SixCrazyPants Posted January 15, 2016 Report Posted January 15, 2016 Hey guys I've dropped a couple posts about the 3D model for the DLT-19, so here's another...except I'm finally starting to print it. This will be my first SW weapon I've done, outside of lightsabers. I can't wait to get this thing done already! 1 Quote
dak[TK] Posted January 15, 2016 Report Posted January 15, 2016 keep the picture coming on this project Quote
ComradeDave[TK] Posted January 20, 2016 Report Posted January 20, 2016 OMG, I've been looking everywhere for the STL files to no avail. Quote
SixCrazyPants Posted January 27, 2016 Author Report Posted January 27, 2016 OMG, I've been looking everywhere for the STL files to no avail. I have them, but it was purchased from a guy on Sketchup, but I'm having to heavily clean up the model, as it was not really intended for 3D printing. I think I saw a new post from the guy who made the 2D plans that everyone uses, that he's going to be releasing 3D models. 1 Quote
SixCrazyPants Posted January 27, 2016 Author Report Posted January 27, 2016 I know I haven't updated my build for a bit. I've been driving for Uber up in Park City, UT for the Sundance Film Festival...needed quick cash to buy my Sandtrooper armor from Walt. Anywho, after printing the grip, I'm not sure the scaling is right? But then of course, it could've been modeled too small. I tried printing the 2D print, and I've seen people say to use 'A4'? I want to get this solved before I continue... Quote
ComradeDave[TK] Posted January 27, 2016 Report Posted January 27, 2016 A4 is the way to go my friend. saves you paper and you can get more of your drawing on each page. Quote
SixCrazyPants Posted January 27, 2016 Author Report Posted January 27, 2016 OMG, I've been looking everywhere for the STL files to no avail. I just spoke to the guy from whom I got my model. He's redoing the model so that it's 3D printer friendly...not sure when he'll be done. When I get it, I'll share his info. 1 Quote
SixCrazyPants Posted March 16, 2016 Author Report Posted March 16, 2016 Lol it seems everyone's getting into the 3D printing of this rifle...anyway the guy with whom I'm working with on this model, just sent me an update on his progress (damn he does amazing work). Gotta say, I can't WAIT to print this beast 2 Quote
LoveMonkey[501st] Posted March 17, 2016 Report Posted March 17, 2016 Lol it seems everyone's getting into the 3D printing of this rifle...anyway the guy with whom I'm working with on this model, just sent me an update on his progress (damn he does amazing work). Gotta say, I can't WAIT to print this beast I can't wait as well. I'm looking for my BFG when the pack is done! Sent from my iPhone using Tapatalk Quote
T K[501st] Posted March 18, 2016 Report Posted March 18, 2016 This looks awesome so far! I'd love to get a DLT someday. Be sure to keep us updated! Quote
SixCrazyPants Posted March 18, 2016 Author Report Posted March 18, 2016 I can't wait as well. I'm looking for my BFG when the pack is done! Sent from my iPhone using Tapatalk We're getting there... Slowly but surely Sent from my iPad using Tapatalk Quote
SixCrazyPants Posted March 25, 2016 Author Report Posted March 25, 2016 Got a screaming deal on a 'build your own blaster' off eBay. Now to get the electronics out and add them to my project. Sent from my iPad using Tapatalk Quote
decius[TK] Posted April 9, 2016 Report Posted April 9, 2016 My printer is begging for this file! Lol 1 Quote
Ollie mills tk[TK] Posted April 10, 2016 Report Posted April 10, 2016 Is this file available some where? Quote
SixCrazyPants Posted April 10, 2016 Author Report Posted April 10, 2016 Is this file available some where? I heard from the guy modeling this, and he apologizes for the time it's taking, but it is coming. He's got half of the model done. When it's done, I'll post his info for you guys to buy it. I should put out there, that he's just offering the model, not to print it. 1 Quote
Ollie mills tk[TK] Posted April 23, 2016 Report Posted April 23, 2016 That's awesome any Idea on how much he would want for the file ? I'm all in Please post when it's ready ✌ Quote
SixCrazyPants Posted April 23, 2016 Author Report Posted April 23, 2016 That's awesome any Idea on how much he would want for the file ? I'm all in Please post when it's ready Not sure how much he's charging just yet. He's in the middle of entrance exams, so it's going to take a little longer. Believe me, I'm just as antsy. The only reason I'm waiting this long, is because the kid is good at modeling, where I'm still a noob. 1 Quote
bluefunoodle311[501st] Posted June 13, 2016 Report Posted June 13, 2016 Following this with great interest. Quote
whiteee Posted June 17, 2016 Report Posted June 17, 2016 nice work - any updates on this project and the stl file? Quote
SixCrazyPants Posted June 17, 2016 Author Report Posted June 17, 2016 It's almost done Sent from my iPad using Tapatalk 4 Quote
SixCrazyPants Posted June 28, 2016 Author Report Posted June 28, 2016 Good news He's finished it and it looks awesome. There are a couple pieces that I asked him to break down even further, for ease of printing and less support (none if possible right?). The best part is, I asked him at one point to look into designing this with the break-down concept for easy transportation, and he did it. I have not printed this yet, so I can't speak as to how well these will join, but I have confidence. If you want the model, email Máté at [email protected] and purchase it from him. Can't wait to see y'all's builds. 2 Quote
decius[TK] Posted June 28, 2016 Report Posted June 28, 2016 Which pieces did you specifically request to be broken down? Sent from my iPhone using Tapatalk Quote
SixCrazyPants Posted June 28, 2016 Author Report Posted June 28, 2016 The muzzle and rear sight. The receiver will probably have to be cut down as well, but we'll see. Sent from my iPad using Tapatalk 1 Quote
T K[501st] Posted June 28, 2016 Report Posted June 28, 2016 Ooo. I can't wait to see this. When printed make sure you bring it to an event soon. 1 Quote
SixCrazyPants Posted June 29, 2016 Author Report Posted June 29, 2016 Ooo. I can't wait to see this. When printed make sure you bring it to an event soon. I haven't even got my armor yet, but when I get this printed, I'll bring it for show and tell 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.