Jump to content

Recommended Posts

Posted

I have a Hyperfirm E-11, and I'd like to add a D Ring to it.

 

I ordered a D Ring from Trooperbay, but the ring is a closed loop, and it looks like it would be difficult to attach to the Hyperfirm. Has anyone here done this mod, and can you share some insight on how to do it?

 

I was thinking I'd just drill a hole straight through the rubber block on the back and thread both ends of th e D Ring through, but this one from Trooperbay is solid, and unmaleable.

 

Any thoughts?

Posted

I cut off about 1/4" off the straight side of the d-ring, drilled through the end cap of the hyperfirm and worked the ring through it.

Posted

I used a 1/16" drill bit to drill through the end cap. Then I used 2 pliers and bent the D-ring so I could slide it into the hole I drilled. Then, bend back with the pair of pliers. DONE

Posted

I used a 1/16" drill bit to drill through the end cap. Then I used 2 pliers and bent the D-ring so I could slide it into the hole I drilled. Then, bend back with the pair of pliers. DONE

 

This is exactly how I did mine.

  • 1 year later...
Posted

I found a 1/16" drill bit a bit - heh, get it - too small. 7/64" worked perfectly for me. Not too big that it moves around but not too small that i was struggling to get it through. 

  • 1 month later...
  • 1 year later...
Posted

Very nice! Thank you!I have been wondering how to put that on with destroying it.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...