Scootch[TK] Posted May 4, 2008 Report Posted May 4, 2008 Hey troops! I know there have been interior decorating threads posted before, I'm interested in learning more about getting the inside of my bucket just right. Spray paint vs. whatever else is going in. Trying to stay away from toxic fumes after the deed is done too. Quote
Imperial Knight Jajj Posted May 4, 2008 Report Posted May 4, 2008 Hey troops! I know there have been interior decorating threads posted before, I'm interested in learning more about getting the inside of my bucket just right. Spray paint vs. whatever else is going in. Trying to stay away from toxic fumes after the deed is done too. im glad you asked this... i have been wondering the same thing... to paint the inside or not? (i hope thats what you are asking... i dont mean to take your thread... ) Quote
Scootch[TK] Posted May 4, 2008 Author Report Posted May 4, 2008 No problemo! Yeah, I'm gonna paint it for sure since it's sure to aid in hiding my face inside, but I wanna find out who's done what and with what type of materials. I was planning to go with Rustoleum or Krylon fusion paint on one bucket. Unless someone has a better idea. Quote
D-MAC Posted May 4, 2008 Report Posted May 4, 2008 The inside of my MR is painted with Plasticoat and then linned with knee pads Quote
Marvinrobot Posted May 4, 2008 Report Posted May 4, 2008 Something to keep in mind original helmets were not painted on the inside so if you have dark enough lenses then you don't have to worry about painting. Though I will say nice jobs like the one above make everyone drooll so if you have the inclination go for it!! Be warned though some of the stuff that folks use to line the helmets requires it to be heated and I know a guy who unfortunately warped his very nice expensive helmet trying to line it too quickly. Quote
Double Dee Posted May 4, 2008 Report Posted May 4, 2008 D-MAC said: The inside of my MR is painted with Plasticoat and then linned with knee pads What brand of knee-pads did you use for the liner? Looks real nice. Quote
Timjim Posted May 4, 2008 Report Posted May 4, 2008 Yeah mines like that too I used spray paint though.. rather fumey.. but left it to air for a while Quote
Runnriottt Posted May 5, 2008 Report Posted May 5, 2008 Those are sweet pads. Link us to them! Great work. I like the finished insides. Yes, the movie ones arent finished, but who wants to hand a kid a clunker to see? You lid and your blaster are the first peices to be handled. Quote
PandaMan Posted May 5, 2008 Report Posted May 5, 2008 I am in the process of making my bucket and I used Krylon Fusion Satin Black. Also, if you look closely, I cut out the vents in the back for a couple of fans and attached industrial velcro for the clips of my head band so I can adjust it accordingly. If I chose not to use ith head band I can just take it out. Hope this helps Brian Quote
mark Posted May 5, 2008 Report Posted May 5, 2008 I am in the process of making my bucket and I used Krylon Fusion Satin Black. Also, if you look closely, I cut out the vents in the back for a couple of fans and attached industrial velcro for the clips of my head band so I can adjust it accordingly. If I chose not to use ith head band I can just take it out. Hope this helps Brian Nice job, but I wonder what that ABS cement will do to that paint... My opinion, you should have assembled the helmet before painting... Has anyone painted the inside before assembly? Quote
D-MAC Posted May 5, 2008 Report Posted May 5, 2008 Those are sweet pads. Link us to them! Great work. I like the finished insides. Yes, the movie ones arent finished, but who wants to hand a kid a clunker to see? You lid and your blaster are the first peices to be handled. http://www.spireworkwear.co.uk/product_inf.../products_id/41 These are the pads that i've used in my Lid. I've glued mine inplace but i know of a guy on the UKG who velcroed (hook n loop) his in place Must be available in the US, if not drop me a pm and i'll see what i can do , i'll be in Florida in June so anyone from the FL Garrison interested just let me know. Quote
Timjim Posted May 5, 2008 Report Posted May 5, 2008 Nice job, but I wonder what that ABS cement will do to that paint... My opinion, you should have assembled the helmet before painting... Has anyone painted the inside before assembly? I know super glue isn't meant to like paint.. but mine stuck just fine, I stuck all the padding in after I sprayed it If not just sand the bits that need sticking then re paint once they're stuck together. Quote
Thumper[TK] Posted May 5, 2008 Report Posted May 5, 2008 Nice job, but I wonder what that ABS cement will do to that paint... My opinion, you should have assembled the helmet before painting... Has anyone painted the inside before assembly? I was worried about the glue/paint issue too so I waited until after assembly which was a bit of a pain. Trying to spray in a small space and not have the stuff go all over or get too thick and run meant some very controlled bursts from the can. I also used plasticoat but I think next time the Krylon Satin black will be sufficient. I've run into a few issues removing velcro pads and the plasticoat comes with it. Next time, I'm thinking of marking a "glue line" after prefitting the pieces together, mask the glue line and then spray. Plastic attaches to plastic and I still have a black interior. Just a thought. Quote
PandaMan Posted May 6, 2008 Report Posted May 6, 2008 Nice job, but I wonder what that ABS cement will do to that paint... My opinion, you should have assembled the helmet before painting... Has anyone painted the inside before assembly? I tested a couple of extra pieces using Devcon's Plastic Welder and it worked just fine. This is what I am using to glue the rest of the armor. In addition to the Plastic Welder, I plan on riviting the bucket at a couple of points. I'll let you know how it goes after I finish it... Quote
TK257[501st] Posted May 7, 2008 Report Posted May 7, 2008 So far, I haven't been able to locate those knee pads here in the states. I've checked all the "big-box" stores and some of the smaller ones. They must be only available in the UK. I haven't even been able to find a reasonable facsimile yet. Quote
firebladejedi[TK] Posted May 7, 2008 Report Posted May 7, 2008 This is the inside of my TE2, basic is an understatement..... Quote
Scootch[TK] Posted May 9, 2008 Author Report Posted May 9, 2008 Well there have been some great posts here! Thanks! My local Hardware store carries Rustoleum products only, so I picked up a can of Satin Black "Universal" advanced formula spray paint. It's got a crazy ergonomic looking trigger instead of the standard issue cap and spray button. But it's supposed to adhere to plastics!!! I will take my helmet bits to work tomorrow and prep them for a good squirting. Directions suggest several light coats within a few minutes of each other followed by a minimum 24 hour cure time. Sounds like all the other Paints I've ever used. Well if anyone wants to stop me you've got about 24 hours from now to do it!!!!! After that it's either laughing at a job well done or laughing at a blow it!!! Quote
firebladejedi[TK] Posted May 9, 2008 Report Posted May 9, 2008 Good luck and be sure to post progress pics Quote
Scootch[TK] Posted May 13, 2008 Author Report Posted May 13, 2008 Okay fellow Imperials.....I finally got some "rushed" moments to do the deed. The new delivery system for the spray paint (trigger) was weird and took some getting used to. Two fat coats were all the job required. I applied them by fogging the stuff on in a back and forth motion side to side.......then back over them a few minutes later up and down. Got good coverage as the paint really wants out of this weird can! I figure once I complete the helmet assembly.....a little sanding and a final coat will make it perf.......but as far as I'm concerned It's there now. I didn't worry too much about the masking job being perfect as I may be painting the exterior as well although I did mask it off quite well. Here's what it looked like a few minutes after the squirting: So I was done around 8:00 pm and will now let this set 72 hours....(Thursday night) before disturbing it again. I'll post a pic of the fully cured finish then =) Thought I'd mention my little armor work table.....4'x4' square piece of 5/8" plywood with some Black indoor outdoor carpet rollled over and stapled on the underside. The Carpet is the very soft kind and won't scratch the work-pieces. I use the un-carpeted side for painting and other messy jobs. For the legs I use plastic adjustable sawhoarses from Home Depot...they look cheap but are actually pretty strong! The whole mess folds up and can be stored in about a 6"wide space. Quote
Scootch[TK] Posted May 15, 2008 Author Report Posted May 15, 2008 Okay....48 hours have lapsed and I'm still smelling a bit of "New paint" smell so had a new color match deal going on. This is my kid's bucket (the AP is his replacement) we painted with Rustoleum "Dark Machine Gray" for the traps, tears, and frown. The decals came with the AP. No matter what type of lighting we use the colors are almost a 100% match, the only defining factor being the paint is a bit more flat than the glossy finish of the decal. It could be because we weathered the bucket pretty thoroughly and thus dulled down the gray paint. Any one else used this paint for their bucket? Quote
Scootch[TK] Posted May 16, 2008 Author Report Posted May 16, 2008 Awright....the 70 some hours have lapsed and so I snagged some pics of the fully cured Interior[attac hment=793:AP_Interior4.jpg]. The Satin Black looks good, I'll more than likely have to clean it up one last time after helmet assembly is done. What do you guys (and gals) think? Quote
mark Posted May 16, 2008 Report Posted May 16, 2008 Awright....the 70 some hours have lapsed and so I snagged some pics of the fully cured Interior[attachment=793:AP_Interior4.jpg]. The Satin Black looks good, I'll more than likely have to clean it up one last time after helmet assembly is done. What do you guys (and gals) think? Looks excellent! Very nice job. Quote
Scootch[TK] Posted May 19, 2008 Author Report Posted May 19, 2008 Thanks Mark! I'll post more updates here soon, my Star Wars fun is being squashed by work <_< Quote
Jester Posted May 21, 2008 Report Posted May 21, 2008 i realy do want to spray the inside of my lid but may have trouble as i'm using a 1 piece fibreglass helm, the oly way that i can think of is to plug the eyes and mouth peice with plastcine and spray or be safe n paint it with a black gloss, or.......... maybe jut line it in some sort of black materail like felt or somthing Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.