TD clasps for non ABS belts

[Exodus[TK]]

I'll give the banker's clasp idea a try

 

[bobby fletcher]

thats how mine is set up

[Exodus[TK]]

Good to know, if I have problems I will ping you

[bobby fletcher]

the only problem i see is its to wide it needs to be tighter so it holds on to your belt better

[troopermaster]

I made my own clips from 1" flat aluminium bar.Very simple to make,just bend a piece around you canister and leave a 3" flat spot to clip onto you belt.

[TK4205]

sweet idea. When I get deployed I'll give that a try.

[Ruf Terrain[TK]]

Little late on this topic but I will post anyway.

 

I used these. They are the right size for the belt. I had to flatten the bottom below the clip out with a ball-peen hammer. The holster clips are much wider and more accurate than the thin Banker's Clips.

http://www.tandyleather.com/products.asp?number=1239-00

 

I guess you could just slide them on the belt but I attached mine permanently.

http://www.dagobahswamp.com/projects/stormtrooper/belt.asp

[mjrose927[TK]]

Am I missing where the type of screw required is listed?

[TheSwede[TK]]

1 hour ago, mjrose927 said:

Am I missing where the type of screw required is listed?

It’s in the CRL

OPTIONAL Level two certification (if applicable):

• Clips shall be attached with slotted, pan head style screws, and be black (two per clip).

[mjrose927[TK]]

1 hour ago, TheSwede said:

It’s in the CRL

OPTIONAL Level two certification (if applicable):

• Clips shall be attached with slotted, pan head style screws, and be black (two per clip).

I meant size of the specific screw.  I think I may have stumbled into it looking for something else.  Thanks.

[troopermaster]

M3 black pan head slotted machine screws.