Jump to content

Recommended Posts

Posted

Hello everyone I was wondering if i need to get some of those rare earth magnets before i start assembling my armor? I already have some clamps to hold the ends. Just asking because this is my first suit.

Posted

It's a good idea. It's cheap and saves you on a ton of clamps. Get some that are maybe ½ inch or bigger and as strong N-rating as you can. Just be careful, they can pinch you really bad.

Posted

Hi Gary,

Yes you should get some as they come in very handy. The clamps are good for holding the end of the strips and the magnets are good for holding down along the length. They are also good to hold the helmet together so you can see how you want to assemble it before drilling.

 

Edit - Mathias beat me to it again :P

Posted

Yes, they are very handy. But be carefull with them as they can pinch as previously stated and they will chip or break completely if you let them come together to hard.

 

Chris

Posted

I found some who where not suited for kids under the age of 7, guess they are quite strong? Here

Posted

Put duct tape on one side of them too, they may scratch.

Posted

I was trying to stay out of this but since I got pinched AND IT DREW BLOOD last weekend... they literally flew from two sides of the table... I wouldn't let any of these magnets near anyone under the age of 38.

  • 2 months later...
Posted

LOL! I didn't expext an answer to that! We need to send this link to certain trolls!

 

Just wanting to get a smile out of you. ;):duim:

Posted

You did! Thank you! What's your drink? ;)

 

Too bad I cant help you with your question

 

You're welcome!

 

Whatever you're serving. ;)

Posted

The magnets are good for the middle sections of long pieces. I would get at least 10, 1/2in or bigger, N52 is the strongest rating. Clamps can't reach into the middle of your thighs, forearms, shins and so on. Magnets are also great for holding snap strips/webbing on.

Posted

Any good place to buy them?

 

Just a thought....to save on the amount of magnets used on each piece of armor, would it be feasible to put some sort of strip of metal opposite to magnets for them to pull on instead of magnet to magnet?

Posted

Actually, this time ebay is helpful.

 

But why use a metal strip? You'll use half of the force (no pun!). Now, that I learned how magnets work. ;)

 

Just trying to think outside of the box. I've noticed that depending on how many magnets you have, you would be limited to how many pieces you could glue at once. Like I said, just a thought....I'm a noob.

Posted

The magnets are good for the middle sections of long pieces. I would get at least 10, 1/2in or bigger, N52 is the strongest rating. Clamps can't reach into the middle of your thighs, forearms, shins and so on. Magnets are also great for holding snap strips/webbing on.

 

How much pull force should the magnets have, minimum?

Posted

I wouldn't bother getting weaker than N45. It would probably still work, but there's no reason to skimp out on it.

  • 1 month later...
Posted

I was trying to stay out of this but since I got pinched AND IT DREW BLOOD last weekend... they literally flew from two sides of the table... I wouldn't let any of these magnets near anyone under the age of 38.

 

lol Ingrid, I don't know how many old threads I have looked through as research and seen comments like this from you. Hilarious. :laugh1:

Posted

They bit me too, literally right when I took them out of the box. First thing I got from them was a good sized blood blister.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...