sskunky Posted September 13, 2015 Report Posted September 13, 2015 Totally a noob but also I've never built anything in my life that required more than an allen wrench... If you guys could brief me quickly on what materials are considered good and which are not when picking out these kits, I would be terribly grateful. Also I am a woman and 5'4 and am wondering who would be someone to turn to for an armor that would fit me since most I've come across are generally men and 5'9 + Thanks in advance guys! I have had smaller women successfully fit my armour. Personally if you are concerned about materal then ABS is the best as it's more flexible than HIPS. YOU WILL NEED: Stanley blade or Exacto knife Ratchet clamps Sanding block Lex an scissors Magnets to clamp parts the clamps won't reach. Glue of your choice. I use liquid solvent as I find it's quick and clean and very strong. Elastic for strapping Velcro Seeing machine Paints Brushes Rivet gun and rivets Poppers and setting tool It's a good idea if you have anyone local to get together with to help from your local garrison etc. as it's a little daunting starting out. Cheers! And good luck! Quote
trinity5614 Posted September 14, 2015 Report Posted September 14, 2015 Loving all the information found on this forum. Its just hard to take it all in. New guy here and wanting to join the Legion. 5' 11" 185 pounds. I have been looking at RS mainly because they have a web site. Any other suggestions? I am wanting to purchase a near complete set custom sized. I build other costume props and costumes but would rather just buy a Trooper set so that I can volunteer. I love the charity work that this organization does. Thanks in advance for your help. 1 Quote
Jinsei[TK] Posted December 18, 2015 Report Posted December 18, 2015 (edited) Well was just taking a look as a new garrison member bought a kit off of TKArmour.com, the kit piece photo's are EXACTLY the same as the photos off Stormtrooper City. Are they the same company? If they are seems like they are just widening their net in attempt to snag unwary buyers. If they aren't the same company both are claiming that they make their own amour from their own molds...... TKArmour http://tkarmour.com/ Edited July 29, 2021 by gmrhodes13 link not working removed Quote
TK Goatee[TK] Posted December 18, 2015 Report Posted December 18, 2015 Looks like fx armor to me. Quote
Jinsei[TK] Posted December 18, 2015 Report Posted December 18, 2015 Yeah, I think it's been brought up a lot that it's FX recast. Just found it funny that they both have the same photo's and Stormtrooper City was attempting to get added to the "vetted" sellers list a month or so ago. Quote
mauvia[TK] Posted December 19, 2015 Report Posted December 19, 2015 Hi everyone, Im ne here, and after several days of searching the internet and trhough the fora pages, it is clear to me where is should NOT go, but it is still not clear to me where i DO neet to go, to get a 501 approved suit. further, since it will be my 1st suit, i tend to go for a TFA-trooper.. http://www.anovos.com/products/star-wars-first-order-stormtrooper-helmet-accessory-standard-line-pre-order any good?? please can anyone comment me on how i should go from here, befor i wast too much money on parts i need to rplace. gr pim mauve pim.mauve@delixl.nl Quote
Guest Troopdaddy Posted December 20, 2015 Report Posted December 20, 2015 I'm new here and I'm very glade I read this. Thanks Quote
Jinsei[TK] Posted December 21, 2015 Report Posted December 21, 2015 There is a thread in this section of the form that has a list of vetted sellers. That Anovos kit that you linked hasn't come out yet and no one has seen what the end product is. There is also a thread about the Anovos kit under the "Hard Armor Section" here on FISD. I would link the two but for some reason it's not working out. Quote
BrinkHouse Posted December 23, 2015 Report Posted December 23, 2015 I'd like to think I'm a pretty crafty and resourceful individual, and I'm wondering, with mods and changes made, if the EFX ANH helmet is an okay investment, at least for the short term? I was thinking of getting on a waiting list for ATA or RT-Mods for one of their helmets but would be good to have something in the mean time, even if it means I have to modify it/fix some things like fill the seam under frown, add screws to ears, raise brow, replace lenses, etc. Thoughts? Quote
Optimasatin Posted December 26, 2015 Report Posted December 26, 2015 I am deciding between WTF and RS for a trooper armor kit...... any opinions?? Quote
TeaJay[501st] Posted April 19, 2016 Report Posted April 19, 2016 I am deciding between WTF and RS for a trooper armor kit...... any opinions?? I recently picked up a WTF kit. He's got great customer support and has a fairly quick turn around time. I should be receiving my kit in the middle of May. Quote
The Scorpion Posted July 12, 2016 Report Posted July 12, 2016 (edited) Is the vendor CostumesCk (CK) on etsy.com ok? They sell Stormtrooper armor as well as Biker Scout stuff. Are they reliable? esty Edited July 29, 2021 by gmrhodes13 link not working removed Quote
gmrhodes13[Staff] Posted July 12, 2016 Report Posted July 12, 2016 (edited) On 7/12/2016 at 1:11 PM, The Scorpion said: Is the vendor CostumesCk (CK) on etsy.com ok? They sell Stormtrooper armor as well as Biker Scout stuff. Are they reliable? esty Check out the getting started section, here is a good start http://www.whitearmor.net/forum/topic/11538-the-various-types-of-armor-and-where-to-find-them/ Edited July 29, 2021 by gmrhodes13 link not working removed Quote
The Scorpion Posted July 12, 2016 Report Posted July 12, 2016 (edited) I ordered a ANOVOS kit. I just wanted to know about these guys.<br><br> I did more research and they seem to be using similar pictures as Corsairs-kids. So, they are Corsairs-kids? I don't know, so I am asking. Edited July 12, 2016 by The Scorpion Quote
Locitus[Admin] Posted July 12, 2016 Report Posted July 12, 2016 I ordered a ANOVOS kit. I just wanted to know about these guys.<br><br> I did more research and they seem to be using similar pictures as Corsairs-kids. So, they are Corsairs-kids? I don't know, so I am asking. Not at all. Different entities. Quote
The Scorpion Posted July 29, 2016 Report Posted July 29, 2016 (edited) Are they bad? I was considering getting accessories from them. Edited July 29, 2016 by The Scorpion Quote
Locitus[Admin] Posted July 30, 2016 Report Posted July 30, 2016 Are they bad? I was considering getting accessories from them. Anovos is pretty good yes. Quote
cnsf Posted August 11, 2016 Report Posted August 11, 2016 I have the same question about Anovos. Everything in their catalog seems to be "Pre-Order" and they have an "F" rating on BBB. Are these guys legit or am I creating a hassle for myself if I order a helmet from them? I am thinking of getting the standard TFA Stormtrooper helmet and starting my first armor build. It seems like a good deal and everything I read says this would be 501st approved. The reviews of the business and their "pre-order" issue make me wary. Quote
Phant25 Posted September 17, 2016 Report Posted September 17, 2016 Hi All ,want to start trooping and had some great feedback from people in here..considering SDS Stunt basically as its preassembled and trimmed , i know it will need some work to make it 501st cleared, I don't have the skills to trim and put a kit together.. What are your thoughts on SDS ..I know some of you have the kit is it OK . Ta sent from my Mobile Quote
starsaber25[Admin] Posted September 18, 2016 Report Posted September 18, 2016 Hi Asif. I would have to urge you to look elsewhere. You say yourself that you are worried about your skills to trim and put a kit together. You also say that you know an SDS kit would need to have modifications done to make it 501st approved which is absolutely true. So why wouldn't you look into RS props or Troopermaster since you are in the UK? Both are far superior kits and both can come assembled and would most likely be 501st approvable upon arrival. Quote
themaninthesuitcase[Admin] Posted September 18, 2016 Report Posted September 18, 2016 Hi All ,want to start trooping and had some great feedback from people in here..considering SDS Stunt basically as its preassembled and trimmed , i know it will need some work to make it 501st cleared, I don't have the skills to trim and put a kit together.. What are your thoughts on SDS ..I know some of you have the kit is it OK . Ta sent from my Mobile I'll echo the stay away from SDS, there's many reasons but ultimately there's better options, and not just the two already mentioned. I'd suggest popping over to the UK Garrison and posting in our forums. The armourer team will be able to point you in the right direction for you're needs and budget. Chris. Quote
Phant25 Posted September 18, 2016 Report Posted September 18, 2016 Thanks both , has anyone had experience with TK suppliers of Armour (stormtrooper heavn) they can supply a full kit.? At a reasonable price . Appreciate the feedback. sent from my Mobile Quote
themaninthesuitcase[Admin] Posted September 19, 2016 Report Posted September 19, 2016 Thanks both , has anyone had experience with TK suppliers of Armour (stormtrooper heavn) they can supply a full kit.? At a reasonable price . Appreciate the feedback. sent from my Mobile Chances are if you found them via google it's not what you want. There's a couple of excptions but not many. I really do recommend you speak to the Armourer team or send me a PM. Chris. 1 Quote
UKUTE Posted September 19, 2016 Report Posted September 19, 2016 I can vouch for Mark at AP. His service has been stellar. Great help. Sent from my SM-N920T using Tapatalk 3 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.