Cover Strip/Shim Help

[xeonmainframe[TK]]

ok am having an issue i'm on the heavier side and i need to know what to do with the thigh armor. i know to keep the front as accurate as possible but it leaves a large gap i will have to shim in back. however the shin armor fits perfect any ideas on what would be allowable for the back of the thighs  gap is like  4.5in to 6in at the top  and 1.5in to 3in on the bottom ridge to ridge

[Raintrooper]

Check out this build thread.  Specifically the bottom photo on Page 3.  Hope it helps! 

 

http://www.whitearmor.net/forum/topic/22285-quixotic5891s-anh-stunt-build-ata/page-3

[gmrhodes13[Staff]]

Jason pointed you in the right direction, I have seen quite large back shims on legs and arms, try to keep your front shims the normal size and modify the rear

[xeonmainframe[TK]]

would i be able to get EIB having to do this

[xeonmainframe[TK]]

thanks guys that helped a lot, this is the exact issue i was having.

now as far as my other cover strips go as long as they loog the part i should be good correct

[gmrhodes13[Staff]]

Yes larger rear cover strips are aceptable for EIB and Centurion

[xeonmainframe[TK]]

Yes larger rear cover strips are aceptable for EIB and Centurion

thanks a ton man