote Link to comment Share on other sites More sharing options...
Runnriottt Posted June 4, 2008 Author Report Share Posted June 4, 2008 My VaderDave ab buttons came in today... Wow. Nice stuff. As well as 4510's ESB Stickers. These are sweet as well. Stomper Hovies to round out the Lid. Quote Link to comment Share on other sites More sharing options...
Runnriottt Posted July 9, 2008 Author Report Share Posted July 9, 2008 FBJ and I had an awesome trade, and the belt is a great one! Whoo Hoo! Even has the extra plastic for the holster I needed! Thanks! Riviting, flat out the best dang neckseals ever. Great stuff. I have 2. One for my ANH and one for the ESB. Thanks! Ordered a blaster, makerofthings resin MR copy. Should fill the holster well. Scored some keith V2 mic tips, Dont know what I am doing with those yet... but I have a set. LOL... I do think I will use stompers. So making progress. I am off tommorow to look at a hardware store closing down. I am looking for rubber trim... Quote Link to comment Share on other sites More sharing options...
littledragon88[TK] Posted July 11, 2008 Report Share Posted July 11, 2008 I noticed this when I watched a HD-version of ESB. In one of the scenes when Leia, R2, C3PO, Chewie and Lando is racing back to the Falcon - being chased by stormtroopers. When they reach the landing platform, Leia turns around, shoots and hits one trooper. When watching the trooper gets hit in slow-mo, one can actually see that they've used white PVC-textile-material (pretty much like the PVC-textile material commonly used in the advertisement industry) to replace the shin-armor..so no shin armor when the stuntman gets hit, and only the PVC-material warping up kinda like textile. Quote Link to comment Share on other sites More sharing options...
Runnriottt Posted July 11, 2008 Author Report Share Posted July 11, 2008 Ill have to watch for that. I am looking forward to a day when flexible rubber suits hit the market. That would be cool... I am going to derail a little. Still ESB, but I am so excited I am going to bust over this one... I give you a finaly finished CJ bound Costume Panel Qualed ESB VADER! And to top it, Just recieved today... An ESB JBV1 Helmet. Next to my DPLE Copy ESB helmet on my engraver. (The JB is on the right for all you non Vader heads...) Like a giddy school boy.. I am off to meet Dave Prowse next weekend as Vader. WOW! Quote Link to comment Share on other sites More sharing options...
riveting Posted July 11, 2008 Report Share Posted July 11, 2008 Sounds like a cool weekend you've got planned, don't forget pic's!! The Vader looks great makes me wish I was Taller Quote Link to comment Share on other sites More sharing options...
Runnriottt Posted September 5, 2008 Author Report Share Posted September 5, 2008 I got a great email, and should be trimming plastic next week! You are the man TM! Quote Link to comment Share on other sites More sharing options...
Guest TK-2416 Posted September 5, 2008 Report Share Posted September 5, 2008 WOW! Congrats! Quote Link to comment Share on other sites More sharing options...
Runnriottt Posted September 17, 2008 Author Report Share Posted September 17, 2008 Its here... Man this is a nice kit. I cant get over it. So many details... TM you have talent mate. Quote Link to comment Share on other sites More sharing options...
MandalorianWarrior87 Posted September 17, 2008 Report Share Posted September 17, 2008 Congrats Nathan! Can't wait to see this come together Quote Link to comment Share on other sites More sharing options...
Guest TK-2416 Posted September 17, 2008 Report Share Posted September 17, 2008 Congrats Nathan! Can't wait to see this come together I agree! Man you are doing some serious TK building these days!! Quote Link to comment Share on other sites More sharing options...
Runnriottt Posted September 19, 2008 Author Report Share Posted September 19, 2008 Few more ref shots... I am aiming at a perfected ESB trooper. One that fits the bill. I need to trim the ears, but the hemlet is almost done. I will have something to show this weekend. Man 4510's decals are nice. Looking great on the TM! Here is the armor outta the box... I love that its kinda flexable. A little harder to trim, but Stuka's tips are golden! Great toot man! Quote Link to comment Share on other sites More sharing options...
TK-Viper Posted September 19, 2008 Report Share Posted September 19, 2008 Awesome. Can't wait to see more. Quote Link to comment Share on other sites More sharing options...
MandalorianWarrior87 Posted September 19, 2008 Report Share Posted September 19, 2008 This is looking super nice Nathan. Quote Link to comment Share on other sites More sharing options...
Katchoo Posted September 20, 2008 Report Share Posted September 20, 2008 I'm def. hanging around this one, that armor does look fantastic! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.