Doopydoo's Complete Resin kit E-11

[hairball[501st]]

Got a packet today.  Looking forward to start the build. The folding stock is in one piece. Sorry for the bad pictures, better pictures will come

Edited December 4, 2013 by hairball

[DroidHunter]

I didn't think the full kit had the counter and the power cells. The pics didn't used to show those pieces.

[gmrhodes13[Staff]]

Looking forward to the build

[Felice]

The pictures show the complete kit

[Arnie_DK[TK]]

Looks like they changed the endcap... looks like its solid, instead of hollow... strange

[Arnie_DK[TK]]

Haha, My mistake... Didnt notice it was turned with the rear up

[hairball[501st]]

Did some more work today. Lots of sanding and drilling. The alanshead bolds needs some black color before i screw/glue them in .

[gmrhodes13[Staff]]

Nice work, looks like you have done some research, keep up the good job

[SorenM[TK]]

Looking ver good so far :-)... One minor detail is that the screws used in the Hengstler should have only one straight slot, not two crossed slots....

Edited December 6, 2013 by SorenM

[hairball[501st]]

Looking ver good so far :-)... One minor detail is that the screws used in the Hengstler should have only one straight slot, not two crossed slots....

Thanks, will look into it.

[hairball[501st]]

its there a MB limit for uploading pictures here?

[The5thHorseman[501st]]

Yes, there's a limit on how much MB you can upload directly on the FISD.

 

Just use an external Host like photbucket, flickr, etc and then link the pic here. There's a tutoriel on how to do that here:

http://www.whitearmor.net/forum/tutorials/article/5-howto-post-images-on-the-forums/

[SorenM[TK]]

I use Imgur...pretty straight forward:-)

[hairball[501st]]

Thanks for the tips   :-)

Some pictures from yesterday, new ones coming to morrow. (i have working trigger and firemode)

 

 

Edited December 7, 2013 by hairball

[hairball[501st]]

Test fitting the charging handle, seems like i have to build up the charging rod, so it comes closer to the surface.

Edited December 8, 2013 by hairball

[hairball[501st]]

 

 

 

The scope is brass underneath

 

Edited December 8, 2013 by hairball

[hairball[501st]]

for me this paint is utter crap, don't bye it.

[SorenM[TK]]

Coming along nicely....:-)

[hairball[501st]]

Scope paint and weathering done, done drill out the front and back and insert some acrylic glass.

 

[hairball[501st]]

working on the iron sight.

 

[gazmosis[501st]]

Outstanding work, sir. Following this with great interest!

[hairball[501st]]

Replaced the pins on the side, i felt that they where not distinguish enough. 

 

 

I wanted to hollow out the end of the end a bit more.

 

Edited December 9, 2013 by hairball

[hairball[501st]]

iron sight

 

Edited December 9, 2013 by hairball

[hairball[501st]]

working trigger and fire mode, paint not finished yet.

 

 

 

Edited January 2, 2014 by hairball

[SorenM[TK]]

Really nice!.:-)