Tesla Kinetic[TK] Posted February 19, 2014 Report Posted February 19, 2014 Scott Alan Wilcox TK-42194 Tesla Kinetic Star Garrison Armor = [AP]Helmet = [AP] Blaster = E-11 from Hyperfirm Height = 5'10"Weight = 135 lbsBoots = TKBoots Canvas Belt = Trooperbay Inner Drop Boxes = KWDesignsRubber Gloves / Hand Plates = TrooperbayElectronics = Aker Voice Amp / iCOMM from Jim Sauter (TK Products LLC) Neck Seal = Tim BellHolster = Trooperbay TD Clips = Jesse Quote
Minuteman Posted February 19, 2014 Report Posted February 19, 2014 Impressive - most impressive! The only suggestion that I have (will probabaly not influence the application) is that you could connect biceps to forearm. Thereby reducing the elbow gap you will just look a tad more like you walked right of the screen. And that´s what it´s all about, isn´t it Good job trooper Quote
The5thHorseman[501st] Posted February 19, 2014 Report Posted February 19, 2014 Impressive - most impressive! The only suggestion that I have (will probabaly not influence the application) is that you could connect biceps to forearm. Thereby reducing the elbow gap you will just look a tad more like you walked right of the screen. +1 Steffen beat me on that, all Centurion should really have that strap! One of the most important IMO. Your back plate overlap a bit too much your kidney plate too, especially on your right side. Perhaps you could try to shorten a bit your shoulder strap on this side to bring the back plate up. I have AP too and we're almost the same size but my backplate doesn't overlap my kydney plate like that. Also i don't think it would impact your Centurion application, but your back cover strips are a bit long, they should end before the bottom ridge: Still it's very pleasant to see an AP, especially a very well assembled one like that Good luck! Quote
Tesla Kinetic[TK] Posted February 19, 2014 Author Report Posted February 19, 2014 Thanks! Yeah, I was having trouble standing up straight, I injured my shoulder a few days ago. Quote
captsafe66[Admin] Posted February 19, 2014 Report Posted February 19, 2014 Looks Great!! Good Luck!! Quote
Toddo[TK] Posted February 19, 2014 Report Posted February 19, 2014 Beautifully clean build. Best of luck. Quote
Rezablad3[TK] Posted February 20, 2014 Report Posted February 20, 2014 agreed....this is an awesome build. just a few little tweaks and you're there... Good luck.. Quote
kylebeagle[TK] Posted February 20, 2014 Report Posted February 20, 2014 Looks excellent... Most excellent!!! Quote
Boltstrooper[TK] Posted February 20, 2014 Report Posted February 20, 2014 Scott -- Nice build. Good luck with your submission. Quote
ZacMuleer[TK] Posted February 20, 2014 Report Posted February 20, 2014 Awesome work, Scott. Very impressed. Quote
gazmosis[501st] Posted February 20, 2014 Report Posted February 20, 2014 Hey Scott. Thank you for giving us the treat by looking at this wonderful AP build. May I say...."Holy snap-a-palooza!!" With that said, let's get into your application. You are so close, but there are a couple things I would like you to look into before I pass you. CRL Requirements: As I said, you are right on the edge. I reviewed your EIB thread along with this application in detail and what sticks out the most is the overlap of your back plate over your kidney. I cannot see how you attached the strap that joins your chest/back over your shoulders, but if it is snapped to your back plate, an additional snap just a bit higher will pull your back up to where it needs to be. After the fix, please make sure to post a pic of the armor on you to assure the fit is where it needs to be. The last item I will need clarification on is your forearms. There should be no return edge at all on the wrist side. In the one photo where your forearms are on the table next to your splayed armor, I see curvature on the wrist opening. Any curvature is still considered return edge however slight. Both these issues are EASILY update-able. Other-Armor Fit/Assembly It was mentioned above regarding a connecting strap between your forearms and biceps. This is up to you. I suggest it if you have a problem with your forearms falling, but if you don't, carry on. If I was to suggest something that would not affect your application but improve your overall look, it would be to shorten the cover strip on the backs of your thighs and shins. The cover strips should come UP TO the ridge line not go over. (see above thigh pic). Please make thee simple updates so I can get you in the ranks of Centurion!!! Well done on the build!!!! Thank you! . Quote
Tesla Kinetic[TK] Posted February 20, 2014 Author Report Posted February 20, 2014 Wow! Thank you everyone for the grand compliments! I can think of no better compliments than the ones that come from your peers! Gazmosis, thank you and I will make these easy mods and post the images soon! Back Plate overlapping Kidney Plate Remove Forearm wrist return edge (there is just a bit I can remove) My forearms are kept strongly in place with foam inserts I made, BTW. My thighs were a nightmare but I will definitely consider the alteration! Quote
gazmosis[501st] Posted February 20, 2014 Report Posted February 20, 2014 No one would tell that you had a hard time with your thighs.....or any other part of your armor! We all hope your shoulder is feeling better. Quote
Tesla Kinetic[TK] Posted February 21, 2014 Author Report Posted February 21, 2014 My shoulder will be fine, thanks, just pulled a few muscles (ouch). So here are my modifications. I sanded the forearms return edge and the back plate, which is attached via elastic to the kidney plate, just needed slightly longer elastic to ease up on the pull from the kidney plate. Quote
gazmosis[501st] Posted February 22, 2014 Report Posted February 22, 2014 Scott: Thank you for making the adjustments! THAT is the way it should look. As for your your forearms, I had to look back at your pictures above. I thought you could take a little more out of the square indent ridge like in RS or TM armor but if you took any more out, you would actually be into one of the square indents. I would rather you keep it as is than go into the dent. Well done and welcome to Centurion!!! Quote
Holnave (evan_loh)[TK] Posted February 22, 2014 Report Posted February 22, 2014 Congrats buddy! Welcome to the ranks Quote
gmrhodes13[Staff] Posted February 22, 2014 Report Posted February 22, 2014 Congrats and welcome to the ranks Quote
Clamps[TK] Posted February 22, 2014 Report Posted February 22, 2014 Congrats on your Centurion appointment Trooper! Quote
Tesla Kinetic[TK] Posted February 22, 2014 Author Report Posted February 22, 2014 I am so happy, everyone! Thank you, Gaz<br /><br /><br />TK-42194<br /><br /> Quote
Tesla Kinetic[TK] Posted February 22, 2014 Author Report Posted February 22, 2014 ...sorry I dropped my phone!<br /><br />Thank you Gazmosis, and everyone in my Garrison and all across the 501st who helped me and supported my efforts! Centurion: ACHIEVED!<br /><br />8^)<br /><br /><br />TK-42194<br /><br /> Quote
Tesla Kinetic[TK] Posted February 22, 2014 Author Report Posted February 22, 2014 Scott: Thank you for making the adjustments! THAT is the way it should look. As for your your forearms, I had to look back at your pictures above. I thought you could take a little more out of the square indent ridge like in RS or TM armor but if you took any more out, you would actually be into one of the square indents. I would rather you keep it as is than go into the dent. Well done and welcome to Centurion!!! Wow! Having that CENTURION status marker under my name *really* means a lot to me. I will strive to earn it every troop and encourage others to seek the same status. This is a great feeling! Quote
A Master Builder Posted February 23, 2014 Report Posted February 23, 2014 You earned it! Congrats man! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.