Stvd201[TK] Posted January 14, 2016 Report Posted January 14, 2016 (edited) So here I am at Centurion Application!! I've tweaked, adjusted and improved after taking note of the comments following my EIB App. I've even painted up my blaster in the last two days Thanks for you consideration. BASIC INFOName: Steve DavieLegion ID: 42200Forum ID: stvd201Garrison: Outer Rim Garrisonhttp://www.501st.com...6&costumeID=124MANDATORY INFOArmor Maker: APHelmet Maker: APBlaster Type: Resin Cast (Built by Brett)OPTIONAL INFOHeight: 5' 8.5"Weight: 168lbsBoots Maker: Imperial BootsCanvas Belt: TKittellHand Plate Type: Trooperbay (Latex)Electronics: TK ProductsNeck Seal: DarmanHolster Maker: DarmanMic Tips: KeithInner Drop Boxes: KW DesignsRivets: EchoS-Trim: TrooperbayEIB Thread: http://www.whitearmor.net/forum/topic/33949-tk42200-requesting-anh-stunt-eib-status-ap-510/(NEW)Front - Arms at side(NEW)Back - Arms at side(NEW)Left - Arms raised(NEW)Right - Arms raised(NEW)Button Orientation(NEW)Ab/Kidney Attachment - Butt/Kidney Not Fixed (Outer)Hand Plates(NEW)Shoulder bridge - Back(NEW)Shoulder Bridge - Front(NEW)Back/Chest Connection (Outer)(NEW)Thigh Pack Attachment(NEW)Knee PlateDrop Box - BackCod and Butt plate attachmentsInterior Strapping (shows inner Butt to Kidney, Kidney to Ab and Back to Chest)(NEW)Kidney Plate Notch(NEW)Wrist side of Forearms***Newer - Updated - Wrist Side of Forearms*** HelmetHovi MicsLens Color(NEW)S-TrimNeck SealTD - Back(NEW)Holster Attachment(NEW)E-11 BLASTERThank you for your time. Edited January 16, 2016 by Stvd201 Quote
The5thHorseman[501st] Posted January 14, 2016 Report Posted January 14, 2016 You've made a fantastic work with your armor Steve! Especially the way you fitted the armor parts to you. Well done! I can still see a little excess on your forearm return edges though. It should be completely free of any, including at the ridge section with the square indentations: Quote
justjoseph63[Staff] Posted January 14, 2016 Report Posted January 14, 2016 Awesome job, Steve, and great attention to detail!! If I could make one small suggestion, I noticed that the kidney notch on the right has a sharp angle on the inside, and this could cause it to split or crack at that corner at some point. The one on the left is perfect! A tiny round needle file would round that corner out, or you could glue a small piece of ABS on the inside to prevent that. Good luck, trooper, I think you should have this one nailed! Quote
Snaps[TK] Posted January 14, 2016 Report Posted January 14, 2016 Looks great trooper. Only suggestions I had were already brought up. Good luck trooper! Quote
Stvd201[TK] Posted January 14, 2016 Author Report Posted January 14, 2016 Awesome job, Steve, and great attention to detail!! If I could make one small suggestion, I noticed that the kidney notch on the right has a sharp angle on the inside, and this could cause it to split or crack at that corner at some point. The one on the left is perfect! A tiny round needle file would round that corner out, or you could glue a small piece of ABS on the inside to prevent that. Good luck, trooper, I think you should have this one nailed!Thanks for the feedback, the good thing here is that I made the notch by utilising a 22mm shim! This created a notch without cutting and gave myself some extra room. Plus it also means the abs paste seam worked out good Sent from my iPhone using Tapatalk 1 Quote
Stvd201[TK] Posted January 14, 2016 Author Report Posted January 14, 2016 You've made a fantastic work with your armor Steve! Especially the way you fitted the armor parts to you. Well done! I can still see a little excess on your forearm return edges though. It should be completely free of any, including at the ridge section with the square indentations: Thanks for the feedback. Oh man...it's so close to that square indent it's difficult to file down without taking off length, I will give it a go in the corners and re submit the pic! Want to be sure Quote
Stvd201[TK] Posted January 14, 2016 Author Report Posted January 14, 2016 Just adjusted the wrists!! Not one bit of return left and I made a White spot Thanks guys. Sent from my iPhone using Tapatalk 1 Quote
Vidakovic Igor Posted January 15, 2016 Report Posted January 15, 2016 Looks fantastic Sent from my iPhone using Tapatalk 1 Quote
MechaPumpkin[TK] Posted January 17, 2016 Report Posted January 17, 2016 This is one nice looking set of armour! Great job trooper. Easy pass!! 1 Quote
justjoseph63[Staff] Posted January 17, 2016 Report Posted January 17, 2016 Thanks for the feedback, the good thing here is that I made the notch by utilising a 22mm shim! This created a notch without cutting and gave myself some extra room. Plus it also means the abs paste seam worked out good Sent from my iPhone using Tapatalk Just noticed the seam.. Great job and clever thinking! 1 Quote
Narc[TK] Posted January 17, 2016 Report Posted January 17, 2016 Thanks for the feedback, the good thing here is that I made the notch by utilising a 22mm shim! This created a notch without cutting and gave myself some extra room. Plus it also means the abs paste seam worked out good Sent from my iPhone using Tapatalk We'll talk about the ABS paste. I have to make my shims (yes, multiple, I am not screen accurate svelt) Looks great brother! 1 Quote
Sly11[Admin] Posted January 18, 2016 Report Posted January 18, 2016 Hey Steve!! Thank you for the chance to see this incredible set of armor, and thank you for your Centurion application. Let's take a look! CRL and Centurion Application Requirements: All required submission photos have been posted. It has been determined that your armor displays all the necessary requirements to qualify for Centurion. Ukswrath and I would like to congratulate you on an outstanding build and welcome you to the rank of Centurion! Other-Armor Assembly: In this section, we will summarize observations made by your fellow troopers and our own. Sometimes these observations lead to suggestions to improve the final look of your armor. If any changes are required, they would be listed in the above section. First off, you have done an excellent job with the Blaster. Good balance of weathering and the gloss grip really makes it look like a different blaster from your EIB application, well done. Thank you for jumping straight on to Germain's suggestion of trimming the last of the return edge out of your fore arms, and posting up the new photos. The only thing, we can see that would take your armor another step closer in accuracy would be to find some flat or dome head slotted screws for your Thermal Det. I think you have tapered, or counter sunk type heads on yours. Picky I know, but we thought we better jump on it rather than T5H, also known as (Accuracy Hag) Lol It was a pleasure for us to review this application as it was for your EIB. Once again Congratulations sir 1 Quote
Coastertk Posted January 18, 2016 Report Posted January 18, 2016 Way to go St3ve!!! A major accomplishment for a top shelf mate. I'll meet you on the other side pal. 1 Quote
justjoseph63[Staff] Posted January 18, 2016 Report Posted January 18, 2016 A big congrats and welcome to Centurion, brother! Well deserved!! 1 Quote
Captain_Wordo[TK] Posted January 18, 2016 Report Posted January 18, 2016 Congrats Steve and welcome to the centurion rank! 1 Quote
Stvd201[TK] Posted January 19, 2016 Author Report Posted January 19, 2016 Hey Steve!! Thank you for the chance to see this incredible set of armor, and thank you for your Centurion application. Let's take a look! CRL and Centurion Application Requirements: All required submission photos have been posted. It has been determined that your armor displays all the necessary requirements to qualify for Centurion. Ukswrath and I would like to congratulate you on an outstanding build and welcome you to the rank of Centurion! Other-Armor Assembly: In this section, we will summarize observations made by your fellow troopers and our own. Sometimes these observations lead to suggestions to improve the final look of your armor. If any changes are required, they would be listed in the above section. First off, you have done an excellent job with the Blaster. Good balance of weathering and the gloss grip really makes it look like a different blaster from your EIB application, well done. Thank you for jumping straight on to Germain's suggestion of trimming the last of the return edge out of your fore arms, and posting up the new photos. The only thing, we can see that would take your armor another step closer in accuracy would be to find some flat or dome head slotted screws for your Thermal Det. I think you have tapered, or counter sunk type heads on yours. Picky I know, but we thought we better jump on it rather than T5H, also known as (Accuracy Hag) Lol It was a pleasure for us to review this application as it was for your EIB. Once again Congratulations sir Thanks so much for your positive comments and issuing me the rank of Centurion its definitely a good feeling to know the extra attention to detail was appreciated I am planning to build a new Thermal Det. pretty soon, so I will find some better screws. Those ones are dome heads but have a slight edge underneath as well! Great way to start the week.....Happy Days!! Thanks again! 1 Quote
Stvd201[TK] Posted January 19, 2016 Author Report Posted January 19, 2016 Way to go St3ve!!! A major accomplishment for a top shelf mate. I'll meet you on the other side pal. Thanks brother!! I'm thinking I will be sending you the same congrats pretty soon here Quote
Stvd201[TK] Posted January 19, 2016 Author Report Posted January 19, 2016 Congrats! Congrats Steve and welcome to the centurion rank! Congratulations! A big congrats and welcome to Centurion, brother! Well deserved!! Thanks so much guys! I really do appreciate the welcome into the Centurion ranks. I'm sure you all felt the same pride in aiming for this goal and finally achieving it Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.