justjoseph63[Staff] Posted June 21, 2015 Report Posted June 21, 2015 (edited) Name: Joseph Pedigo Forum name: justjoseph63 Garrison: Florida (Makaze squad) ID: TK 10963 Armor: AM 2.0 / ATA * Helmet: AM 2.0 Blaster: Doopydoos full resin mod Ht: 5' 10 Wt: 155 Boots: Imperial boots Canvas belt: Imperial issue Hand plates: Home-made latex Neck seal: Darman Holster: Gazmosis * AM 2.0 chest plate, back plate, ab, and kidney were replaced with ATA. Kidney and ab were replaced due to rivets being in the wrong position, and back was replaced as it would not fit with new ATA kidney. TD plate (too narrow) was replaced with wider TM plate. Also, my apologies for the lame "action shot". Thank you for your consideration. Side note: I noticed my bicep elastic is too high, and keeps slipping upward. I will remedy that today Update: DONE, (pic added in last post). TD screws updated to flat head (see photo in 2nd post). Edited June 25, 2015 by justjoseph63 Quote
Tusken RTT Posted June 21, 2015 Report Posted June 21, 2015 Only thing I see that really stands out is you spelled 'left' wrong. Awesome job! Folks might recommend swapping your screws out on the TD to slotted, but not required. Good luck! 1 Quote
justjoseph63[Staff] Posted June 21, 2015 Author Report Posted June 21, 2015 Good eye, and thanks, Scott! Screws have been replaced and painted. Unfortunately, Photobucket will not let me change the spelling now that it's done, so there is nothing lest to do but leave it as it is. Quote
ukswrath[Staff] Posted June 22, 2015 Report Posted June 22, 2015 You go Joseph whoo hoo! good luck sir Quote
justjoseph63[Staff] Posted June 25, 2015 Author Report Posted June 25, 2015 Here is the updated photo you requested, and THANKS!!!!! (You were right, 30 seconds)! Quote
justjoseph63[Staff] Posted June 25, 2015 Author Report Posted June 25, 2015 Bicep straps lowered For some strange reason in the photo it looks uneven, but is actually not.. Quote
KellwolfB6[501st] Posted June 26, 2015 Report Posted June 26, 2015 Nice job. You do realize I'm gonna be leaning on you heavily when I start working on mine. Quote
justjoseph63[Staff] Posted June 26, 2015 Author Report Posted June 26, 2015 Thanks, Steven! Anything I can do to help you out, just let me know! What armor did you go with? Quote
gazmosis[501st] Posted June 27, 2015 Report Posted June 27, 2015 Alright Joseph! Your jorney has finally arrived! Thank you for your Centurion application and let's get to it!!! CRL and Centurion Application Requirements: All the required submission photos have been posted. Your armor now contains all necessary details to obtain Centurion. Congratulations and welcome!!! Other-Armor Fit/Assembly: With your arrival at Centurion, there isn't much to add in this section. I would like to add for those following along that the original shot near the top of the wrist openings of Joseph's forearms showed remaining return edge within the opening at the square intent ridge. ALL return edge within the opening is required to be removed which Joe has done. It is also important to note that Joe's original costume was the AM chest which has been replaced with a more accurate version and it was WELL worth it!! I like the improvements done to your Thermal Detonator as well in the overall length and the new screw hardware. If there was one other thing I would look into, it would be the correct screw hardware for the front of your scope. "X" head screws were never seen here as in this scope example Well done and congrats overall!!! 1 Quote
justjoseph63[Staff] Posted June 27, 2015 Author Report Posted June 27, 2015 (edited) Thank you SO much, Steve! You have gone above and beyond the call of duty on this one with all the help and answers to all my odd questions. I will get those scope screws taken care of this afternoon... Next up, HWT Centurion! Edited June 27, 2015 by justjoseph63 Quote
ukswrath[Staff] Posted June 27, 2015 Report Posted June 27, 2015 YEAH! Joseph great job and welcome to the ranks sir 1 Quote
justjoseph63[Staff] Posted June 27, 2015 Author Report Posted June 27, 2015 Thanks, Tony, and I appreciate your help in getting here! (Nice pics, eh)? Installing your hovi-tip mic system tomorrow... can't wait! Quote
KellwolfB6[501st] Posted June 29, 2015 Report Posted June 29, 2015 Thanks, Steven! Anything I can do to help you out, just let me know! What armor did you go with? Congrats!! I'm ordering the AM 2.0 next month. Still kicking around the idea of a different helmet, though. I figure I'll do the AM chest and back at first for basic approval, and I'll get a more accurate replacement down the road. 1 Quote
SeanTX Posted July 18, 2015 Report Posted July 18, 2015 On the bottom screw on your left ear you have the washer under the screw head. Is that correct? Quote
justjoseph63[Staff] Posted July 18, 2015 Author Report Posted July 18, 2015 No, but it certainly does look like it! What that is, Sean, is a small indentation that AM builds into the ear guard to assist you in the correct screw placement. Mine happened to be off by about 1/32 of an inch, and is casting a small shadow. Quote
justjoseph63[Staff] Posted July 18, 2015 Author Report Posted July 18, 2015 ç§ã¯ã‚ãªãŸãŒãれを好ã幸ã›ã§ã™ã€éžå¸¸ã«ã€ã‚ã‚ŠãŒã¨ã†ã”ã–ã„ã¾ã™ï¼ Quote
SeanTX Posted July 21, 2015 Report Posted July 21, 2015 Ah cool. My two AM 2.0 kits were off as well and I just finished wrestling with them. I just drilled new holes in the helmet halves rather than the ear. Thanks for showing us what a right AM kit looks like. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.