captsafe66[Admin] Posted August 4, 2012 Report Posted August 4, 2012 I just finished this last night. I replaced the front allen screws, rebuilt the sight, made the cocking lever functional and put lenses in the scope. My progress pics didn't turn out though... What do you think?? Quote
bobojuice Posted August 4, 2012 Report Posted August 4, 2012 I can't really tell from the pics. I'll pm you with my address so I can take a closer look. Quote
Geaux Saints[TK] Posted August 4, 2012 Report Posted August 4, 2012 Fantastic! Curious, what is the paint scheme for the E-11? Quote
captsafe66[Admin] Posted August 4, 2012 Author Report Posted August 4, 2012 I prime it with plastic primer, give the body of the blaster a good coat of silver, and the scope was undercoated in gold. This one, I gave it a coat of hammered black and finally coated the entire blaster with flat black. After it cured a day, I scuffed it good with scotch brite pads and scratched it with and exacto knife. Also, for a better showing of the undercoats, I masked off areas and lightly dusted with gold and silver again. I let that flash a bit and unmasked the entire blaster, then dusted the whole thing again with flat black. Next day, I lightly scuffed the blaster with scotch brite again. I also highlighted the lettering on the scope with white. Quote
captsafe66[Admin] Posted August 5, 2012 Author Report Posted August 5, 2012 Took it to its first Troop yesterday, everyone loved it!! Quote
Geaux Saints[TK] Posted August 6, 2012 Report Posted August 6, 2012 I prime it with plastic primer, give the body of the blaster a good coat of silver, and the scope was undercoated in gold. This one, I gave it a coat of hammered black and finally coated the entire blaster with flat black. After it cured a day, I scuffed it good with scotch brite pads and scratched it with and exacto knife. Also, for a better showing of the undercoats, I masked off areas and lightly dusted with gold and silver again. I let that flash a bit and unmasked the entire blaster, then dusted the whole thing again with flat black. Next day, I lightly scuffed the blaster with scotch brite again. I also highlighted the lettering on the scope with white. Thanks. Great job! It looks very nice! Quote
Geaux Saints[TK] Posted August 6, 2012 Report Posted August 6, 2012 What did you use for the spring? Quote
captsafe66[Admin] Posted August 6, 2012 Author Report Posted August 6, 2012 There are 2 springs I found at a Truvalue Hardware store, they have spring assortments. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.