Balgosa Posted December 13, 2011 Report Posted December 13, 2011 I hate having a wire running out of my helmet and can't get a mic to stay on my face without falling down, so I was wondering what people that was a good wireless mic to use with the iComm/Aker setup? Quote
TD-3425 Posted December 13, 2011 Report Posted December 13, 2011 Well the Memorex that Jim sells works, but I had some signal issues. IE, I placed the mic/transmitter in the back of my bucket and the receiver in my back piece. If I stand up straight it works. But if I move my head down, it loses signal and breaks up. At that point, I chose just to run the mic/wire down my neckpiece. But doing that I too run into the issue of the mic falling down like you. I may fiddle around with it but I think the biggest issue is that the antenna on the receiver was not extended. I'll let you know what I find out from my tests. Quote
TK_LEPER Posted December 13, 2011 Report Posted December 13, 2011 I bought one off Amazon, I think it's an olympus brand... works pretty good. Better than the wireless that I bought from Jim. :/ Sorry Jim buddy. Quote
TrooperVenger Posted December 13, 2011 Report Posted December 13, 2011 If you're having issues with the mic staying in place, use a little surgical tape and tape the wire to your face. Or you can wear a faceless balaclava and put that over the mic strap and it'll hold it in place better. Oh, you could also permanently fix the mic to the inside of your helmet and then you'd not need to worry. Remember that with a wireless mic comes the addition of another battery to worry about. Quote
tkrestonva[TK] Posted December 13, 2011 Report Posted December 13, 2011 You could go with a wireless setup, or you could simply hide the wire under the neckseal or (like Ricky said) under a balaclava. As was also said, it also means extra equipment (power, bulk, etc.). If the wired mic is falling off, perhaps you aren't giving enough slack to the cord in order to move your head freely. I also use an Aker/iComm setup, and that's the only circumstance in which I've had the mic come off my head. Quote
TD-3425 Posted December 13, 2011 Report Posted December 13, 2011 I might do the balaclava myself. The mic has a VERY flexible boom and thus it bends quite nicely, enough that it falls off my mouth all the time. I wouldn't want to do tape myself, due to skin/sweat. But balaclava would work. Quote
ZacMuleer[TK] Posted December 30, 2011 Report Posted December 30, 2011 I bought one off Amazon, I think it's an olympus brand... works pretty good. Better than the wireless that I bought from Jim. :/ Sorry Jim buddy. Any other info on this product, Jesse? (Not bailing on your mic setup yet, Jim - just checking it out. LOL) Quote
TK6294 Posted January 1, 2012 Report Posted January 1, 2012 No problem guys. I am always open to new ideas and new products. Actually, I am working with Aker put out a amp that has built in wireless mic. I hope to have it out I'm the next 6 months. Quote
senna1rossi[TK] Posted January 1, 2012 Report Posted January 1, 2012 Actually, I am working with Aker put out a amp that has built in wireless mic. I hope to have it out I'm the next 6 months. whoa, put me down for one, Jim! Quote
captsafe66[Admin] Posted January 4, 2012 Report Posted January 4, 2012 Staple guns work good for keeping the mics in place too.... Quote
ZacMuleer[TK] Posted January 10, 2012 Report Posted January 10, 2012 No problem guys. I am always open to new ideas and new products. Actually, I am working with Aker put out a amp that has built in wireless mic. I hope to have it out I'm the next 6 months. You tease! :-) I'd be down if it pans out. Keep us updated! Quote
TK-42779[501st] Posted September 7, 2012 Report Posted September 7, 2012 I reached this thread via the iComm website. I assume that this is a dead thread and nothing has come of your plans, Jim or are you close? Quote
TK6294 Posted September 7, 2012 Report Posted September 7, 2012 I reached this thread via the iComm website. I assume that this is a dead thread and nothing has come of your plans, Jim or are you close? Actually, it could be available in the next few months. The current version is too big for armor but i am hoping i can talk them into sliming it down some... Quote
vader74 Posted September 7, 2012 Report Posted September 7, 2012 (edited) bluetooth anything? an iphone app would be cool Edited September 7, 2012 by vader74 Quote
TK6294 Posted September 7, 2012 Report Posted September 7, 2012 bluetooth anything? an iphone app would be cool No plans for Bluetooth. iPhone apps are very expensive unless you do the programming yourself. That is beyond me... Quote
TK-42779[501st] Posted October 28, 2012 Report Posted October 28, 2012 Actually, it could be available in the next few months. The current version is too big for armor but i am hoping i can talk them into sliming it down some... So my RT will be here around the beginning of December, how is this coming along for you? Quote
TrooperJesse[TK] Posted October 29, 2012 Report Posted October 29, 2012 No problem guys. I am always open to new ideas and new products. Actually, I am working with Aker put out a amp that has built in wireless mic. I hope to have it out I'm the next 6 months. Jim I would love to get my hands on that keep me posted! Quote
Truimphmark[TK] Posted June 22, 2013 Report Posted June 22, 2013 Hi guys just thinking I use a scala cardo ( there are cheaper ones around )rider com on my motorbike links up to four riders,phone,mp3 and the radio if it could be linked to a speaker you've done it batt last round 8 hours even more that's 8 hours with the music going all day voice active as well and could be fitted in the inside at the back of the bucket Quote
Kaden Posted August 19, 2013 Report Posted August 19, 2013 Anybody tinkered with shortening the boom/stalk on the aker mic? It goes all the way around my face and gets hung-up in my bucket when I don and doff. Quote
SubSkip[TK] Posted August 19, 2013 Report Posted August 19, 2013 Off topic on a dead thread, but I just stick the mic in my mouth when putting on and taking off the bucket. Quote
Kaden Posted August 19, 2013 Report Posted August 19, 2013 Yeah, sorry about that.... thought I was in a different thread. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.