Rawgee Posted November 30, 2013 Report Posted November 30, 2013 (edited) Hi Redforce, i am waiting for my NE armor to arrive hopefully next week! I will be using your post as reference that's for sure, its a very nice build and very inspiring as this will be my first try at this kind of project! I was wondering if you could list what was not included in the box, so i can start gathering everything i need to do the build! If you want to you can also add the tools you used that would be useful as well. Thanks Martin. Edited November 30, 2013 by Rawgee Quote
Redforce[TK] Posted December 1, 2013 Author Report Posted December 1, 2013 OK. Here you go.....this is what I used and bought for the build of/for the body armor (I did not build/use an NE helmet) Things you need to complete build (stuff that doesn't come with kit) canvas belt holster under-suit thigh garter gloves neck seal blaster boots Paint for AB buttons Materials I used that didn't come with kit dritz heavy duty snaps black elastic (for inner snap system) white elastic (for chest-back plate connection and shin rear connection) bra hooks/eye loops (rear shin connection) Black webbing (I cut into pieces for snap plates/connection on inside of armor) These are the tools I used curved scissors (trim armor) precision knives/cutters (trim armor - cut finishing strips) sand paper (smooth out armor after trim) E6000 - (A MUST OVER ANY GLUE) - don't use the ABS paste that comes with kit Metric ruler (measure finishing strips and ammo belts cuts) painters tape (tape armor pieces together to eye up during trimming and to try on before gluing during build) earth magnets (needed for gluing armor pieces that go deep mid wise (spots a clamp won't reach) clamps (needed for gluing) soldering iron leather hole puncher Dritz snap pliers needle nose pliers 1 Quote
Rawgee Posted December 1, 2013 Report Posted December 1, 2013 (edited) Thanks a lot Red, i'm pretty sure this will help others as well! I'll probably go shopping today because from what I see on the tracking USPS site, my package won't take years to arrive! Thanks again! Edited December 1, 2013 by Rawgee Quote
Batphobic Posted January 18, 2014 Report Posted January 18, 2014 Hey all - I'm considering using this armor for my first build... and I keep seeing people say that this armor is good for the bigger guys. I'm 5'9" and 160lbs. Will I run into problems with this armor? I know I can trim but that should do it, right? Quote
Rawgee Posted January 24, 2014 Report Posted January 24, 2014 If you are very skinny, thighs and biceps might be the biggest challenge, I suggest buying another helmet though... The one that come with this kit is in 3 pieces, the ears are a big problem as well... Check out my build http://www.whitearmor.net/forum/topic/25853-big-brown-box-has-arrived/ I am 5'10" 180 pds... Just keep in mind it is a big kit that will need a lot of fitting... Other than that I highly recommend it, it's nice and very glossy and cheap... Good luck Quote
Batphobic Posted January 24, 2014 Report Posted January 24, 2014 If you are very skinny, thighs and biceps might be the biggest challenge, I suggest buying another helmet though... The one that come with this kit is in 3 pieces, the ears are a big problem as well... Check out my build http://www.whitearmor.net/forum/topic/25853-big-brown-box-has-arrived/ I am 5'10" 180 pds... Just keep in mind it is a big kit that will need a lot of fitting... Other than that I highly recommend it, it's nice and very glossy and cheap... Good luck Thanks Rawgee - great build thread. I'll definitely refer to that often once mine arrives. And yeah, I ended up going with an ATA helmet. Hopefully will dive into starting to cut this weekend. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.