JoblessPunk[TK] Posted August 19, 2015 Report Posted August 19, 2015 (edited) Hey All I have made all requested changes to my armor and ready to submit for Centurion Status. I have marked the updated photos with *NEW* next to the title. Basic Information Name: Tim Magoolaghan LegionID: 31689 Forum Name: JoblessPunk Garrison: Golden Gate Garrison Mandatory Information Armor Maker: AP Helmet Maker: AP Mic Tips: Keith's hovi-mix pa2 cast Blaster Maker: HyperFirm Optional Information: Height: 5'11" Weight: 135 lbs Boots Maker: TK-Boots Canvas Belt: TKittel Hand Plates Type: Karin's Standard Hand Guards Neck seal Type: Veedox Holster Maker: TK Bondservnt 2392 Build Thread: http://www.whitearmor.net/forum/topic/29697-joblesspunk%E2%80%99s-ap-stormtrooper-build/ Photos Full Body Front - Helmet off *NEW* Front - Arms at side *NEW* Left Side - Arms at side *NEW* Left Side - Arm lifted *NEW* Right Side - Arms at side *NEW* Right Side - Arm lifted *NEW* Back - Arms at side *NEW* Armor Details Helmet Helmet - Handpainting close-up Helmet - Green lens Helmet - S-trim Helmet - Mic Tips close-up Torso - Front *NEW* Torso - Back *NEW* Torso - Left Side *NEW* Torso - Right Side *NEW* Torso - Internal strapping *NEW* Abdominal Buttons - Details *NEW* Crotch - Details *NEW* Shoulder bridges - Elastics *NEW* Arms *NEW* Arms - Wrist openings *NEW* Handguards - Flexible Belt - Details Belt - Full inner drop boxes Thermal Detonator - Details Thermal Detonator - Aluminium Clips Thighs - Cover stripes length *NEW* Right Thigh - Ammo belt Shins *NEW* Left shin - Sniper knee plate Shins - Velcro closure *NEW* Boots Action Shot *NEW* Blaster Blaster - Right Side *NEW* Blaster - Left Side *NEW* Blaster - D-ring *NEW* Extra Neckseal, thigh garder, 2 piece undersuit Thank you for reviewing my armor Edited August 19, 2015 by JoblessPunk 3 Quote
Haribon72[TK] Posted August 19, 2015 Report Posted August 19, 2015 AWESOME!!! GOOD LUCK AND WAITING FOR ANOTHER CENTURION FOR THE GARRISON!!! Quote
iceman25c[501st] Posted August 19, 2015 Report Posted August 19, 2015 Wow- beautiful armor and great photography! My only feedback would be to twist your right shin a little. That will help it line up with the thigh better. Quote
The5thHorseman[501st] Posted August 19, 2015 Report Posted August 19, 2015 Beautiful armor and application! Good luck. About the twisting the rigt shin for a better line up with the thigh, it's a bit more complicated. The way the AP right shin is, if you line up the top of the shin's cover stripe with the thigh, then the bottom is off. And if you line the bottom, the top is off. There's no real perfect alignment possible, so don't be too much bugged about that. Quote
justjoseph63[Staff] Posted August 19, 2015 Report Posted August 19, 2015 In a word, Tim,... WOW! Fantastic job, sir, I think you have this one nailed. Incredible job on the paintwork! Quote
starsaber25[Admin] Posted August 19, 2015 Report Posted August 19, 2015 (edited) Wow man...This is unbelievable. You have basically set the bar for how AP should look. This is incredible! Every person who would ever want to go Centurion should see this thread! Edited August 19, 2015 by starsaber25 Quote
BenFriday77[501st] Posted August 19, 2015 Report Posted August 19, 2015 Really really good job. Incredible!! Gesendet von iPhone mit Tapatalk Quote
firebladejedi[TK] Posted August 19, 2015 Report Posted August 19, 2015 Two words spring to my mind while viewing this thread.. Clean and shiny! Quote
PGHtrooper21 Posted August 19, 2015 Report Posted August 19, 2015 WOW, EXCELLENT JOB!!! GREAT PHOTOGRAPHY!!A CLEAN BUILD!!!!! ANDY Quote
JoblessPunk[TK] Posted August 19, 2015 Author Report Posted August 19, 2015 (edited) First off, I'd like to thank all of you for your kind words. A lot of time, research, and sweat went into my armor and I'm quite moved that all you guys like it as much as I do AWESOME!!! GOOD LUCK AND WAITING FOR ANOTHER CENTURION FOR THE GARRISON!!! Thank you! I can't wait to add another Centurion to the GGG! Your armor looks fantastic! Thank you! Wow- beautiful armor and great photography! My only feedback would be to twist your right shin a little. That will help it line up with the thigh better. Thank you! All these photos are taken at my friends house with an iPhone 6 (yeah, crazy huh!). Here's a sneak peak of the set up: Also, thanks for the feedback, the next photoshoot I do I'll try and line the right shin up a bit better. Beautiful photos. Good luck! Thank you! Beautiful armor and application! Good luck. About the twisting the rigt shin for a better line up with the thigh, it's a bit more complicated. The way the AP right shin is, if you line up the top of the shin's cover stripe with the thigh, then the bottom is off. And if you line the bottom, the top is off. There's no real perfect alignment possible, so don't be too much bugged about that. Thank you! Haha, yep, as you know this AP armor is a bit finicky at times. Don't get me wrong, I love the AP armor, but it does have it's quirks In a word, Tim,... WOW! Fantastic job, sir, I think you have this one nailed. Incredible job on the paintwork! Thank you! Wow man...This is unbelievable. You have basically set the bar for how AP should look. This is incredible! Every person who would ever want to go Centurion should see this thread! Thank you! I've seen tons of amazing AP armor builds, but that said I would be honored to be up near the top Really really good job. Incredible!!Gesendet von iPhone mit Tapatalk Thank you! Two words spring to my mind while viewing this thread..Clean and shiny! Thank you! haha, yeah, some like them dirty or scuffed, but I like mine fresh and clean WOW, EXCELLENT JOB!!! GREAT PHOTOGRAPHY!!A CLEAN BUILD!!!!! ANDY Thank you! Edited August 19, 2015 by JoblessPunk Quote
Tusken RTT Posted August 19, 2015 Report Posted August 19, 2015 Awesome job, looks great! That's funny about the Rt. shin being mentioned. We did the Weird Al troop last night and I thought my Rt shin was twisting up on me! I cut the bottom notch down more (around the foot) and added some small velcro to help stop it, but it may have been just me. Quote
bearings[TK] Posted August 19, 2015 Report Posted August 19, 2015 Nice build and wonderful photos! Quote
ukswrath[Staff] Posted August 20, 2015 Report Posted August 20, 2015 Tim, WOW! These are awesome. See you on the other side. Just be advised I may be calling on your photo service for my TFA. 1 Quote
JoblessPunk[TK] Posted August 20, 2015 Author Report Posted August 20, 2015 Awesome job, looks great! That's funny about the Rt. shin being mentioned. We did the Weird Al troop last night and I thought my Rt shin was twisting up on me! I cut the bottom notch down more (around the foot) and added some small velcro to help stop it, but it may have been just me. Thank you! Yeah, I've seen some people use velcro or snaps to hold the right shin in place. After I go on a few troops I'll most likely add something to keep the shin from moving. Nice build and wonderful photos! Thank you! Tim, WOW! These are awesome. See you on the other side. Just be advised I may be calling on your photo service for my TFA. Thanks Tony! I've been following your TFA build and it looks amazing so far! All the photo equipment is my friends, but I bet he wouldn't have any problems taking some photos for you 1 Quote
Nacho[TK] Posted August 20, 2015 Report Posted August 20, 2015 GREAT photos and great build. only thing I may see is the Cap rivet you used on the cod piece is gold/bronze. Correct me if i'm wrong, is it supposed to be silver? CRL doesn't say anything about the color. Great work nonetheless. you got this Quote
starsaber25[Admin] Posted August 21, 2015 Report Posted August 21, 2015 GREAT photos and great build. only thing I may see is the Cap rivet you used on the cod piece is gold/bronze. Correct me if i'm wrong, is it supposed to be silver? CRL doesn't say anything about the color. Great work nonetheless. you got this Mine was bronze and never had a problem. Quote
Nacho[TK] Posted August 21, 2015 Report Posted August 21, 2015 Mine was bronze and never had a problem.Good deal. I stand corrected haha Sent from my SAMSUNG-SM-G900A using Tapatalk Quote
Sly11[Admin] Posted August 21, 2015 Report Posted August 21, 2015 Looks sensational, good luck. Sent from my iPad using Tapatalk Quote
Tr00per Posted August 22, 2015 Report Posted August 22, 2015 Nice looking armor for sure, hoping to get it one day myself .... The blaster looks nice aswell, but the bayonet lug sit's the wrong way around Quote
JoblessPunk[TK] Posted August 26, 2015 Author Report Posted August 26, 2015 nice!! good luck man Thank you! Nice looking armor for sure, hoping to get it one day myself .... The blaster looks nice aswell, but the bayonet lug sit's the wrong way around Thank you! And thanks for blaster suggestion Quote
russellr2d2[TK] Posted August 28, 2015 Report Posted August 28, 2015 A beautiful build. Your photographer makes it all look so beautiful and with an iPhone no less! Your painting skills on the helmet are supernatural. Sent from my iPhone using Tapatalk 1 Quote
gazmosis[501st] Posted August 31, 2015 Report Posted August 31, 2015 Hello, Tim!! I cannot thank the stars enough that I am forced to spend extra looking at everyone's sets of armor. Sometimes a set comes along that steals a breath from me. This was one. Let's have a look! CRL and Centurion Application Requirements: All required photos have been posted and your armor properly displays all required elements to qualify for this badge. With that, I congratulate and welcome you to Centurion!!! Other-Armor Fit/Assembly: It is obvious to me what your intentions were right out of the box. Helmets off to you, Tim! Yes, the photography helps, but it comes down to the details. Your body type allowed you to remove the un-needed cover strip ridge in the thigh backs. Although some may say your helmet details are too perfect, I think the Empire would probably say different. Hyperfirm blasters have atendency to arrive with "enthiusiastic" weathering. I don;t know if you ordered it un-weathered and did it yourself or you altered it, but your blaster looks awesome. I am sure you have been making your Garrison proud already. I would love to be seen beside you. Well done, Tim! 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.