Doopy build...real Sterling folding stock

[Fumanchewie[TK]]

Exceptional work! You have set a high bar. Kudos.

[redinight]

Congrats! It's masterful. It looks absolutely real in all those details.

[gazmosis[501st]]

Thank you guys!!!

[Jello650]

Following, just got a real butstock as well for my pipe built . Your built is amazing and has aready help me a lot.  :icon_bow: :icon_bow:

 

Also thanks again Steve for the MAG, it is  awesome.  Worth every penny and way better then the one that comes with the Doopy kit.

[Jpjn45]

How can I get a functioning folding stock for a doopy doos e-11 blaster? 

[I'm Batman[501st]]

https://www.apexgunparts.com/machine-guns/sub-machine-guns/sterling-l2a3/sterling-l2a3-folding-buttstock.html

 

Apex Gun parts is a popular place. Depending on where you live of course, and the legalities of importing to your location.

[Jpjn45]

I checked it out and the price is great. It will fit the doopy doos e-11 blaster correct?

[I'm Batman[501st]]

You've just read about the mods Gazmosis had to make, to make it fit his. Mine was a aluminium pipe build, so a little different.

[Jpjn45]

I bought a abs folding stock but when I closes the stock the sides of the wishbone did not clear the magazine area enough to properly lock the stock in its closes position. So I am a little disappointed . Thanks,  Joey 

[cjdesign[TK]]

You need to alter the front locking notch to accept the sterling stock without risk of breaking the dds resin.

Edited June 5, 2018 by cjdesign

[Jpjn45]

I know what you are talking about.  I bought a completed doopy doos e-11 blaster but how do you sand down the notch area? Any suggestions?  You cut out the outlined square and put in an aluminum piece and then cut to fit the locking mechanism? 

[cjdesign[TK]]

1 hour ago, Jpjn45 said:

I know what you are talking about.  I bought a completed doopy doos e-11 blaster but how do you sand down the notch area? Any suggestions?  You cut out the outlined square and put in an aluminum piece and then cut to fit the locking mechanism? 

Yes, I originally drilled a hole in the stock hinge area and inserted my hobby tube. Worked great! Unfortunately, the first time I fully locked the stock the piece holding the stock locking mechanism in place broke off so I knew I had to add metal in there some how.. I also went with a real sterling end cap without risk of breaking the DDs resin version.

You'll need a small file or Dremil to complete the excavation. Once the metal is in place, fill will 2 part putty and sand down. Works great. 

Edited June 5, 2018 by cjdesign

[Jpjn45]

Can you send the picture of the cut I need to make in order to instal the aluminum piece for the notch. I can't find it.  Please include any measurements and tools I need in order to make the cut. My email is: Jpjn45@gmail.com 

[Jpjn45]

What dremmel bit did you use on the resin on the locking notch for the folding stock.?

[cjdesign[TK]]

On 6/8/2018 at 10:20 AM, Jpjn45 said:

What dremmel bit did you use on the resin on the locking notch for the folding stock.?

Hey Joey,

My ESB DDs thread is available under my signature. Please post questions regarding my build under my thread. thanks in advance. 

[Jpjn45]

You used a pen for the hollow studs to connect the stock to the body. What other objects can you use to attach the stock to the body?

[Dracotrooper]

On ‎6‎/‎5‎/‎2018 at 10:41 AM, Jpjn45 said:

I know what you are talking about.  I bought a completed doopy doos e-11 blaster but how do you sand down the notch area? Any suggestions?  You cut out the outlined square and put in an aluminum piece and then cut to fit the locking mechanism? 

Here's another option for you Joey. See what Banelives85 does who successfully installed an apex folding stock onto a doopydoos resin e-11 blaster.

 

 

Hope that helps! cheers!