Jump to content

Recommended Posts

Posted (edited)

General Info

  • Name = Stephane Verreault
  • TK Id = 15359
  • FISD name = Somatophylax
  • Garrison = Canadian Garrison
  • Squad = Imperial Fortress
 
Body Type
  • Height = 5’10"
  • Weight = 160lbs
 
Costume
  • Armor = AP
  • Helmet= AP
  • Blaster= Blastech E-11 (from AP)
  • Boots = Imperial Boots
  • Canvas belt = TKittell
  • Hand Plates = ANH Stunt latex, painted white
  • Electronics= Aker + iComm combo
  • Neck Seal = Darman’s (zip enclosure)
  • Holster = AP
 
EIB Request thread
 
Front - Arms at side
01.%20Front%20-%20arms%20at%20side%20v2_
 
Back - Arms at side
As recommended form my EIB application, I have reduced the straps between the back and kidney plates to shrink the gap. Although I’m not sure here if one of them snapped off or if I just did not stand straight enough for the pic.
02.%20Back%20-%20Arms%20at%20side%20v2_z
 
Left - Arm raised
As recommended form my EIB application, I have reduced the straps between the ab and kidney plates to shrink the gap.
03.%20Left%20-%20Arm%20raised%20v2_zpsha
 
Right - Arm raised
As recommended form my EIB application, I have reduced the straps between the ab and kidney plates to shrink the gap.
04.%20Right%20-%20Arm%20raised%20v2_zpsj
 
Ab/Kidney Attachment - Button Orientation
34.%20Ab%20attachment_zpsv50qjujr.jpg
 
Hand Plates (latex, painted white)
11.%20Hand%20guard_zps4md60d1d.jpg
 
Shoulder Bridge - Front
12.%20Shoulder%20bridges%20Front_zpsmrgk
 
Shoulder Bridge - Back
13.%20Shoulder%20bridges%20Back_zps3qvlo
 
Back/Chest Connection
27.%20Back-Chest%20Connection_zps4kdc5od
 
Thigh Pack Attachment (double-capped rivets, painted white)
14.%20Thigh%20pack%20attachment_zps5vblh
 
Knee Plate
25.%20Sniper%20Knee%20Plate_zpst0r2pqrx.
25.%20Sniper%20Knee%20Plate%20-%20Left_z
25.%20Sniper%20Knee%20Plate%20-%20Right_
 
Dropbox - Back
29.%20Dropbox%20-%20Back_zps62fwlwko.jpg
 
Cod and butt plate attachment
09.%20Cod%20and%20butt%20plate%20attachm
 
Interior strapping
10.%20Interior%20strapping%201_zpskcqpwr
10.%20Interior%20strapping%202_zpsue57cs
 
Kidney Plate Notch
33.%20Kidney%20notch_zpsn2bzymze.jpg
 
Wrist side of forearms
32.%20Wrist%20side%20of%20forearm_zpsjtv
 
Helmet - Front
16.%20Helmet%20-%20Front_zpsd9gw7ndy.jpg
 
Helmet - Sides
18.%20Helmet%20-%20Left_zps0s4gslx7.jpg
19.%20Helmet%20-%20Right_zpst2ruv9hs.jpg
 
Helmet - Back
17.%20Helmet%20-%20Back_zpsfwpktm9w.jpg
 
Helmet - Lens color
20.%20Helmet%20-%20Lense%20color_zpsbr0f
 
Helmet - Hovi Mic Tip Detail
Helmet%20-%20Hovi%20top%20detail_zpskg6l
 
Helmet - S-trim (this is the piece I cut off when I installed it… I preferred not to remove it for the pic)
15.%20S-trim_zps1ntqmy7r.jpg
 
Blaster - Left
21.%20Blaster%20detail%20-%20Left_zpsb42
 
Blaster - Right
22.%20Blaster%20detail%20-%20Right_zpso9
 
Neck seal
26.%20Neck%20seal_zpsfvcgyo3z.jpg
 
Thermal detonator
24.%20Thermal%20detonator%20-%20Back_zps
 
Holster attachment and ammo belt
28.%20Holster%20attachment%20-%20Back_zp
28.%20Holster%20attachment%20-%20Front_z
30.%20Full%20belt%20assembly_zpsuzgxparq

 

I thank you for your time in checking out my application.

 

Cheers!

Edited by Somatophylax
Posted

Great looking armor!  You may want to take the return edge off the forearm in the area with the dimples.  

Posted

Hey Stephane! I know about the suspense. I was on a family vacation this weekend and not at my "station" as I like to call it.

Anyway, thank you for your Centurion application. Complete and thorough. Thank you. Let's look at everything!

 

CRL and Centurion Application Requirements:

It was noted in the EIB application the excessive gaps between the back and kidney plates as well as both side seams needed to be addressed. Although the back gap was not eliminated, I do consider this gap to be minimal and acceptable. The side gaps have been sufficiently addressed.  All other aspect of your armor meet the requirements to qualify for Centurion. That said, I would like to congratulate you on earning your Centurion badge!

 

Other-Armor Fit/Assembly:

Usually, there isn't too much to go over here except to summarize any observations I or your fellow troopers might have. Not too much going on here! Great overall work! Very nice!!

 

I noticed that you got your blaster from the same guy Spycee did, Your rear sight is on backwards as well. The serrated edges should face the rear of the blaster. I did notify Mark from AP to let his guy know. Hopefully his next round will be facing the right way. 

I will usually make a "put a gun to my head" comment as well. If there was one thing I'd like to see you do at sometime in the future is to re-paint the tear areas under your eyes. As they are, they hold the shape and detail typically seen and that is fine. They are a bit small, though. On any helmet, there is a valley between the walls of the tears and the bottom of this recessed area. Using a pencil, the shape will just appear by itself as a pencil guides its way in this valley. I highlighted the area I am referring to. This is just so you can see but your pencil will show you the REAL lines.post-12041-0-29545100-1437452608_thumb.jpg

 

Great job again.Your Garrison should be proud to troop beside you!!!

 

Posted

Congratulations Stephane! Your hard work has paid off!

  • Like 1
Posted

Congratulations Stephane, and welcome to the Centurion ranks.

 

 

Sent from my iPad using Tapatalk

  • Like 1
Posted

Thanks. It went so fast! I only got accepted in the Legion last Tuesday and i'm already level 3. This is awesome :)

 

 

Stéphane

Posted

Congratulations. I aim for an equally meteoric rise very soon!

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...