Chewie Jones[TK] Posted March 14, 2014 Report Posted March 14, 2014 Name=Ruben Dogliani Forum Name=Dogliani Garrison= Argentina Garrison ID=6018 Armor = ATA Helmet= ATA Blaster= Doopydoo´s Complete ANH E-11 Blaster Kit Height = 1, 77 mts. Weight = 82 Kgs. Boots = TKBoots Canvas belt = Trooperbay Hand Plates = Selfmade (Latex) Electronics= ROM/FX Pro Kit Neck Seal = Stormtrooper-costumes (UK) Holster = Trooperbay Full Body Front Full Body Back Full Body Right Full Body Left Right Side Detail Left Side Detail Gloves Thigh Pack Attachment Sniper Knee Attachment Drop Box Back Crotch/ Butt Detail HELMET DETAIL PHOTOS Front Side Back Hovi Tip Detail Lens Color (Backlight if Necessary) ACCESSORY PHOTOS Ammo Belt Neck Seal Blaster Left Side Blaster Right Side Thermal Detonator Back Action Shot OPTIONAL Interior Strapping Abdomen Detail Quote
Chewie Jones[TK] Posted March 14, 2014 Author Report Posted March 14, 2014 Shoulder Bridge Back Quote
LadyInWhite[TK] Posted March 14, 2014 Report Posted March 14, 2014 Wow, excellent job, looks fantastic! Quote
gmrhodes13[Staff] Posted March 14, 2014 Report Posted March 14, 2014 Looking good, bit worried about your thigh pack attachment, looks like you have used rivets, not cap heads. TD clips could be closer to the end caps. Also the centre cover on your belt seems to be sitting up off the belt. Lastly some bronze weathering on you scope would look great Quote
Chewie Jones[TK] Posted March 14, 2014 Author Report Posted March 14, 2014 Thanks Ingrid and Glen. Here I send picture of DT. (I mistakenly put some old photos) Now I will correct those details! Greetings from Rosario, Argentina! http://imageshack.com/a/img17/3363/d8w1.jpg Quote
Chewie Jones[TK] Posted March 14, 2014 Author Report Posted March 14, 2014 http://imageshack.com/a/img17/3363/d8w1.jpg Quote
I'm Batman[501st] Posted March 14, 2014 Report Posted March 14, 2014 That looks a lot better. Original one seemed to have curved ends as well which I've never seen before. Quote
gazmosis[501st] Posted March 15, 2014 Report Posted March 15, 2014 Hello Ruben! Thank you so much for your Centurion application. You have some fantastic looking ATA armor! Some other troopers have chimed in with their points of view on certain issues. Centurion is the highest level of accomplishment so we want to make sure you look your best and sometimes that means getting particular. Let's get to your armor. CRL Requirements: There is one photo missing from the required photo checklist. This one is kind of important that cannot be seen in any other pics (yes, I checked your imageshack pics too ) It is a picture of the "S" trim on the neck opening of your helmet. There is a picture of the trim, but I can;t tell for certain if it's the "S" trim. I saw and appreciate you following up on the comment regarding your Thermal Detonator clips being too far in. Not only did you move them outward, but you colored the screws black. Nice work!! The next issue that needs to be addressed is the pop rivet that was used to attach your thigh pack on your right thigh. It must be a solid head rivet with no dent in the middle. It can be a split rivet, but should be a cap or speed rivet as used in the film and should be slightly smaller than the rivets on your left side. The last issue I need to touch on is the return edge on the wrist side of your forearms. It is not perfectly clear and my eyes hurt from straining to see. A return edge is best described as any bend, curve or change in direction on the edge of any armor part compared to the surface. The wrist opening of the forearm should have no curve or edge of any kind. it should be flat and this includes into the ridge with the square indents and finish strips. Armor Fit/Assembly: You have done a fine job fitting your armor to you. Outstanding work!! A trooper had made a comment regarding the center button cover on your belt. I know there is not much that can be done about ATA's button covers. There is little gluing surface . Until that changes we just need to go with it. The straps that connect your drop boxes to your belt are very close to being almost too long. If they were ANY longer, I'd have you shorten them but with the belt on your armor, you can't tell and it looks good. This leads to another point about your belt. Although it won't affect the outcome of your application, your belt should either touch or slightly overlap the bottom of the button plate. Nothing that is listed above should take any great deal of time or effort to clear up. Address those and I will clear you for Centurion!!!! Quote
Chewie Jones[TK] Posted March 15, 2014 Author Report Posted March 15, 2014 Hi Steve! Thank you very much for your words! They are very helpful! I have already started with some details. Here I send some pictures. I hope in a few days if any at all resolved. With respect to the left wrist not quite understand what I should do. Sorry for my English! You can show an image of how it should be? Regards, Thank You! Quote
gazmosis[501st] Posted March 15, 2014 Report Posted March 15, 2014 Thank you for the picture of the "S" trim and have no worries about your English. I will do my best help you understand. The opening of your forearm part closest to your hand should have no curve on it. Here are some pictures: Thank you for taking care of these things and I hope the pictures explained things. Your pictures did not show a close up of your forearm opening but it looked like there was a curve on yours. Can you post a picture of yours to make sure? Quote
Chewie Jones[TK] Posted March 15, 2014 Author Report Posted March 15, 2014 Thank you, Steve! .. Have a little curve the edges. I will not have problems in reducing them. It has been a great help! A greeting and thank you very much! Soon I will upload more pictures. Quote
Chewie Jones[TK] Posted March 17, 2014 Author Report Posted March 17, 2014 Hi Steve! Here I send photos of the reforms that you said. I hope they are correct ..! I still have to cut the seat belt. Greetings and Thank You again! 1 Quote
gazmosis[501st] Posted March 17, 2014 Report Posted March 17, 2014 You are a rockstar, Ruben!!! Thank you so much for your upgrades and I would like to congratulate and welcome you to Centurion!! You will make your Garrison proud!! 2 Quote
Chewie Jones[TK] Posted March 17, 2014 Author Report Posted March 17, 2014 Wow!, Steve. Thank you very much! I have lived many years in Spain, and shared many missions with the Spanish Garrison, "My Brothers". Since a couple of years of my transfer request Garrison ago. I'm in Argentina, and it's a honor to be the FIRST SOUTH AMERICAN CENTURION. ... Still I can not believe it. It is an old dream come reality!! Thank you! 1 Quote
Locitus[Admin] Posted March 17, 2014 Report Posted March 17, 2014 I'm in Argentina, and it's a honor to be the FIRST SOUTH AMERICAN CENTURION.I think that deserves a kudos. Quote
Chewie Jones[TK] Posted March 17, 2014 Author Report Posted March 17, 2014 Thank you! I'm still very Excited. ..It is an immense pride that I feel! I want to share it with my brothers TK's worldwide Here I leave my logo Garrison. Since it does not appear in my status. http://imageshack.com/a/img31/5484/ezwa.jpg Thank you again! Quote
gazmosis[501st] Posted March 17, 2014 Report Posted March 17, 2014 I had no idea!!!! WOW Congrats, Sir!!!!!! Quote
gmrhodes13[Staff] Posted March 17, 2014 Report Posted March 17, 2014 Congrats and welcome to the ranks Quote
Chewie Jones[TK] Posted March 18, 2014 Author Report Posted March 18, 2014 Thank you Steve and Glen! It has been a very important day for me! Thanks for the advice and helping me get a better armor. Quote
kylebeagle[TK] Posted March 18, 2014 Report Posted March 18, 2014 Congratulation Ruben and welcome to the ranks!! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.