Berbs42[TK] Posted February 8, 2015 Report Posted February 8, 2015 (edited) Name: Chris Berban TK ID: TK-6427Forum Name: Berbs42Garrison: Star Garrison, Imperial Rough Rider Squad (CTX at the time of approval)Armour Maker: AM/(with AM 2.0 chest, back & thighs)Helmet Maker: MTKBlaster Type: HyperfirmHeight: 5'10"Weight: 240 lbs Boots: TK Boots Canvas Belt: Homemade with Insert Hand plates: AM 2.0 trimmed slimmer w/ elastic Gloves: Rubber chemical gloves Electronics: Aker voice amp Neck Seal: Trooperbay Holster: Made by Squadmate Note: My holster is waaaay too far back and under the belt in these pics, and I didn't grab a pic of my neck seal. Also of note, when I first bought this original AM kit from a Trooper who was upgrading, I removed rivets that were misplaced and filled the holes that remained with ABS Paste and sanded that down. Pictures - Full Body Front – Arms at side: Back – Arms at side: Left – Arm raised: Right – Arm raised: Right Side Detail – Arm raised: Left Side Detail – Arm raised: Armor Details Abdomen Details: Action Shot: Cod and Butt Plate Attachment: Interior Strapping: Helmet Details: Front: Side: Back: Hovi Tip Detail: Lens Color (Backlit if required): Blaster Details: Blaster – Left: Blaster – Right: Accessory Details: Neck Seal: Thermal Detonator – Back: Holster Attachment: I realize you want to see this ON the belt... Not UN-Attached... LOL Thanks, Guys!! - Berbs Edited January 25, 2021 by Berbs42 2 Quote
gazmosis[501st] Posted February 8, 2015 Report Posted February 8, 2015 Can you please post a pic of your neckseal? 1 Quote
cm325i Posted February 8, 2015 Report Posted February 8, 2015 Lookin good sir! Sent from my ComLink Quote
gazmosis[501st] Posted February 9, 2015 Report Posted February 9, 2015 Hey Chris! Thank you so much for your EIB application. Nice to see another ESB trooper joining the ranks. Let's take a look at your armor!!! CRL and EIB Application Requirements: All required submission photos have been posted. Nice application! Your armor contains all necessary requirements for EIB so that said, I would like to congratulate and welcome you to Expert Infantry!! Other-Armor Fit/Assembly: In this section, your fellow troopers and myself provide suggestions towards improving the overall look of your armor. Nothing suggested here will affect any application unless specifically noted. I will go into further detail below in "Centurion Suggestions" regarding the far outside edges of your chest plate. I think it would go a long way toward improving your helmet to take the ears down some. I know the feeling of finally getting the ears to fit just right. You back away and say, "Don't touch them any more!!!" The ears can be left to appear thick. As you can see here, the profile of the ear covers were shallow. I agree tht whoever built this helmet could have done a tad better, the depth is what I am making a point about. I have made suggested trim lines: Centurion Suggestions: I mentioned above that I would further elaborate on the sides of the chest. I know that you wanted a bit more coverage on the side seeing I categorize you, like myself, as the beefy trooper. This ridge, however, is distracting away from a Centurion characteristic. If you should apply for Centurion, I'll ask that it be trimmed. You have some interesting gaps in the back. I see the connecting straps on the outer edges of your butt/kidney seam but can't figure out why you get that separation. The gap between your kidney and back, however, is something that you will need to decrease. You will need to integrate the kidney notches. In the pic of your interior strapping I noticed drill holes in the back of your ab button plates. Centurion requirements ask that the buttons on your plate be molded directly into the plate and to NOT be separate buttons. If you apply, please post a detailed close-up of this to confirm they are indeed one piece. For your Centurion pics, I need to see your holster loops around your belt. I like belt security as much as the next guy, but it looks like you have about 12 inches of overlap. You only need the overlap to be about as wide as the square ridge on your butt plate. Since we are on the topic of holsters, If you apply for Centurion, you will need to upgrade your holster. The original holsters were never stitched along the bottom. They were sleeves. There are several affordable options for good replacement holsters in Vern and Darman or available templates to make your own. Congratulations again!!!! 2 Quote
cm325i Posted February 9, 2015 Report Posted February 9, 2015 Congrats! I knew you had it in the bag! 1 Quote
gmrhodes13[Staff] Posted February 9, 2015 Report Posted February 9, 2015 Congrats and welcome to the ranks troope 1 Quote
Snaps[TK] Posted February 9, 2015 Report Posted February 9, 2015 Congrats and welcome to the EIB ranks! 1 Quote
Dark PWF[Staff] Posted February 12, 2015 Report Posted February 12, 2015 Congratulations Berbs!! Welcome to the Ranks!! Star Garrison, Representing!!! Meet you at Centurion! 1 Quote
Berbs42[TK] Posted February 12, 2015 Author Report Posted February 12, 2015 That's the next goal!! More adjustments to make!! Beep Boop... Quote
TK-Sharp[TK] Posted February 13, 2015 Report Posted February 13, 2015 Hi Chris and welcome to the ranks !!! I'm looking forward to see your Centurion request ESB is one of the armors to be put on my list ... it'll never end 1 Quote
Berbs42[TK] Posted March 10, 2015 Author Report Posted March 10, 2015 BTW, Thank you, Steve!! Just realized I never posted that, after I got the award. Must've been in shock! - Berbs Quote
Berbs42[TK] Posted March 10, 2015 Author Report Posted March 10, 2015 Much Appreciated, Scott! - Berbs Quote
Brew2D2[TK] Posted August 12, 2015 Report Posted August 12, 2015 I'm going to follow in your footsteps Berbs! I'll hopefully soon be joining the EIB ranks!! 1 Quote
Berbs42[TK] Posted August 12, 2015 Author Report Posted August 12, 2015 Right on Chad!!! Beep Boop... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.