Gustavflyer Posted September 22, 2015 Report Posted September 22, 2015 I was reading an ATA build and cheese cloth was added to give a great looking interior and I'm sure s little more strength. I was thinking about using plaster cloth. It's a plaster covered guaze used for model landscaping. I was thinking after its dried just brushing a 50/50 white glue & water over the cloth to seal it then paint it black.... Quote
justjoseph63[Staff] Posted September 22, 2015 Report Posted September 22, 2015 I'm not that familiar with plaster cloth, so I am not sure if it would adhere to the inside of your bucket too well. It also might make it quite a bit heavier than you'd like, depending on how thick you put it on. I know that a lot of people use the brush on black Plasti-Dip and alternate that with layers of cheesecloth for the effect you are looking for.... the advantage being that if you ever need to remove it, it would be MUCH easier than the plaster, and is also flexible. Just my 2 cents worth.. Quote
gmrhodes13[Staff] Posted September 22, 2015 Report Posted September 22, 2015 I'd watch how much weight you are adding, my neck gets sore with a standard bucket Quote
Chills[TK] Posted September 23, 2015 Report Posted September 23, 2015 Yeah, you don't want much weight on your noggin. I did the plasti-dip/cheese cloth combo and it add a bit of weight, just enough to give the helmet a feel of real-ness and not just a plastic prop. AFAIK the cheese cloth doesn't do anything for strength, but it gives the inside a cool texture that looks very similar to the inside of kevlar helmets used by our military. 2 Quote
Knockerbot[501st] Posted September 25, 2015 Report Posted September 25, 2015 Isn't that the stuff they make casts out of? That would be super heavy. My arm still hurts when I think about lugging around my hand cast from last winter I couldn't imagine wanting to add that to my head Sent from my Nexus 5 using Tapatalk Quote
Knockerbot[501st] Posted September 25, 2015 Report Posted September 25, 2015 Plus I don't think it would adhere to the ABS so you'd be chancing it ratting around when you're trooping. Then there's the heat that plaster makes when it dries, does anyone know if it gets hot enough to deform a helmet? It was hot enough to be uncomfortable on my hand I think. It was a bad night so its hard to remember lol Sent from my Nexus 5 using Tapatalk Quote
ComradeDave[TK] Posted September 25, 2015 Report Posted September 25, 2015 I think I'm going to have to agree. I may skip this step and just plasti-dip this inside w/o the cheese cloth. Although the prospect of giving the bucket that extra bit of authenticity might be a good thing. I don't want to kill myself trooping but this may be a good neck workout to add some mass to my pencil neck lol 1 Quote
Gustavflyer Posted September 30, 2015 Author Report Posted September 30, 2015 The more I've read about plasti dip, that's the way I will go...will even skip the cheesecloth too. Thanks for all your inputs!! Quote
justjoseph63[Staff] Posted September 30, 2015 Report Posted September 30, 2015 (edited) I would recommend a couple of things for using the Plasti-Dip... The first one is to sand down the inside and then thoroughly clean it before applying it, so that it will adhere better. I did this, and I have a ton of electronics inside all held on with Velcro and have had no problems. I didn't go with the cheesecloth as I figured I might have some trouble getting Velcro to stick to an uneven surface. The second is be sure to mask off the eyes and teeth really well. Over spray will come off with a bit of effort, though. Lastly, whether you go with the spray or brush on method, go with several thin coats as opposed to one or two heavy ones, and let it dry overnight in between. Edited October 3, 2015 by justjoseph63 1 Quote
Knockerbot[501st] Posted September 30, 2015 Report Posted September 30, 2015 I would recommend a couple of things for using the Plasti-Dip... The first one is to sand down the inside and then thoroughly clean it before applying it, so that it will adhere better. I did this, and I have a ton of electronics inside all held on with Velcro and have had no problems. I didn't go with the cheesecloth as I figured I might have some trouble getting Velcro to stick to an uneven surface. The second is be sure to mask off the eyes and teeth really well. Over spray will come off with a bit of effort, though. Lastly, go with several thin coats as opposed to one or two heavy ones, and let it dry overnight in between. Did you use the spray? I plan on using brush on Sent from my Nexus 5 using Tapatalk Quote
justjoseph63[Staff] Posted September 30, 2015 Report Posted September 30, 2015 I used the spray, but I am sure the brush on will work just dandy. Quote
Chills[TK] Posted October 1, 2015 Report Posted October 1, 2015 Use the brush! It's so much easier to apply and you don't have to worry about overspray. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.