YESSRAM[TK] Posted June 6, 2015 Report Posted June 6, 2015 (edited) Name: Yessid RamÃrez RomeroTK ID: 99988FISD Name: YessRamGarrison: Outpost PerúBody Type: Height = 1.73 metres Weight = 89 kgs Costume: Armor = ATA Helmet = ATA Blaster = Doopy Doos with Red Laser Class III. Boots = TK Boots- Canvas belt = Trooperbay. Hand Plates = ATA (ABS) / Trooperbay (Silicon Ellastic). Electronics = iComm Imperial Communication System - Aker MR1506 - Red Laser Class III. Neck Seal = Darman´s.(Zip Enclosure) Holster = Trooperbay. EIB Thread: http://www.whitearmor.net/forum/topic/31351-tk-99988-requesting-anh-stunt-eib-status-ata465/Thank you for looking at my application to Centurion Level, here I go!!FRONT:BACK:LEFT SIDE:RIGHT SIDE:AB DETAILS:COD DETAIL:BUT PLATE DETAIL:RIGHT SHOULDER BRIDGE DETAIL:LEFT SHOULDER BRIDGE DETAIL:THIGH AMMO PACK DETAIL:KNEE PLATE DETAIL:DROP BOX DETAIL W/SIDE PROFILE:BELT AND HOLSTER DETAIL:INTERIOR STRAPPING W/SHOULDER STRAP DETAIL:RIGHT KIDNEY NOTCH DETAIL:RIGHT KIDNEY NOTCH DETAIL:WRIST RETURN EDGES RIGHT & LEFT NECK SEAL:GLOVE DETAILS:THERMAL DETONATOR DETAIL:BLASTER RIGHT, LEFT AND D-RING DETAILHELMET DETAIL FRONT AND LEFT SIDEhttp://i304.photobucket.com/albums/nn197/yesidram/FOTOS%20CENTURION%20APP/SAM_1621_zpswmcqe4hv.jpg" border="0" alt=" photo SAM_1621_zpswmcqe4hv.jpg"/></a>HELMET RIGHT DETAIL:HELMET HOVI TIP DETAIL:HELMET BACK:LENS COLOR:S-TRIM:I appreciate your time to check my pictures so I'll be waiting your important comments about It. God bless you and Long Live To Empire!!! Edited June 7, 2015 by YESSRAM Quote
captsafe66[Admin] Posted June 7, 2015 Report Posted June 7, 2015 Looks great!! Good Luck Trooper!! Please stand by, Steve is at their big Library Troop Today. 1 Quote
Crusader_6[TK] Posted June 7, 2015 Report Posted June 7, 2015 Yess, It looks great!! My best wishes to you!! Troop with pride, my friend!! Quote
YESSRAM[TK] Posted June 7, 2015 Author Report Posted June 7, 2015 Looks great!! Good Luck Trooper!! Please stand by, Steve is at their big Library Troop Today. Hi Mark, Thank you for your comments... Big Hug Bro!!! Quote
YESSRAM[TK] Posted June 7, 2015 Author Report Posted June 7, 2015 Yess, It looks great!! My best wishes to you!! Troop with pride, my friend!! Hello My Friend... Thanks for your comments!!! I'll Be Waiting for you in this side!! Good Day Bro!!! Quote
Pencap510 Posted June 7, 2015 Report Posted June 7, 2015 Great looking build, I really like the hand painted detail on the helmet. The only two things that stand out to me are the length from your drop boxes, to your belt ( could be shortened up to a man in minimal distance ) and your screws on your TD should be flat head- not Philips head. Good luck !! Ty 1 Quote
YESSRAM[TK] Posted June 7, 2015 Author Report Posted June 7, 2015 (edited) Great looking build, I really like the hand painted detail on the helmet. The only two things that stand out to me are the length from your drop boxes, to your belt ( could be shortened up to a man in minimal distance ) and your screws on your TD should be flat head- not Philips head. Good luck !! Ty Hello Ty: Thanks for your comments and suggestions, those were fixed (drop boxes) and changed (flat head screws) DROP BOXES: THERMAL DETONATOR (SCREWS) Thanks Ty Edited June 7, 2015 by YESSRAM 1 Quote
Paggeldiwwer[TK] Posted June 9, 2015 Report Posted June 9, 2015 A great looking armor. Really a nice job you have done on that. And the speed of updating the dropboxes and TD-screws was awesome. That's what I call "Imperial Dicipline" Good luck!!! 1 Quote
Tusken RTT Posted June 9, 2015 Report Posted June 9, 2015 Looking good! The pics of the kidney notch's may be zoomed in too much- are they indeed notched out? 1 Quote
YESSRAM[TK] Posted June 9, 2015 Author Report Posted June 9, 2015 A great looking armor. Really a nice job you have done on that. And the speed of updating the dropboxes and TD-screws was awesome. That's what I call "Imperial Dicipline" Good luck!!! Hi, Marc: Thank you for your comments... Big Hug Brother!! Quote
YESSRAM[TK] Posted June 9, 2015 Author Report Posted June 9, 2015 (edited) Looking good! The pics of the kidney notch's may be zoomed in too much- are they indeed notched out? Hello Scott: Well, the Centurion suggestions on my EIB says that I should to close the AB plate and Kidney. SO I closed these pieces with 6.5cms on both sides and I worked with this model that was sent me by Steve. http://www.whitearmor.net/forum/uploads/monthly_05_2015/post-12041-0-37652000-1431470669.png and I took some pictures about the process. Actually, when I fit my armour these parts close perfectly... because I used the heat gun to spent the ends and close the kidney plate more than normal. But when I add these pieces of plastic they showed a line of union. They were secretly covered with tape and then painted in white color. And this is the result... About your question Scott, the indeed notched are in. Thank you for your time and your comments about my app. Big Hug Bro!!! And have a good day Edited June 9, 2015 by YESSRAM Quote
gazmosis[501st] Posted June 9, 2015 Report Posted June 9, 2015 Hey there, Yessid! Thank you Very much for your application for Centurion. Let's look at your armor!! CRL and Centurion Application Requirements: All required submission photos have been posted. Thank you very much for all the upgrades you have done so far. There are a couple things that I would like you adjust that when done, will make a huge difference in the overall appearance of your armor. Forst, two things directly related to CRL requirements are the Kidney notch which I have circled on this screen used suit: This needs to be integrated into the kidney on both sides. The second thing is the overlap of your back onto the kidney. This goes beyond what I would consider minimal as stated in the CRL. Sometimes this is caused/solved with a snap adjustment at the shoulder bridge. But I noticed in your case that it might be caused at the back/kidney connection. Your straps connecting the two seem short causing the overlap before even wearing it.The topof the kidney and bottom of the back should rest directly against each other creating a single seam with minimal to no overlap. There are instances where I mention something that I would like to see corrected that is not necessarily on the CRL but differs too far from the original suits. The first thing is an easy adjustment and that is to eliminate the gaps you have between the shoulder bells and the shoulder bridges. There really should be no gap in this area and by a simple snap re-location on the shoulder strap itself will solve this. The second thing is you waist belt. The top of your belt assembly should be resting against or slightly overlapping the bottom edge of the button plates. The belt as you have it is causing a sag both in the front and the back. It is actually sagging MORE in your Centurion photo than in your EIB pic. Note the circled area I am referring to. As I mentioned in your EIB application, moving the snaps on your ab up a bit will sole the low belt position AND will probably cover up the lower rivet on the left side which should NOT be showing. Other-Armor Fit/Assembly: The little things you have done to this point have made a big difference including re-sizing your biceps, new thermal detonator clip screws, re-sizing your elastic on your drop boxes, and your side shims. I am sure with your talents, These small fixes will be no problem for you. 1 Quote
Tusken RTT Posted June 9, 2015 Report Posted June 9, 2015 (edited) About your question Scott, the indeed notched are in. Thank you for your time and your comments about my app. Big Hug Bro!!! And have a good day I must be missing the notches! Edited June 9, 2015 by Tusken RTT Quote
YESSRAM[TK] Posted June 9, 2015 Author Report Posted June 9, 2015 Hey there, Yessid! Thank you Very much for your application for Centurion. Let's look at your armor!! CRL and Centurion Application Requirements: All required submission photos have been posted. Thank you very much for all the upgrades you have done so far. There are a couple things that I would like you adjust that when done, will make a huge difference in the overall appearance of your armor. Forst, two things directly related to CRL requirements are the Kidney notch which I have circled on this screen used suit:gallery_12157_16_5981 - Copy.jpg This needs to be integrated into the kidney on both sides. The second thing is the overlap of your back onto the kidney. This goes beyond what I would consider minimal as stated in the CRL. Sometimes this is caused/solved with a snap adjustment at the shoulder bridge. But I noticed in your case that it might be caused at the back/kidney connection. Your straps connecting the two seem short causing the overlap before even wearing it.The topof the kidney and bottom of the back should rest directly against each other creating a single seam with minimal to no overlap. There are instances where I mention something that I would like to see corrected that is not necessarily on the CRL but differs too far from the original suits. The first thing is an easy adjustment and that is to eliminate the gaps you have between the shoulder bells and the shoulder bridges. There really should be no gap in this area and by a simple snap re-location on the shoulder strap itself will solve this. The second thing is you waist belt. The top of your belt assembly should be resting against or slightly overlapping the bottom edge of the button plates. The belt as you have it is causing a sag both in the front and the back. It is actually sagging MORE in your Centurion photo than in your EIB pic. Note the circled area I am referring to.post-20574-0-84322000-1431320594_thumb1.jpg As I mentioned in your EIB application, moving the snaps on your ab up a bit will sole the low belt position AND will probably cover up the lower rivet on the left side which should NOT be showing. Other-Armor Fit/Assembly: The little things you have done to this point have made a big difference including re-sizing your biceps, new thermal detonator clip screws, re-sizing your elastic on your drop boxes, and your side shims. I am sure with your talents, These small fixes will be no problem for you. Hello Steve: I'll be working on the new requeriments... so I'll post these pics as soon as possible. Thank you for your time to check my app... 1 Quote
Chewie Jones[TK] Posted June 9, 2015 Report Posted June 9, 2015 Creat Job !!! Congratulations , my brother !!! Good luck in this apli ation !!! 1 Quote
YESSRAM[TK] Posted June 10, 2015 Author Report Posted June 10, 2015 I must be missing the notches! Hi Scott: Sorry for my last answers, now I'm understand about the notches, tomorrow I'll post the new pictures with the last requeriments!!! Thanks for your comments!!! Quote
ukswrath[Staff] Posted June 10, 2015 Report Posted June 10, 2015 Hey YessRam looking good sir, almost there brother. 1 Quote
Crusader_6[TK] Posted June 10, 2015 Report Posted June 10, 2015 Yessid!!! Ya mismo !! Jaja Sent from my iPhone using Tapatalk 1 Quote
YESSRAM[TK] Posted June 10, 2015 Author Report Posted June 10, 2015 (edited) Dear Brothers: Finally, today is the big day hehehehehe Let's go again... I made new pieces of nylon and snaps... They have 1.5cms more than the old snaps!! And The Result... More Space between the plates... Now... The Kidney Notches!!! The Process!! Measures: 30mm x 40mm And The Result... Well, Thanks to EVERYBODY for your comments and support to me, I enjoyed everythings about the complete process since my adoption of the 501st Legion to this end point with Centurion process. I love you Brothers!! Thanks for your BIG Patience with me hehehehe Edited June 11, 2015 by YESSRAM Quote
Tusken RTT Posted June 11, 2015 Report Posted June 11, 2015 Now we have the notches! What size reference did you use? 22mm x 22mm usually- these can vary a bit but yours appear a bit larger. Quote
YESSRAM[TK] Posted June 11, 2015 Author Report Posted June 11, 2015 (edited) Now we have the notches! What size reference did you use? 22mm x 22mm usually- these can vary a bit but yours appear a bit larger. Hello Scott: Thanks for your comment, the measures used there 30mm x 40mm because I added to the kidney plate 65mm of ABS more, so I considered these measures proportionals to the complete kidney Have a good day Bro... Edited June 11, 2015 by YESSRAM Quote
ivanovo[TK] Posted June 11, 2015 Report Posted June 11, 2015 ¡Impresionado por el finÃsimo trabajo que has realizado, Yessid! ¡Felicitaciones! 1 Quote
YESSRAM[TK] Posted June 11, 2015 Author Report Posted June 11, 2015 ¡Impresionado por el finÃsimo trabajo que has realizado, Yessid! ¡Felicitaciones! Hola Manolin: Muchas gracias hermanito por tus palabras.... Estamos haciendo lo mejor para dejsr en alto el Outpost de Perú y por supuesto de Latinoamérica. Fuerte abrazo y esperemos que esta semana ya tengamos el famoso titulo!! 1 Quote
gazmosis[501st] Posted June 12, 2015 Report Posted June 12, 2015 The Kidney notch is a bit tall but not too bad. Keep going with the shoulder and belt adjustment, suit back up so we can see everything together and how your back and kidney look re-adjusted. Can't wait to see it!! 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.