Darth Aloha[Admin] Posted December 21, 2011 Report Posted December 21, 2011 I am totally bored at work and combing through the CRLs.... and feeling über nit picky... I just noticed that there are no centurion requirements for the ESB Style E-11 in the TKC CRL. The ROTJ E-11 section states: Folding stock shall be in the extended position. Hasbro blasters are not allowed, even conversions. I'm assuming this is an omission? Or is an ESB-11 not allowed at all for a centurion TKC? If it isn't allowed I suppose it should say so? Aloha, -Eric Quote
dashrazor Posted December 21, 2011 Report Posted December 21, 2011 only ROTJ with extended stock is allowed for centurion (as seen in the game) ESB is only acceptable for base 501st and EI requirements Quote
Darth Aloha[Admin] Posted December 21, 2011 Author Report Posted December 21, 2011 Gotcha. Thx! (null) Quote
Darth Aloha[Admin] Posted December 22, 2011 Author Report Posted December 22, 2011 (edited) In looking at the INC CRL... the centurion entries for the ROTJ and ANH E-11 and the SE-14R state the following: An E-11 is not allowed, only a flamethrower. For consistency sake, should the TKC CRL also explicitly state that neither the ESB E-11 nor the SE-14R are allowed for centurion? Yes... yes... yes... I am that bored and/or procrastinating. Aloha, -Eric Edited December 22, 2011 by Darth Aloha Quote
dashrazor Posted December 22, 2011 Report Posted December 22, 2011 yes that is a good point it will be updated soon! Quote
seantrooper[TK] Posted December 22, 2011 Report Posted December 22, 2011 Ahhh, now where on earth would you get such a blaster? Does anybody do kits? Quote
dashrazor Posted December 22, 2011 Report Posted December 22, 2011 (edited) well. the best way would be to get your hands on a MGC sterling replica or a deactivated C-1 sterling (canadian MP version) both are pretty pricey. alternatively you could make one from scratch here are some templates----------- or the 1.5" templates here----------- or you could use a pipe build from doopydoos or possibly even a hyper-firm and modify it to have a extended stock. you can get a real working stock from apex gun parts for 45$----------- another option would be to cut up a resin (doopy) stock and modify it to the open position Edited January 15, 2021 by gmrhodes13 link not working, removed gmrhodes13 2021 Quote
dashrazor Posted December 22, 2011 Report Posted December 22, 2011 oh, another option for a working stock is the asahi airsoft super sterling. they are pretty rare but do pop up from time to time also bear in mind that the stock dosnt need to actually function. it just needs to be in the extended position Quote
Thalizar[TK] Posted January 31, 2012 Report Posted January 31, 2012 It also states that for TKC EI the stock should be in the extended position. So for EI it needs to be extended, thought this was just for centurion. Quote
TK bondservnt[501st] Posted January 31, 2012 Report Posted January 31, 2012 just get a starkiller lightsabre and call it done. Quote
dashrazor Posted January 31, 2012 Report Posted January 31, 2012 It also states that for TKC EI the stock should be in the extended position. So for EI it needs to be extended, thought this was just for centurion. the extended stock (as seen on the game models) is only required for Centurion. it is just a "should have" or "may have" for EIB Quote
TK bondservnt[501st] Posted January 31, 2012 Report Posted January 31, 2012 would a standard L2A3 run for a centurion status if it were made up in the ROTJ fashion? but with the L2A3 stock and grips? Quote
dashrazor Posted January 31, 2012 Report Posted January 31, 2012 yes, as long as it meets all the EIB details. and for Centurion it will need all major ROTJ details. it does not need to be based on an real MGC sterling it can be Based on a real or replica (this includes resin or hyperfirm) Sterling sub-machine gun, scratch-built some ROTJ details not noted in the CRL front D-ring flat barrel muzzle proper (solid) style scope rail Quote
Krazy Ivan[TK] Posted April 15, 2012 Report Posted April 15, 2012 (edited) Just wondered if this e-11 is ok to use with my TKC. ----------- Edited January 15, 2021 by gmrhodes13 link not working, removed gmrhodes13 2021 Quote
TK bondservnt[501st] Posted April 16, 2012 Report Posted April 16, 2012 The CRL has been modified a little.. can mason chime in on this point? Quote
Thalizar[TK] Posted April 17, 2012 Report Posted April 17, 2012 (edited) You could try this place, thinking about this to build my blaster. They are a bit pricey but would make a great E-11. ------------ Edited January 15, 2021 by gmrhodes13 link not working, removed gmrhodes13 2021 Quote
dashrazor Posted April 17, 2012 Report Posted April 17, 2012 Just wondered if this e-11 is ok to use with my TKC. this would be more than fine for EIB standards , for centurion level it would only need the correct ROTJ details added. Quote
Aizenoso[TK] Posted September 26, 2021 Report Posted September 26, 2021 Excuse me for bringing back this post to life. I have been wondering aswell about if only ROTJ blaster with full extended stock was ok for TKC centurion, but recently they gave the centurion level with a ESB standard blaster. Quote
giskard8[Staff] Posted September 26, 2021 Report Posted September 26, 2021 (edited) 4 hours ago, Aizenoso said: Excuse me for bringing back this post to life. I have been wondering aswell about if only ROTJ blaster with full extended stock was ok for TKC centurion, but recently they gave the centurion level with a ESB standard blaster. ESB version is also allowed. If the said Blaster is good for your EIB application it is also passable for CNT, if the CRL did not states addition requirements for Lv.3 (in red-brown text). I think the only thing the CRL missed is: Hasbro blasters are not allowed, even conversions. Edited September 26, 2021 by giskard8 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.