neoakaj[501st] Posted April 1, 2015 Report Posted April 1, 2015 I have a great picture of the grey det I can send if it helps Quote
bzb Posted April 1, 2015 Author Report Posted April 1, 2015 Sure would help! Especially if it's hi-res. Is there a method to do "A" or "B" separation in the CRL? Has this ever been done before - or would it require a completely separate CRL? I know we've had a couple parts that can be "or" in the TK CRLs, but this is a case where three parts have to match up, either the "A" set or the "B" set. Quote
Barcode Posted April 1, 2015 Report Posted April 1, 2015 Im so confused on what to do for my fiancé kit now...lol. Quote
bzb Posted April 1, 2015 Author Report Posted April 1, 2015 The CRL is pretty close to finished. More than likely, even if you built 100% to CRL specs, you'd still have to do minor adjustments here and there - we all go through that with every kit we build If you want her to stick with the high heeled boots, make sure you use a gray pipe for the TD and the original TD plate that came with the kit. If you want to go with the comic style, use the flatter soled boots, the flat TD panel on a white tube, and attach the comic-style backplate to the back. Quote
stormtrooperguy[501st] Posted April 2, 2015 Report Posted April 2, 2015 The Pre Vizsla (season 2) CRL has an a/b type choice for the jetpack. I think we should show both parts, and for each make sure to say that you have to pic one or the other, and that you have to be consistent. Back Plate (comic) * Costume must include one back plate of either comic or statue style. * Must be detailed with comic style plate as shown * Back plate, thermal detonator and boots must all be of consistent style (comic or statue) 1 Quote
neoakaj[501st] Posted April 2, 2015 Report Posted April 2, 2015 I know that the spec ops were working on a realistic and video game option on the swamptrooper. Not sure if they ever got it done Ill get a very hi res picture of the grey TD tonight. Do you need the statue back plate also? Quote
Darth Aloha[Admin] Posted April 2, 2015 Report Posted April 2, 2015 I know that the spec ops were working on a realistic and video game option on the swamptrooper. Not sure if they ever got it done Ill get a very hi res picture of the grey TD tonight. Do you need the statue back plate also? Yes on the comic back please. -Eric Sent from my iPhone using Tapatalk Quote
stormtrooperguy[501st] Posted April 2, 2015 Report Posted April 2, 2015 With the recall vote complete and a new emergency election happening, my time as LMO is short. I'll only be around until the 13th. I'd love to see us get this CRL green and locked down so that our Legacy Ladies don't have to deal with yet another staff turnover slowing them down. We are certainly close. A few images and some wording tweaks and it will be wrapped up. 1 Quote
h2osafety[TK] Posted April 2, 2015 Report Posted April 2, 2015 Do you have the full body images to use for the CRL? Quote
Darth Aloha[Admin] Posted April 2, 2015 Report Posted April 2, 2015 With the recall vote complete and a new emergency election happening, my time as LMO is short. I'll only be around until the 13th. I'd love to see us get this CRL green and locked down so that our Legacy Ladies don't have to deal with yet another staff turnover slowing them down. We are certainly close. A few images and some wording tweaks and it will be wrapped up. I've got the wiki page open here at work. I'm hoping to do a little tweaking today to add wording for the two different variants. -Eric Quote
bzb Posted April 2, 2015 Author Report Posted April 2, 2015 I'm taking all the parts to the studio on Saturday to get shots with pure white background - Photoshop just isn't doing it for me (plus they were crappy iPhone pics). I'll upload high res of each part late Saturday night, including pulling off the comic style backplate. If Jason can provide the gray statue (full control panel) TD, that should finish it off for individual parts. I'm going to try my best to get Shannon suited up on a pure white background, as well on Saturday. We'll see if she'll cooperate Quote
Darth Aloha[Admin] Posted April 2, 2015 Report Posted April 2, 2015 Sweet man. Thanks. -Eric Sent from my iPhone using Tapatalk 1 Quote
neoakaj[501st] Posted April 2, 2015 Report Posted April 2, 2015 Sounds good. Ill get the Grey TD with the full panel tonight in hi-res and have it e-mailed tomorrow. Quote
bzb Posted April 3, 2015 Author Report Posted April 3, 2015 Sweet man. Thanks. -Eric Sent from my iPhone using Tapatalk Shoot no, thank you and Brian - you guys are making a lot of ladies very happy 1 Quote
neoakaj[501st] Posted April 3, 2015 Report Posted April 3, 2015 Email sent with Grey TD pictures Quote
crow62[501st] Posted April 4, 2015 Report Posted April 4, 2015 Email sent to bzb with High Res pic for boots 1 Quote
bzb Posted April 5, 2015 Author Report Posted April 5, 2015 (edited) Thanks Gio! Here's the full shot front/back (comic style). Working on the individual parts in higher res on white background now. Edited September 28, 2021 by gmrhodes13 photo updated Quote
Darth Aloha[Admin] Posted April 5, 2015 Report Posted April 5, 2015 Thanks man. I've got the crl open on my laptop but I haven't had the time to review and save it. Hopefully tonight. -Eric Sent from my iPhone using Tapatalk Quote
Arnie_DK[TK] Posted April 5, 2015 Report Posted April 5, 2015 What about the assembly seams on the different parts?Right now its stated wich way they should face, but how about making the parts seamless, like with clones? Quote
bzb Posted April 5, 2015 Author Report Posted April 5, 2015 Personally, I don't really understand the "seamless" thing. It's kind of a nitpicky thing that doesn't make total sense. There's gonna be seams somewhere if you're going to get the armor on. IMO, we already have 5+ ladies approved in this with seams. Maybe level 2 or level 3 for the armor is seamless. Quote
Arnie_DK[TK] Posted April 5, 2015 Report Posted April 5, 2015 I dont mind the seams at all, and yes, its a nitpicky thing, but I like them seamless My concern is, that the CRL as it is now, kinda states that the seams have to be there and seamless joints arent allowed. Wich I think is wrong.Probably just a matter of the right words, but still Quote
bzb Posted April 5, 2015 Author Report Posted April 5, 2015 Good point, they shouldn't be required to have seams. Although, I guess it's a matter of how detailed do you want to get in the CRL? There's a lot of missing details in the standard TK when we get nitpicky on approvals, especially in the EIB/Cent levels... does that necessarily cause more confusion? I don't think it did with my build, but I also posted up a lot of photos and questions during my build... Quote
stormtrooperguy[501st] Posted April 6, 2015 Report Posted April 6, 2015 The basic level (black text) should be the absolute minimum we are willing to approve. If seamless is an acceptable option, we can note that at the blue level. We don't want to make the entry level standard any harder than it needs to be Quote
stormtrooperguy[501st] Posted April 6, 2015 Report Posted April 6, 2015 Shoot no, thank you and Brian - you guys are making a lot of ladies very happy That's what we are here for! Quote
Darth Aloha[Admin] Posted April 6, 2015 Report Posted April 6, 2015 On 4/5/2015 at 9:01 PM, bzb said: Thanks Gio! Here's the full shot front/back (comic style). Working on the individual parts in higher res on white background now. Yo man... for the CRL who took the photo and what is her TKID? -Eric Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.