darthmaul101079[TK] Posted February 11, 2012 Report Posted February 11, 2012 (edited) Placeholder, Pics did not upload correctly Edited February 11, 2012 by darthmaul101079 Quote
darthmaul101079[TK] Posted February 11, 2012 Author Report Posted February 11, 2012 Name:Todd Lechniak Armor: ATA Bucket: ATA Height: 6 ft. 1 in. Weight: 210 Boots: TKBoots Canvas Belt: Home made Hand Plates: Trooperbay Electronics: None yet Neck Seal: Home Made Blaster: DoopyDoo's full kit Holster: Converted from old FX kit. The first thing that may be noticable is that when my wife put on my thermal det, she knocked off center my kidney plate. I noticed it when i previewed the pics and took my armor off. I hope that will not jepordize my chances. Also, I may have to put up my pics in seperate posts. It has the required size, but just a pic is over 200 KB Quote
darthmaul101079[TK] Posted February 11, 2012 Author Report Posted February 11, 2012 (edited) OK, I am having 110% difficulty in posting my pics. Edited February 11, 2012 by darthmaul101079 Quote
seantrooper[TK] Posted February 12, 2012 Report Posted February 12, 2012 (edited) Upload them to Photobucket or something similar and insert the img link into your post Edited February 12, 2012 by seantrooper Quote
darthmaul101079[TK] Posted February 12, 2012 Author Report Posted February 12, 2012 Name:Todd Lechniak Armor: ATA Bucket: ATA Height: 6 ft. 1 in. Weight: 210 Boots: TKBoots Canvas Belt: Home made Hand Plates: Trooperbay Electronics: None yet Neck Seal: Home Made Blaster: DoopyDoo's full kit Holster: Converted from old FX kit. The first thing that may be noticable is that when my wife put on my thermal det, she knocked off center my kidney plate. I noticed it when i previewed the pics and took my armor off. Quote
Daetrin[Admin] Posted February 12, 2012 Report Posted February 12, 2012 I think you are close - really darn close. Here are three things I noticed: 1) The elastic tie downs on the shoulder straps are too wide - they should only be a 1/8" or so - about the width of a shoe lace. Should be an easy fix. 2) The power pack on the right thigh should be rounded on the bottom - you can see this on the other EI request thread. Also should be a quick fix. 3) What may not be a quick fix is the shins. They almost look like they are on the wrong legs, and in either event it would be good to see how the shims are done so they are clean. The shims on the thighs look great - overall a nice and well done fitting it to your body. Lastly - I think I have the same wedding band. Reminds me to get my wife's name on there so it's clear who owns me. ;-) Quote
captsafe66[Admin] Posted February 12, 2012 Report Posted February 12, 2012 Looks great!! I had the same problem with my shins. Here is a link that Mason sent me to repair them: http://forum.whitearmor.net/index.php?showtopic=16608 Good luck! Quote
Darth Aloha[Admin] Posted February 14, 2012 Report Posted February 14, 2012 You look great in that there ATA, especially being a tall guy. Nicely done. What is your waist and chest size if you don't mind me asking? I can't quite see in the photos if you have elastic around your biceps attached to the shoulder bells. It might just be lost in the black of your under suit. Aloha and good luck -Eric Quote
darthmaul101079[TK] Posted February 16, 2012 Author Report Posted February 16, 2012 You look great in that there ATA, especially being a tall guy. Nicely done. What is your waist and chest size if you don't mind me asking? I can't quite see in the photos if you have elastic around your biceps attached to the shoulder bells. It might just be lost in the black of your under suit. Aloha and good luck -Eric Thanks Eric, My waist size is about a 36, my chest i'm not really sure. I do have black bands around the bicepts attached to the bells. I just had to move everythinbg to get proportional. Quote
darthmaul101079[TK] Posted February 17, 2012 Author Report Posted February 17, 2012 I would like to re-submit photos of what needed to be corrected. First photo is that I made corrections to the clafs as per recomendations. I had no trouble prying off the E-6000 for the sniper plate. You just need to know how to work and sweet talk E-6000. Second two pics are the power pack on the thigh. I rounded off the bottom edges more, again per the recomendations. Lastly, I got smaller elastic bands for the sholder straps. I hope all is adaquate. Quote
darthmaul101079[TK] Posted February 18, 2012 Author Report Posted February 18, 2012 I submitted the corrections, Do I need to make a brand new topic? Quote
Darth Aloha[Admin] Posted February 18, 2012 Report Posted February 18, 2012 I submitted the corrections, Do I need to make a brand new topic? No need for a new topic. Just patience while Mason tries to catch up on things Aloha, -Eric Quote
dashrazor Posted February 18, 2012 Report Posted February 18, 2012 sorry, i didn't get this one by email it looks like you made all the necessary fixes and in good time with that you are Approved! great work trooper congrats!! Quote
Quebectrooper Posted February 19, 2012 Report Posted February 19, 2012 (edited) Shins are wrong !!! They were right the first time and you didn't need to switch em. oops. One thing i'd like to know is where is my grandmother ? Edited February 19, 2012 by Quebectrooper Quote
darthmaul101079[TK] Posted February 20, 2012 Author Report Posted February 20, 2012 Thank you very much . You shall soon hear from me for centurian . Again, thank you! Quote
Locitus[Admin] Posted February 20, 2012 Report Posted February 20, 2012 I would have to agree with Quebectrooper. I think your shins were better before. Quote
dashrazor Posted February 20, 2012 Report Posted February 20, 2012 yes, on second look i have to wonder if they were mismatched left right calf parts? and not on the wrong legs Quote
Locitus[Admin] Posted February 20, 2012 Report Posted February 20, 2012 That's what I'm thinking it is now. Looks like the inside is now on the outside. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.