Sano[TK] Posted June 24, 2015 Report Posted June 24, 2015 Hey mates I finally got the first two boxes with the armor parts and the gaskets. Due to I have experience in building Clone Armors, I think the general build will be mostly the same but of course I will need your helmet with the Stormtrooper specific parts like the AB Plates with its boxes etc. I will start trimming the armor and replace the slot of the Chest Armor with the Resin Detail slot. Cheers Dino // CT-75608 2 Quote
Barcoder[TK] Posted June 24, 2015 Report Posted June 24, 2015 Congrats on being the first in Germany! Ask lots of questions & have fun with your build. Looking forward to your progress! Quote
Sano[TK] Posted June 24, 2015 Author Report Posted June 24, 2015 Well I am not the first one who got it, I am just the first german with a WIP There are actually a lot germans who got their First Order TK's Quote
Barcoder[TK] Posted June 24, 2015 Report Posted June 24, 2015 Well I am not the first one who got it, I am just the first german with a WIP There are actually a lot germans who got their First Order TK's Well, congrats on being the one to start a build thread! Quote
Sano[TK] Posted June 24, 2015 Author Report Posted June 24, 2015 First question: I see there are already glue straps vac formed to the armor parts. I hope you know what I mean. But I cant find the glue strap on the long side of the bicep armor, there is just a glue strap on the small side. :S Quote
Barcoder[TK] Posted June 24, 2015 Report Posted June 24, 2015 First question: I see there are already glue straps vac formed to the armor parts. I hope you know what I mean. But I cant find the glue strap on the long side of the bicep armor, there is just a glue strap on the small side. :S Yea, there is only the one glue tab. The long side, as you said, will be a butt joint and need to be seamless. You need to use a backing strip, & I'd suggest making it a little wider than the template provided. Quote
Sano[TK] Posted June 24, 2015 Author Report Posted June 24, 2015 Next question: I trimmed the calfs and my question is how to I take on the armor? I mean when I glue both sides I will not be able to put it on. Clone Troopers simply use the spoon technique. How do you guys made it? Velcro on one side? But then there will be a visible gap. Is that screen accurate? Quote
Barcoder[TK] Posted June 24, 2015 Report Posted June 24, 2015 Next question: I trimmed the calfs and my question is how to I take on the armor? I mean when I glue both sides I will not be able to put it on. Clone Troopers simply use the spoon technique. How do you guys made it? Velcro on one side? But then there will be a visible gap. Is that screen accurate? Yes, only one side of the calves is glued. The inside seam is where you use Velcro on the tab. The outer seam will face the back, so it's not noticeable. Same kinda deal with the original TK armour. Tip-Be sure to keep the pdf instructions right in front of you the whole time... I often referenced them 3-6 times before gluing/cutting....and then checked these threads/pictures to double-check again. lol (I was very nervous about messing up, which I still ended up doing just recently.) Quote
Barcoder[TK] Posted June 24, 2015 Report Posted June 24, 2015 I wonder if the traditional Hook method for closing the calves would also be a good option for this kit? The gap may be smaller compared to the Velcro, but a gap would be still inevitable. Quote
Cody42[TK] Posted June 24, 2015 Report Posted June 24, 2015 (edited) At least the armors shown at celebration had a very visible seam on the inside of the upper and lower leg. See for example this picture: http://www.originalprop.com/blog/wp-content/uploads/2015/04/Star-Wars-Celebration-The-Force-Awakens-Props-Costumes-Exhibit-Characters-Models-042.jpg It is also visible in the first teaser trailer (look at the legs of the troopers on the right in the shot where the legs of the troopers are visible). In that scene you can look into that seam, there is no velcro visible. So if you use velcro it should be well hidden. Edited June 24, 2015 by Cody42 Quote
Barcoder[TK] Posted June 24, 2015 Report Posted June 24, 2015 At least the armors shown at celebration had a very visible seam on the inside of the upper and lower leg. See for example this picture: http://www.originalprop.com/blog/wp-content/uploads/2015/04/Star-Wars-Celebration-The-Force-Awakens-Props-Costumes-Exhibit-Characters-Models-042.jpg Yes, I noticed that as well. Which is odd because the thighs are very roomy and go on super easy when glued on both sides. (Maybe it was just for display purposes...) Quote
Cody42[TK] Posted June 24, 2015 Report Posted June 24, 2015 Yes, I noticed that as well. Which is odd because the thighs are very roomy and go on super easy when glued on both sides. (Maybe it was just for display purposes...) True, might have been just for display. That's why I looked into the trailer again. I managed to dig up a still frame. This image shows the opening or at least a gap suggesting an opening: http://cdn.collider.com/wp-content/uploads/Screen-Shot-2014-11-28-at-8.24.38-AM.png Quote
gmrhodes13[Staff] Posted June 24, 2015 Report Posted June 24, 2015 Looking forward to the progress Quote
Zaphod[TK] Posted June 25, 2015 Report Posted June 25, 2015 Yes, only one side of the calves is glued. The inside seam is where you use Velcro on the tab. The outer seam will face the back, so it's not noticeable. Same kinda deal with the original TK armour. Tip-Be sure to keep the pdf instructions right in front of you the whole time... I often referenced them 3-6 times before gluing/cutting....and then checked these threads/pictures to double-check again. lol (I was very nervous about messing up, which I still ended up doing just recently.) What are these "PDF Instructions" you speak of, and where does one get a hold of them? My boxes, #1 & #2, had no pdf instructions. Quote
Paggeldiwwer[TK] Posted June 26, 2015 Report Posted June 26, 2015 What are these "PDF Instructions" you speak of, and where does one get a hold of them? My boxes, #1 & #2, had no pdf instructions. That's my first question too. I recieved my first two boxes yesterday. One contained the ABS-Parts, the Stickers and the checklist, the other one the gaskets. Is it true, that the belt, the neckseal and the soft-pouche will come in separatly? That would make four boxes total - if I add the belt-parts, the helmet and the two other ones together. Does one know about that??? Quote
Cody42[TK] Posted June 26, 2015 Report Posted June 26, 2015 That's my first question too. I recieved my first two boxes yesterday. One contained the ABS-Parts, the Stickers and the checklist, the other one the gaskets. Is it true, that the belt, the neckseal and the soft-pouche will come in separatly? That would make four boxes total - if I add the belt-parts, the helmet and the two other ones together. Does one know about that??? Yes, it is four boxes in total. #3 & #4 should contain the helmet and the soft-good parts (gloves, belt, pouches, neckseal) Quote
ukswrath[Staff] Posted June 29, 2015 Report Posted June 29, 2015 Welcome Dino, another TFA sweet! Quote
Sano[TK] Posted July 1, 2015 Author Report Posted July 1, 2015 Ok guys. My armor is nearly built. I modded the AB / Kidney Plate because I want this part to be closed. I know it is not necessary but I like it closed. :-D Here are the pics: :-) Quote
Sano[TK] Posted July 10, 2015 Author Report Posted July 10, 2015 Arms and legs are done! :-) :-) Quote
Barcoder[TK] Posted July 13, 2015 Report Posted July 13, 2015 Looking good Dino! You might just beat me to the finish line. lol Quote
Sano[TK] Posted July 27, 2015 Author Report Posted July 27, 2015 Built nearly done! The boxes are fixed with screws. :-) Back Armor Detonator: Chestplate with Greeblies The full set! Just the spats, the belt boxes and the strapping are missing. When the helmet arrives I can start painting! :-) Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.