ukswrath[Staff] Posted January 14, 2015 Report Posted January 14, 2015 (edited) Name = Anthony (Tony) Jobe TK ID = 10116 FISD Forum Name = ukswrath Garrison = Golden Gate Garrison Build Thread: http://www.whitearmor.net/forum/topic/29683-anh-stunt-ata-re-build-part-1/ http://www.whitearmor.net/forum/topic/29684-anh-stunt-ata-re-build-part-2/ Armor= ATAHelmet= ATABlaster= Hyperfirm Height = 5'11" Weight = 190 lbs Boots = Imperial Boots Canvas Belt = TKittell Hand Plates/Gloves = TrooperBay Electronics = N/A Neck Seal = Darman Holster = N/A Inside Brackets = Self made Inner Drop Boxes = kwdesigns Front Back Left Right Action No Helmet Helmet Front Helmet R Helmet L Helmet Rear Kidney & Ab Rivets Right Ab Strap covers Straps Ab Kidney Cod & Posterior Interior assembly Thighs Calves Forearms Gloves Belt Boots TD E-11 Sorry for the bad lighting Edited January 14, 2015 by ukswrath 1 Quote
Tusken RTT Posted January 14, 2015 Report Posted January 14, 2015 Looks fantastic! Your left shin is riding up a bit, I had to do the stirrup and velcro trick to the shoes to keep mine down. I also put a strap running from my back piece across to the chest piece to pull the back tighter to my body, I noticed your back was bowing out just a bit. The helmet paint and blaster look amazing. Great job! Quote
ukswrath[Staff] Posted January 14, 2015 Author Report Posted January 14, 2015 (edited) Looks fantastic! Your left shin is riding up a bit, I had to do the stirrup and velcro trick to the shoes to keep mine down. I also put a strap running from my back piece across to the chest piece to pull the back tighter to my body, I noticed your back was bowing out just a bit. The helmet paint and blaster look amazing. Great job! Thanks for the kudos Scott. Shin & back yea, that was the least of my worries, from lighting and camera issue (bless the Mrs, rough night) just bad timing for taking pictures oh well, I'll redo them for Centurion. Oh and BTW to give credit where credit is due I didn't paint the helmet Jesse McClear did. Thanks a bunch Jesse! Edited January 14, 2015 by ukswrath Quote
The5thHorseman[501st] Posted January 14, 2015 Report Posted January 14, 2015 Looks great . The size of the ab buttons seems a tad big but aside from that it's mostly perfect. One easy thing you could do with your thermal detonator would be to cut the end of your clips just above the screw holes, and then bring down the main panel: Sorry for the bad lighting Terrible i'd say! Quote
ukswrath[Staff] Posted January 14, 2015 Author Report Posted January 14, 2015 Great advise, especially on the TD, easy fix. Thank you very much. Lighting, yea tell me about it. Actually I think something's wrong with the camera also, filtering issue or something. Looking into it as we speak. Quote
ukswrath[Staff] Posted January 14, 2015 Author Report Posted January 14, 2015 Go Tony! Haha thanks Pat Quote
Snaps[TK] Posted January 14, 2015 Report Posted January 14, 2015 Nice job! Good luck with your application! Quote
ukswrath[Staff] Posted January 14, 2015 Author Report Posted January 14, 2015 Nice job! Good luck with your application! Thank you Quote
ukswrath[Staff] Posted January 15, 2015 Author Report Posted January 15, 2015 Looks great my friend! Thanks Brian. Aren't about ready to join me? Team Imperial Boots Quote
Polar Posted January 15, 2015 Report Posted January 15, 2015 haha soon! this waiting on my basic is killin me here! Quote
ukswrath[Staff] Posted January 15, 2015 Author Report Posted January 15, 2015 haha soon! this waiting on my basic is killin me here! Still waiting on basic? How long ago did you submit? Quote
Polar Posted January 15, 2015 Report Posted January 15, 2015 last saturday, Ive already been scolded and told to be patient lol Quote
ukswrath[Staff] Posted January 15, 2015 Author Report Posted January 15, 2015 last saturday, Ive already been scolded and told to be patient lol Saturday, yea that's pretty recent. We'll see you up there soon Quote
Dark PWF[Staff] Posted January 15, 2015 Report Posted January 15, 2015 Great looking build Tony. I don't see anything that hasn't been mentioned so far - and that isn't much at all. The paint job is absolutely beautiful. Kudos to your painter! Good luck! Quote
ukswrath[Staff] Posted January 15, 2015 Author Report Posted January 15, 2015 (edited) Great looking build Tony. I don't see anything that hasn't been mentioned so far - and that isn't much at all. The paint job is absolutely beautiful. Kudos to your painter! Good luck! Thanks Tim. Yea Jesse did an excellent job on the bucket. I wish I had steady hands to paint like that. Edited January 15, 2015 by ukswrath 1 Quote
ukswrath[Staff] Posted January 16, 2015 Author Report Posted January 16, 2015 (edited) TD revisions as suggested. Edited January 16, 2015 by ukswrath Quote
Spycee[TK] Posted January 16, 2015 Report Posted January 16, 2015 Great build ! I only have one question : I have the feeling that your TD is a bit more than 7.5", is it possible ? Your clips don't go under the central piece. Quote
ukswrath[Staff] Posted January 16, 2015 Author Report Posted January 16, 2015 Great build ! I only have one question : I have the feeling that your TD is a bit more than 7.5", is it possible ? Your clips don't go under the central piece. Hey Alex, good question I'll have to check that, I'm pretty certain it is though. I know my clips may not be as wide as some I've seen giving the illusion the body's longer. Will double check. Quote
Spycee[TK] Posted January 16, 2015 Report Posted January 16, 2015 It was the width between your white pieces that caught my attention first, but it may just be an optical illusion. Quote
ukswrath[Staff] Posted January 16, 2015 Author Report Posted January 16, 2015 Yea funny thing if you look at my original post the TD doesn't look too wide but on the bench, wow I can totally see your point. Maybe it's the camera, weird. Quote
gazmosis[501st] Posted January 16, 2015 Report Posted January 16, 2015 Mr. Tony!!! Thank you so much for your EIB application!! Your armor was a pleasure to look over. So let's get to it! CRL and EIB Application Requirements: All required submission photos have been posted. I am pleased to say that your armor hits all points as required for EIB. Congratulations and welcome to Expert Infantry!! Other-Armor Fit/Assembly: In this section, I summarize observations made by myself and your fellow troopers that go towards the overall look of your armor. Unless specifically stated, these will not influence any application. You did your homework, Sir and this is evident in a beautiful, clean build. Credit your friend Jesse for his paintwork on your helmet. The only thing I have in regards to your fit is that your thighs could come up a tad but that is so minor. Overall great work! Something that is worth mentioning is your Thermal Detonator. Why we still have undersized thermal detonators is beyond me but until that change is made it is what it is. A smaller diameter "TD" will make it look longer than it really is. However, that is not my concern as much as your belt clips. You did well in the adjustment to make them better align with the bottom of the control panel, but the width compared to the size of the screw heads just throws me off. The original TD clips were just about 1 1/8 inches (28 mm) wide. Yours look so much smaller than that. I just think it would be a shame to not make this simple upgrade that would greatly improve the look of yours. Nice work again!!! Centurion Suggestions: I see one issue that might affect this and that is your drop box location. If it was just a matter of sliding the loop over...no problem. However, you have your straps directly attached to the belt which is not allowing your drop boxes to align properly with the end of the belt. Congratulations again on a fine set of ATA!! Quote
ukswrath[Staff] Posted January 16, 2015 Author Report Posted January 16, 2015 Thank you Steve and thank you FISD community. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.