DizzyStormtrooper[501st] Posted August 25, 2013 Report Posted August 25, 2013 you will need: -mic tips -metal screen material -scissors -superglue (optional) -highlighter or dry erase marker 1. Cut mesh into circle a little bigger than the size of a nickel (this is so it stretches and doesnt fold) 2. Sandwich the mesh between mic tip and upside-down highlighter/marker cap like this 3. Push down slowly and evenly you can see what i did here 4. trim the excess. this is so it goes in evenly and you dont end up mashing it down 5. pull now-bent screen out and flip it over. you can put a bit of glue around the inside, id recommend so it wont fall out. when installing i like to use an exacto knife to evenly push in the screen from the sides do the same with the other one and there you go! 2 Quote
DizzyStormtrooper[501st] Posted August 25, 2013 Author Report Posted August 25, 2013 Couldn't have done it without your mesh gaz thanks again! Quote
89Batman[TK] Posted August 25, 2013 Report Posted August 25, 2013 Wow simple and very effective. Makes it much easier thanks. Sent from my GT-I9100 using Tapatalk 2 Quote
ZacMuleer[TK] Posted August 27, 2013 Report Posted August 27, 2013 *bangs head against desk* Brilliant and simple solution. Nice job - and thanks. Quote
RampantLion[TK] Posted February 20, 2014 Report Posted February 20, 2014 This worked beautifully. Thanks! Quote
Cantina Security[501st] Posted February 20, 2014 Report Posted February 20, 2014 (edited) Is this regular metal screen, or a synthetic fabric type mesh? Edit* Ok, I see that you stated metal. Fantastic idea. Edited February 20, 2014 by Cantina Security Quote
Griffin-X[TK] Posted February 20, 2014 Report Posted February 20, 2014 Great idea and tutorial. Quote
DizzyStormtrooper[501st] Posted February 20, 2014 Author Report Posted February 20, 2014 i got mine from gazmosis. it's not weaved so it doesn't come apart or anything. he said its for making mountains for model trains or something Quote
TK-66929[TK] Posted March 19, 2015 Report Posted March 19, 2015 I like this... Just in case I need replacements... And I'm not sure where it's at and all but I'm having BIG problem on getting my aerators / hovi tips in properly, or where IT LOOKS RIGHT !!! I'm still looking but this is good JUST IN CASE I need to redo them. Dan Quote
Joenjevo8 Posted October 20, 2017 Report Posted October 20, 2017 Can't see anything but numbers.... you have a video? Quote
Triple D[TK] Posted October 20, 2017 Report Posted October 20, 2017 Great! Thanks for the tutorial for all. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.