wolfgar Posted September 13, 2012 Report Posted September 13, 2012 (edited) Name: Joe Coleman ID: TK5733 Forum Name: wolfgar Armour: ATA Helmet: ATA Blaster: DoopyDoos resin Height: 6'3" Weight: 195 lbs. Boots: TK Boots Belt: off-white canvas; Local maker Gloves/hand plates: Nomex gloves, ATA plates Electronics: i-Comm and Aker amp Neck seal: Darman, local maker Undersuit: two part; reebok top and bottoms Holster: Darman, local maker belt wasn't tightened all the way on the full-body shots so you could see a seperate butt-plate. picture with tape measure shows left side gap once belt is fully tightened. Edited September 13, 2012 by wolfgar Quote
Darth Hilarious Posted September 13, 2012 Report Posted September 13, 2012 Looks better than mine! Quote
wolfgar Posted September 13, 2012 Author Report Posted September 13, 2012 (edited) Edit: Kyle forgot to log out of my account and into his...so he commented on my pics as me. Haha! Winning! Edited September 13, 2012 by wolfgar Quote
sidious1 Posted September 13, 2012 Report Posted September 13, 2012 Shut your face. I did nothing of the sort. This guy deserves EIB for his ego alone, commenting on how awesome his armor is. J/k. Great job. Looks like an easy win for the ranks of the EIB elite. Quote
Mogwai[TK] Posted September 13, 2012 Report Posted September 13, 2012 Looks good so far, great Job! But you need to lift the Biceps. Did you connect them to the Shoulders? For a better look, i know it is not required for EIB, I would take of the Return Edge on your Forearms. And I think you don`t have the right Gloves, but lets see what Mathias is saying! Quote
wolfgar Posted September 13, 2012 Author Report Posted September 13, 2012 Looks good so far, great Job! But you need to lift the Biceps. Did you connect them to the Shoulders? For a better look, i know it is not required for EIB, I would take of the Return Edge on your Forearms. And I think you don`t have the right Gloves, but lets see what Mathias is saying! Thanks for the input, mogwai! I do have webbing that snaps to connect my biceps and my shoulder bells but i didn't attach them for these photos bc we were in a hurry take the pics the rush to make a meeting regarding a charity event we're putting together. Are you referring to the return edge that's usually on the front of the forearm? ATA kits dont have them so I'm a bit confused there? The gloves are the nomex flight gloves that about half my squad wears, but if theres a better option out there for the EIB level short of the step-up to centurion rubbers let me know. I'm all in! Looking forward to hearing from everyone else! Quote
bjsavage7[TK] Posted September 13, 2012 Report Posted September 13, 2012 Biceps are fine, gloves are fine. The rubber ones are for centurion A bit of the brown part of your suspenders is showing. The 3rd ear screw at the base of the helmet doesn't look right. It looks like a philips head, not a flat head. Armor & weapon look great. All other detals look fine to me. I believe you need a bucket-off pic. Quote
wolfgar Posted September 13, 2012 Author Report Posted September 13, 2012 (edited) Biceps are fine, gloves are fine. The rubber ones are for centurion A bit of the brown part of your suspenders is showing. The 3rd ear screw at the base of the helmet doesn't look right. It looks like a philips head, not a flat head. Armor & weapon look great. All other detals look fine to me. I believe you need a bucket-off pic. Yeah, i noticed the suspender part too, im going to use leather dye on it...as a stop gap i've already used sharpie on it. The third ear screw is a phillips! I never knew it needed to be flathead! i can update that easy peezy. Hows this for a bucket off? Lol Edited September 13, 2012 by wolfgar Quote
Locitus[Admin] Posted September 13, 2012 Report Posted September 13, 2012 The return edge at the bottom of the chest is on the large side. Half would be enough. And you should replace the bottom ear screws and paint them. But other than that I don't have any comments for this level. Approved! Quote
wolfgar Posted September 13, 2012 Author Report Posted September 13, 2012 The return edge at the bottom of the chest is on the large side. Half would be enough. And you should replace the bottom ear screws and paint them. But other than that I don't have any comments for this level. Approved! Thanks for the input! We have an armor party coming up and i plan to put them all To good use! Quote
Locitus[Admin] Posted September 13, 2012 Report Posted September 13, 2012 Also make sure to get an elastic across the bottom of the shoulder bell if you haven't already. It will keep it from flapping around. Quote
matt black Posted September 13, 2012 Report Posted September 13, 2012 Well done but we need an action shot so you can be processed. Quote
flashpoint0214[TK] Posted September 13, 2012 Report Posted September 13, 2012 Congrats! Lets keep um coming! Quote
wolfgar Posted September 14, 2012 Author Report Posted September 14, 2012 Well done but we need an action shot so you can be processed. Matt, This is the best i've got on my phone. Its an older one, but hopefully it works. Quote
bjsavage7[TK] Posted September 14, 2012 Report Posted September 14, 2012 Congrats! Lets keep um coming! We've got a few more Squad 7 troopers lined up! Look for their threads to pop up soon. Quote
captsafe66[Admin] Posted September 14, 2012 Report Posted September 14, 2012 Congrats Trooper!! Quote
Darth Hilarious Posted September 16, 2012 Report Posted September 16, 2012 This is the best i've got on my phone. Its an older one, but hopefully it works. "It's an older code sir, but it checks out." Just fy casual... Congrats! Quote
Dazauto[TK] Posted September 16, 2012 Report Posted September 16, 2012 Congrats on your EIB, well done trooper Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.