brandontrueblue[TK] Posted March 19, 2015 Report Posted March 19, 2015 (edited) Hi my name is Brandon Laulette, FISD Forum name brandontrueblue and I just received approval at my garrison level for my ESB Stormtrooper. I am in the Golden Gate Garrison TK-12001. I would like to submit my application for EIB status. Please below. Armor Maker = RS Props Helmet Maker = RS Props Blaster Type = DoopyDoo Pipe Build ESB E-11 Height: 5'10" / 177.80 cm Weight: 185 lbs / 83.91 kg Inseam: 34" / 86.36 cm (pants length) Arms: 31" / 78.74 cm (top of shoulder to finger tips) Waist: 32" / 81.28 cm Chest: 46" / 116.84 cm Neck: 17.5" / 44.45 cm Hat Size: 11 Boots: TK Boot size: 11 Canvas Belt = Trooper Bay Hand Plates = Clam Shell - RS Props (secured to gloves with black cotton double stiched using 5 point/star pattern) Gloves = black satin gloves Electronics - iComm static burst, Aker amp, Echo fan bracket with own wiring and battery set up Neck Seal = Darman zipper type Holster = Darman ESB 9 oz. Undersuit = Compression top and pants (I had the photos taken in front my garage. If need be, I can retake photos and resubmit.) Please cut & paste the link below in your web browser. http://s1347.photobucket.com/user/brandontrueblue/library/ESB%20Stormtrooper?sort=6&page=1 Edited March 20, 2015 by brandontrueblue Quote
Tusken RTT Posted March 19, 2015 Report Posted March 19, 2015 You can cut and paste the bbcode (to the right of each image in the menu) to allow the pics to show up without everyone having to use the link. Allow me for the first pic! The build looks fantastic- great job! Only possible issue I see is the ab and kidney piece alignments. It looks like the kidney could be shifted down to better align? You would have to re-do your rivets then to match. Something like this- Quote
Bone[501st] Posted March 19, 2015 Report Posted March 19, 2015 Yes Scott, since the sixth photo something was bothering me with the fit of the Torso. You found it. Also the breastplate is kind of shifted or askew ... But ... does this matter for EIB? Quote
kylebeagle[TK] Posted March 19, 2015 Report Posted March 19, 2015 Looking good trooper!! Best of luck with your application. Quote
ukswrath[Staff] Posted March 19, 2015 Report Posted March 19, 2015 (edited) Hey Brandon, looking nice sir. Great Job Edited March 19, 2015 by ukswrath Quote
gazmosis[501st] Posted March 19, 2015 Report Posted March 19, 2015 So there is no way that these pics can be transferred onto this post? There are several pictures missing. It is just easier on everyone to grab the "EIB" photo checklist and re-edit your application by posting the pics in the order that they are on the list. That way all required pics get posted and it is easier for me to properly assess your build. Quote
ukswrath[Staff] Posted March 19, 2015 Report Posted March 19, 2015 (edited) Photobucket Edited March 19, 2015 by ukswrath Quote
brandontrueblue[TK] Posted March 19, 2015 Author Report Posted March 19, 2015 thanks all! let me take a look again tonight and see if i can repost for my breastplate i didnt snap in a pair of snaps i had rigged beneath the breastplate so in the pics it looks a little like it can flop around some. once snapped in the breastplate does look secure Quote
brandontrueblue[TK] Posted March 20, 2015 Author Report Posted March 20, 2015 Thanks Scott! Still feel a little bit of a dunce am still having trouble loading my photos individually. I did post my pics in a photobucket account, see link above. From the EIB Photo Checklist am still missing the interior strapping, back of helmet, hovi tip detail, neck seal, cod and butt plate attachment and holster attachment. Should be able to get these done this sunday. For the ab and kidney rivets, once I remove the rivets how do you suggest I cover the holes already made? Quote
Tusken RTT Posted March 20, 2015 Report Posted March 20, 2015 Your Imgur account was fine, like I said simply cut and paste the bb code of each image onto your post here, we can then see the photos without clicking on anything. The menu in Imgur is to the right of each image. There is good post going where Tim describes how to fill the holes perfectly- http://www.whitearmor.net/forum/topic/30483-whitehammers-rt-mod-esb-tk-wip/ You will be able to hide them pretty easily using the ABS paste and then sanding and polishing a bit. Good luck and keep us posted! Quote
brandontrueblue[TK] Posted March 20, 2015 Author Report Posted March 20, 2015 Thanks Scott! Honestly I'm a little daunted with having to cover up these holes, but will get it done! Quote
ukswrath[Staff] Posted March 20, 2015 Report Posted March 20, 2015 There is good post going where Tim describes how to fill the holes perfectly- http://www.whitearmor.net/forum/topic/30483-whitehammers-rt-mod-esb-tk-wip/ Scott I think you meant this post from Tim starting at #288 http://www.whitearmor.net/forum/topic/27561-a-slightly-disheveled-medium-and-a-pristine-big-brown-box-arrived-today-darks-rt-mod-anh-hero-and-stunt-build-thread/page-15#entry391605 Quote
Haribon72[TK] Posted April 3, 2015 Report Posted April 3, 2015 HI Brandon! I used this for my shims and it will work to cover the holes: Apoxie Sculpt on Amazon.com Let us know if you need help! 1 Quote
ukswrath[Staff] Posted April 8, 2015 Report Posted April 8, 2015 Hey Brandon stopped by to see how things are going. Rooting for you sir Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.