Daetrin[Admin] Posted December 28, 2007 Report Posted December 28, 2007 Thanks Doug I just checked mine against those numbers but didn't bother with the crest measurements as I would be guessing where to start measuring TM: Base: 29.5" (measured just above brow trim) Ear to ear: 14 1/4" TE2: base 30" (measured just above brown trim) You guys got of pix of where exactly you are taking these other measurements? Quote
troopermaster Posted December 29, 2007 Report Posted December 29, 2007 TE2: base 30" (measured just above brown trim) That's interesting. The measurements I was given of the TE without the brow trim on and measured at the lowest point of the dome was 29". How come the TE2 is bigger? Quote
Daetrin[Admin] Posted December 29, 2007 Report Posted December 29, 2007 Perhaps the pull? I have two - will measure both & post pix today. Quote
troopermaster Posted December 29, 2007 Report Posted December 29, 2007 (edited) The sharpness/softness wouldn't make any difference to the overall size of the dome. Here is the pic I was sent a while back showing where the 29" measurement was taken from. As you can see, it is at the very lowest point of the dome without going onto the back plate or over the brow trim. Edited February 17, 2021 by gmrhodes13 photos updated gmrhodes13 2021 Quote
Star Wars Helmets Posted December 31, 2007 Report Posted December 31, 2007 Same address as what Jez....the armour? I am not sure what you meant by that comment Soprry mate didnt mean to be bvague. I meant that I thought that AP helmets (and armour) were shipped from the same phyical address as GF used to use (in Canada). Maybe this was just during the handover Cheers Jez Quote
dougefresh Posted December 31, 2007 Author Report Posted December 31, 2007 Soprry mate didnt mean to be bvague. I meant that I thought that AP helmets (and armour) were shipped from the same phyical address as GF used to use (in Canada). Maybe this was just during the handover Cheers Jez It's entirely possible-- my AP was shipped from Montreal. Quote
Daetrin[Admin] Posted January 5, 2008 Report Posted January 5, 2008 I measured it again and still get 30". I measured the other TE2 I have and the measurement is identical. Any other measurements you want done? Seeing the line helps. Quote
kiyotei[TK] Posted January 5, 2008 Report Posted January 5, 2008 Paul we definitely need another "bringing of the helmets" party so we can do pics and measurements. I'm still mad that my pic of all the helmets came out blurry. Quote
Altess Posted January 5, 2008 Report Posted January 5, 2008 It would be so helpful to see the helmets together (front and side pics). It would help me to understand the differences in the helmets. Thanks Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.