The5thHorseman[501st] Posted April 19, 2015 Report Posted April 19, 2015 Those are really amazing! Such a brilliant work. Good luck on your hunt for the correct screws! 1 Quote
Verne Posted April 22, 2015 Report Posted April 22, 2015 Received my sets from Vaj...just an outstanding work!!! Clean, precise, strong mic tips. Very very impressive. I recommand them, those are really accurate! 1 Quote
Vaj Posted April 23, 2015 Author Report Posted April 23, 2015 Received my sets from Vaj...just an outstanding work!!! Clean, precise, strong mic tips. Very very impressive. I recommand them, those are really accurate! Thank you Fabien Quote
Bulldog44[TK] Posted April 23, 2015 Report Posted April 23, 2015 Do you have a sales thread for these yet? If not, how much would one set cost? Amazing job on these! Quote
usaeatt2 Posted April 23, 2015 Report Posted April 23, 2015 Hey Vaj, I'm still looking to win a second set of Hovi's with my order... . I stopped by Grainger and ordered the screws mentioned earlier in this thread (none of the stores have them in stock - special order). When they come in, I'll post a picture. If they're not the correct screws, they'll go into my shop stock, so no loss. Grainger says they will arrive in a few days, so cross your fingers! Quote
Vaj Posted April 23, 2015 Author Report Posted April 23, 2015 Do you have a sales thread for these yet? If not, how much would one set cost? Amazing job on these! No not yet! I will make a sale thread when I decided which screws/bolts will come with the mic tips. I have some sets ready to ship and the screws with nuts and washers are very close. I just wait a little bit to see if I can find them even closer! For prices please drop me pm! Hey Vaj, I'm still looking to win a second set of Hovi's with my order... . I stopped by Grainger and ordered the screws mentioned earlier in this thread (none of the stores have them in stock - special order). When they come in, I'll post a picture. If they're not the correct screws, they'll go into my shop stock, so no loss. Grainger says they will arrive in a few days, so cross your fingers! Very cool Aaron! It looks like I found them already but there are no square nuts that will fit this screw thread! Therefore I need to make a compromise soon or maybe I stay with the screws I had from the beginning. I can't wait to see the graingers screws! Quote
Vaj Posted May 7, 2015 Author Report Posted May 7, 2015 I have eight sets for sale and made a sale thread for everyone who might be interested: http://www.whitearmor.net/forum/topic/31288-vajs-accurate-3d-printed-three-part-mic-tips-hovi-mix-pa2/ Quote
Vaj Posted May 28, 2015 Author Report Posted May 28, 2015 A little update on this! I decided to change the bolts to bigger ones as its easier for assembling and it fits just better. This is how the Hovi's look finished to my personal preference and attached to a helmet. The trick is you can attach the bolts with the base of the mic tip to the helmet and can screw the mainbody with the nipple after then! While the exchangerate from Euro to Dollar makes it an unfair price for you US guys I will drop the price to 25$ US-International and 25€ within Europe including shipping for both. I will update this in the sales section! I think this price drop will please the hardliners as well as the people who think mic tips are only a luxury item. Since the price has changed now I will give 10% discount to the customers who already bought some of my Hovi's on their next order! Thank you guys 1 Quote
AJCG Posted May 29, 2015 Report Posted May 29, 2015 Absolutely stunning Marcus! You made it, I know how much effort you have put into this. Congrats buddy. Well I am gong to need to update my Hovi's Cheers A 1 Quote
Fumanchewie[TK] Posted May 30, 2015 Report Posted May 30, 2015 Much of the 3D printed work out there does not look this good. Stunning work! 1 Quote
Vaj Posted September 19, 2015 Author Report Posted September 19, 2015 One more quick comparison of the Hero "greenish" style to the classic version. Just for the fun of it 2 Quote
Vaj Posted November 30, 2015 Author Report Posted November 30, 2015 Some people wonder how to install the Screen mesh correctly. I made an instruction that shows how I do it! Its a big advantage having the Mic tips hollow and being able to push the mesh into from the backside! 1 Quote
Vaj Posted December 15, 2015 Author Report Posted December 15, 2015 (edited) Yes I am working on it. The pictures of the back part nipple I found are not very nice. The diameter of the mic tip and the nipple from the inside fit both perfectly on the black mainbody. The Nipple on the back side is a bit different though at the screen used comlink and it needs to be modified. It would be cool to get some feedback if there is enough interest. Edited December 15, 2015 by Vaj Quote
StructureBD[TK] Posted May 25, 2016 Report Posted May 25, 2016 Hi All, just finished editing and and posting review. Have a look. :-) https://www.youtube.com/watch?app=desktop&persist_app=1&v=yjBzkSqrhSM 2 Quote
Vaj Posted May 25, 2016 Author Report Posted May 25, 2016 Well done Dan! Great comparison! I have to mention in the future my Mic tips will have the screen mesh already installed! So no difficult cutting for everbody anymore I can also offer them painted with airbrush now if wanted. Quote
Admiraldack Posted August 24, 2016 Report Posted August 24, 2016 I'm working with TK1636 on my first build and he showed me your mic tips. They look great - excellent resolution of the raised lettering on the side of the mic and on the smaller piece inside. PM Sent! Quote
swibowoj[TK] Posted November 10, 2016 Report Posted November 10, 2016 who wants comlinks? Hi Marcus, any update for this commlink ? please let me know if there is ongoing run thread for commlink. Quote
Vaj Posted November 10, 2016 Author Report Posted November 10, 2016 well my computer is broken and I can't use my 3D modelling programs. Actually I only have my laptop which is too weak to work with and I need to make the back piece for the com link! I think I will have a new computer in january and continue this project. Quote
KamikazePigeon Posted March 21, 2017 Report Posted March 21, 2017 Dude, these are pretty awesome. Are you ever going to release JUST the 3d files? That would be awesome. Also, sorry to hear about your computer Quote
Vaj Posted March 21, 2017 Author Report Posted March 21, 2017 I already have a new computer The files are not to be released Quote
KamikazePigeon Posted March 22, 2017 Report Posted March 22, 2017 ...A tutorial on how to model them perhaps? I also use Rhino for my modelings stuff. Quote
baldormoline[501st] Posted May 17, 2017 Report Posted May 17, 2017 Marcus, when will you have these for sale? You last posted almost two months ago, and I don't see any other postings. If you aren't going to sell the finished product, then at least please allow those of us across the pond the .stl files, so we can print our own. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.