TK21029[TK] Posted February 15, 2015 Report Posted February 15, 2015 I was hoping someone has experience removing a small area of ABS glue from the front of my helmet. I have rubbed with a rag but not going away. Any help would be appreciated! Quote
gazmosis[501st] Posted February 15, 2015 Report Posted February 15, 2015 Did you get all the glue off for sure and you're just left with a "burn" Mark? Quote
TK21029[TK] Posted February 15, 2015 Author Report Posted February 15, 2015 (edited) Yes it appears so.... It just looks like a "not shiny " area... Sent from a galaxy far far away Edited February 15, 2015 by JedIinTraining Quote
fuumantroop[TK] Posted February 15, 2015 Report Posted February 15, 2015 To really remove any type of CA glue, what I do is just sand it down with some 400 grit sandpaper, then some 800 grit wet/dry sandpaper(sanding it after dipping the sandpaper in a bit of water), then after that, i use all 3 stages of Novus polish(may be overkill but I am not taking chances), and keep rubbing it in until all of the scratch marks are gone. It takes a bit of elbow grease, but it works. I would imagine this method will work for ABS glue as well although I have not tested this just yet. Quote
TK21029[TK] Posted February 15, 2015 Author Report Posted February 15, 2015 Just added the Novus Polish to my Amazon cart. Fingers crossed. Should have it next week. Thanks Sent from a galaxy far far away 1 Quote
Mutter Posted February 15, 2015 Report Posted February 15, 2015 I'd recommend using E6000. Holds strong and easy to fix mistakes. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.