CorrosiveHitman Posted June 11, 2014 Report Posted June 11, 2014 (edited) Armor - TM 1.5mm ABS Helmet - TM 1.5mm ABS Blaster - Doopy doos full resin build Doopy doos DLT-19 Optional Height - 5ft 7in Boots- Painted Chelsea boots Canvas Belt - TM screen accurate Belt Hand Plates - Karin Sonnenschein Electronics - Rom FX Neckseal - ? Holster - TM Front Back Left âƒRight Right Side Detail – Arm raised Left Side Detail – Arm raised Abdomen Details Action Shot Cod and Butt Plate Attachment Interior Strapping Side Back Hovi Tip detail Lens Color (Backlit if required) Blaster – Left Blaster – Right Neck Seal Thermal Detonator – Back âƒHolster Attachment Edited June 12, 2014 by CorrosiveHitman Quote
captsafe66[Admin] Posted June 11, 2014 Report Posted June 11, 2014 Looks like a great set of armor! Good Luck! Quote
Holnave (evan_loh)[TK] Posted June 11, 2014 Report Posted June 11, 2014 Nice to see you here Lee. All the best Quote
Vader’s Wingman[501st] Posted June 11, 2014 Report Posted June 11, 2014 Fantastic build Lee! Well done! There are a lot of required photos missing as you mentioned but from what I see, not much to say. I would scootch your drop boxes over a hair so they are even with the belt edge and your Hengstler counter looks to be mounted a bit high on your blaster. I look forward to seeing the rest of your photos! Good luck! Quote
CorrosiveHitman Posted June 12, 2014 Author Report Posted June 12, 2014 Hopefully that should be all the photos, if I am missing any please let me know. Quote
gazmosis[501st] Posted June 13, 2014 Report Posted June 13, 2014 Mr. Hitman! Thank you for your application for EIB!! Troopermaster is outstanding armor and your build skills did it justice! Well done! Let's look at your armor CRL and EIB Application Requirements: All submission photos are present and your armor meets the requirements for EIB. With that I would like to congratulate and welcome you to EIB!!! Other-Armor Fit/Assembly: You really took your time trimming this armor out. Fantastic attention to detail. I have only one thing to mention regarding the overall assembly of your armor and it has to do with your paint choice. This will not affect your applications and it meets the requirements however the gray that you chose for the traps, the tears, the frown and the ab buttons is very light. It is almost too light. In this side by side, you can better see what I mean: You won't need to change it, but I did want to bring it up for future references. Your paint details, by the way, are very well done!!! The other thing I wanted to bring has to do with your blaster. These are also somethings that can be overlooked but you might want to add to a future "to do" list to correct. Your cocking handle is on backwards. the curve should be towards the front. Your counter is mounted very high. Ideally, it should be mounted to come very close to the main receiver body. Centurion suggestions: Your details lead me to believe there is a possible Centurion application in your future. Aside from providing the proper photos from the checklist, there is only one thing I can see that needs adjusting. You will need to adjust the fit of your back plate so that it does not overlap the kidney plate so much. The second suggestion won;t affect your Centurion application, but if you plan on using the DLT-19, you should step it up by adding the wires that wrap the t-tracks in front like this: You can also erase the alignment pencil mark on your ab Congratulations again!!! Note to self: lose weight so you can get one of these incredible suits!!! Quote
CorrosiveHitman Posted June 13, 2014 Author Report Posted June 13, 2014 (edited) Thank you for reviewing my eib application. With regard to the paints i used the correct humbrol paints, must be my bad photography skills. I will also get the eraser out and remove the pencil marks. I have got the wires to do the dlt mod. Not sure there is much i can do about the cocking handle, but its a good excuse to get a new blaster. Edited June 13, 2014 by CorrosiveHitman Quote
gmrhodes13[Staff] Posted June 13, 2014 Report Posted June 13, 2014 Congrats and welcome to the ranks Quote
gazmosis[501st] Posted June 13, 2014 Report Posted June 13, 2014 Perhaps the flash just washed the color out. Nice work, though overall!!! Quote
Vader’s Wingman[501st] Posted June 13, 2014 Report Posted June 13, 2014 Congrats brother! And welcome to EIB! Quote
SIMpixels Posted June 15, 2014 Report Posted June 15, 2014 Congrats Lee, see you in a couple of weeks. Quote
FunkyTrigger[TK] Posted June 24, 2014 Report Posted June 24, 2014 Hi Lee, congratulations on your EIB award.You have done well. Quote
Vader Rocks Posted June 24, 2014 Report Posted June 24, 2014 Congrats trooper, some nice looking armor you've got there. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.