SorenM[TK] Posted September 25, 2013 Report Posted September 25, 2013 (edited) Costume InformationMandatory Information Armor = Trooper Master Helmet= Trooper Master Blaster= DoopyDoos full resin kit, with added details Optional Height = 180cm. Weight = 92 kg. Boots = Loake 290, painted white. Canvas belt = Trooper Master Hand Plates = Trooper Master, latex painted white Electronics= Icomm, Aker amp Neck Seal = Veedox Holster = Trooper Master Application PhotosArmor PhotosFull Body Front Full Body Back Full Right Full Left Right Side Detail Left SIde Detail Helmet Detail PhotosFront Left Side Right Side Back Hovi tip detail Lens color (Backlit) Accessory PhotosAmmo belt Neckseal Blaster left side Blaster right side Blaster rear Thermal detonator back Action Shot OptionalInterior Strapping Abdomen Detail Thank you for your consideration. Edited September 29, 2013 by SorenM Quote
gazmosis[501st] Posted September 25, 2013 Report Posted September 25, 2013 Should be an easy pass. Looks great to me!! You might want to look into trying to get your thighs an inch higher. It might give the concentration around your knees a little relief. Quote
gmrhodes13[Staff] Posted September 25, 2013 Report Posted September 25, 2013 Was just going to say lift those thighs up a little, oh and straighten that belt lol, should be an easy pass, good luck Quote
SorenM[TK] Posted September 25, 2013 Author Report Posted September 25, 2013 Should be an easy pass. Looks great to me!! You might want to look into trying to get your thighs an inch higher. It might give the concentration around your knees a little relief. Thanks I did that just after the pics were taken (I was in a bit of a hurry, as I was leaving for a course, that I am presently attending), I shortened the straps 3 cms, and now the thighs sit high and tight.. Quote
SorenM[TK] Posted September 25, 2013 Author Report Posted September 25, 2013 Was just going to say lift those thighs up a little, oh and straighten that belt lol, should be an easy pass, good luck Sir yes sir! (done )...... Quote
captsafe66[Admin] Posted September 25, 2013 Report Posted September 25, 2013 Looks Great!! Good Luck Trooper!! Quote
SorenM[TK] Posted September 25, 2013 Author Report Posted September 25, 2013 Looks Great!! Good Luck Trooper!! thanks so much ! Quote
SorenM[TK] Posted September 25, 2013 Author Report Posted September 25, 2013 awesome built! Thank you Oso , (I cannot take credit for the build though, that goes to TM)..... Quote
The5thHorseman[501st] Posted September 25, 2013 Report Posted September 25, 2013 You might need to take a picture with a ruler next to your side gaps. For EIB, the CRL says that: "For level two certification (if applicable): Any gap between the ab and kidney plate shall be no more than 1/2" (12.5mm) wide. Any shims used to achieve this effect should be of a similar material and color as the ab and kidney plate. Shims shall fit flush and seams are allowed ." Still, good luck with your approval ! Quote
SorenM[TK] Posted September 25, 2013 Author Report Posted September 25, 2013 (edited) You might need to take a picture with a ruler next to your side gaps. For EIB, the CRL says that: "For level two certification (if applicable): Any gap between the ab and kidney plate shall be no more than 1/2" (12.5mm) wide. Any shims used to achieve this effect should be of a similar material and color as the ab and kidney plate. Shims shall fit flush and seams are allowed ." Still, good luck with your approval ! I know.......I am simply too fat... Edited September 25, 2013 by SorenM Quote
The5thHorseman[501st] Posted September 25, 2013 Report Posted September 25, 2013 Perhaps you could try to pull your stomach in for the pic and then... Let it go Quote
SorenM[TK] Posted September 25, 2013 Author Report Posted September 25, 2013 Perhaps you could try to pull your stomach in for the pic and then... Let it go A right Jester you are..ehh ? ..... Quote
SW1 Posted September 25, 2013 Report Posted September 25, 2013 Looks friggin good to me mate easy pass Quote
SorenM[TK] Posted September 25, 2013 Author Report Posted September 25, 2013 Looks friggin good to me mate easy pass cheers :-) Quote
FunkyTrigger[TK] Posted September 25, 2013 Report Posted September 25, 2013 I like your look and build. If you have attended to your thigh gap, Have you also shortened the right shoulder bell elastic to bring in the right shoulder gap? I'm not too worried about your ab to kidney side gap. It looks in proportion to your body, however the CRL does specify a half inch gap. You are allowed a seam for EIB Can you add a shim do that the CRL requirements are all ticked off? If not, please pm me with your reasons and I Will have your application put to a voting panel. Good luck trooper, You are very nearly there. Quote
SorenM[TK] Posted September 25, 2013 Author Report Posted September 25, 2013 I like your look and build. If you have attended to your thigh gap, Have you also shortened the right shoulder bell elastic to bring in the right shoulder gap? I'm not too worried about your ab to kidney side gap. It looks in proportion to your body, however the CRL does specify a half inch gap. You are allowed a seam for EIB Can you add a shim do that the CRL requirements are all ticked off? If not, please pm me with your reasons and I Will have your application put to a voting panel. Good luck trooper, You are very nearly there. Thanks Phil. I have shortened the thighs, and on the shoulder I have reversed the bells, and that looks better with equal amounts of black showing. PM incoming.... Quote
troopermaster Posted September 25, 2013 Report Posted September 25, 2013 the CRL does specify a half inch gap. The CRL needs changing. A lot of troopers are over weight these days and a bit of a gap at the sides of your armour should not jeopardise an application. Adding ugly shims to great armour is an insult. There are no shims on screen so why on earth would anyone insist of having them on a screen accurate replica costume? Ban shins. Seriously! Quote
Locitus[Admin] Posted September 26, 2013 Report Posted September 26, 2013 I'm inclined to agree with Paul on the shims unless we're talking massive gaps. But in those cases, maybe a TK isn't the right costume for you anyway. Quote
longboard8 Posted September 26, 2013 Report Posted September 26, 2013 I believe it has been said that body habitus shouldn't exclude one from clearance. Sent from my SGH-T989 using Tapatalk 2 Quote
Locitus[Admin] Posted September 26, 2013 Report Posted September 26, 2013 I believe it has been said that body habitus shouldn't exclude one from clearance. Sent from my SGH-T989 using Tapatalk 2 It doesn't. But you might look funny with a body like a ball when it should be a stick. Quote
SorenM[TK] Posted September 26, 2013 Author Report Posted September 26, 2013 The CRL needs changing. A lot of troopers are over weight these days and a bit of a gap at the sides of your armour should not jeopardise an application. Adding ugly shims to great armour is an insult. There are no shims on screen so why on earth would anyone insist of having them on a screen accurate replica costume? Ban shins. Seriously! Cheers for your input Paul:-)...and I agree :-) Quote
SorenM[TK] Posted September 26, 2013 Author Report Posted September 26, 2013 I'm inclined to agree with Paul on the shims unless we're talking massive gaps. But in those cases, maybe a TK isn't the right costume for you anyway. I totally agree with you :-) Quote
FunkyTrigger[TK] Posted September 26, 2013 Report Posted September 26, 2013 Let's see your completed mods finished pics for final review. As mentioned before, each application is unique. Quote
SorenM[TK] Posted September 27, 2013 Author Report Posted September 27, 2013 Let's see your completed mods finished pics for final review. As mentioned before, each application is unique. Roger , I will post something when I get back home next month.:-) Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.