TX-8687[501st] Posted March 25, 2011 Report Share Posted March 25, 2011 Another noob question everyone, i've checked Joanne's, Home Depot, Ace, Lowe's, where can i find split rivet for the ab and kidney parts? Should i order online from some site? Do people have regular pop rivets on there armor? Are split rivets the only rivets on the whole armor found on the ab and kidney parts, while the rest of the armor can compose of pop rivets? Any advice is very helpful! Quote Link to comment Share on other sites More sharing options...
Sonnenschein Posted March 25, 2011 Report Share Posted March 25, 2011 Look for "brads" (paper clips), much more accurate. There were no pop rivets on the armor. Not even on the sniper plate. It was glued. This, when you want screen accuracy. If that doesn't matter to you, you can use pop rivets and fill the holes with bondo. Quote Link to comment Share on other sites More sharing options...
FIVE[501st] Posted March 25, 2011 Report Share Posted March 25, 2011 (edited) On 3/25/2011 at 11:15 PM, Sonnenschein said: Look for "brads" (paper clips), much more accurate. That's right. Go to Office Depot or Staples and grab a box of these. The heads should be 3/8"... but the measurement on the box is for the length of the brad part. So just be aware of that. Most brads are 3/8" top, but if you have a question about it remember you're in an office supply store and there is probably a ruler right next to you. Here they are (pre-painted) on my armor. Edited December 4, 2020 by gmrhodes13 link not working, removed gmrhodes13 2020 Quote Link to comment Share on other sites More sharing options...
Sonnenschein Posted March 25, 2011 Report Share Posted March 25, 2011 Nice TM suit, Noel! But I think the "legs" should be shortended, otherwise, I thnink", they'd pinch you Quote Link to comment Share on other sites More sharing options...
FIVE[501st] Posted March 25, 2011 Report Share Posted March 25, 2011 Nice TM suit, Noel! But I think the "legs" should be shortended, otherwise, I thnink", they'd pinch you Thanks! Where do you see a picture of my legs? I don't have them done yet... Well, I have one done, and it doesn't pinch. Quote Link to comment Share on other sites More sharing options...
FIVE[501st] Posted March 25, 2011 Report Share Posted March 25, 2011 OH! Legs of the brads!!! No... they had the snaps glued on top of them for the standard strapping... so they're not "there." Quote Link to comment Share on other sites More sharing options...
PGHtrooper21 Posted March 25, 2011 Report Share Posted March 25, 2011 Thanks for answering this question! I too was trying to find out where to find "Split Rivits"! I went to Lowes, Home Depot, Harbor Freight Tools, Walmart, Jo Ann Faberics, Michaels. The only place I could find them was on the internet. I wanted to find them localy instead of buying them online. The reason is for easily returns in case I have to return them. Andy Quote Link to comment Share on other sites More sharing options...
tkrestonva[TK] Posted March 25, 2011 Report Share Posted March 25, 2011 And if you do use split rivets, I believe you'll also need a special tool to install them. Well, special enough that you won't be able to find it at your local hardware store. Quote Link to comment Share on other sites More sharing options...
FIVE[501st] Posted March 25, 2011 Report Share Posted March 25, 2011 The only place I found actual split rivets was 5 minutes from my house at the local mountain True Value. haha This is the small, locally owned store ran by all my mountain-folk friends. They ROCK... and have EVERYTHING!!! That was after searching the entire metro of Albuquerque proper. Then I found out I didn't need them anyway. Quote Link to comment Share on other sites More sharing options...
TX-8687[501st] Posted March 26, 2011 Author Report Share Posted March 26, 2011 thanks for the advice everyone, so can i should ask, are pop rivets on ab and kidney EIB approved? Do most prefer snap rivets on the ab/kidney plate for durability? I'm assuming brads are EIB approved so i guess i should add snaps inside while the brads are merely for looks, if that makes sense. Quote Link to comment Share on other sites More sharing options...
FIVE[501st] Posted March 26, 2011 Report Share Posted March 26, 2011 ... so i guess i should add snaps inside while the brads are merely for looks, if that makes sense. Makes perfect sense. Yes... you can do that; the look not the reality. Form over function. Quote Link to comment Share on other sites More sharing options...
Nassik Posted April 4, 2011 Report Share Posted April 4, 2011 (edited) Anyone find these online anywhere? Living in Australia, I'm having a devil of a time finding something in the correct size. I haven't found anything that lists brads with the correct cap diameter... 3/8" or 9.375 mm. It's aggravating since I only need some for my thigh ammo belt. If anyone knows of an online source I'd appreciate hearing about it. The above link doesn't work as they won't ship internationally. I looked on eBay and found the correct size but those particular sellers won't ship outside of the U.S. Edited April 4, 2011 by Nassik Quote Link to comment Share on other sites More sharing options...
FIVE[501st] Posted April 4, 2011 Report Share Posted April 4, 2011 (edited) Can you get ---- Edited December 4, 2020 by gmrhodes13 link not working, removed gmrhodes13 2020 Quote Link to comment Share on other sites More sharing options...
Sonnenschein Posted April 4, 2011 Report Share Posted April 4, 2011 (edited) On 4/5/2011 at 12:17 AM, Bluey said: Can you get --- The head diameter with about 12mm seems a little too big Edited December 4, 2020 by gmrhodes13 link not working, removed gmrhodes13 2020 Quote Link to comment Share on other sites More sharing options...
FIVE[501st] Posted April 4, 2011 Report Share Posted April 4, 2011 The head diameter with about 12mm seems a little too big That's what I get for just pasting in a link. Quote Link to comment Share on other sites More sharing options...
Sonnenschein Posted April 4, 2011 Report Share Posted April 4, 2011 I was just sayin' .... The correct size should be quite available here.. I'd better start looking for all the troopers "beyond the pond" Quote Link to comment Share on other sites More sharing options...
Nassik Posted April 4, 2011 Report Share Posted April 4, 2011 Amazon isn't any help. I went through all of their offerings and found a handful of brads with the 3/8" cap diameter. And again, they won't ship outside of the U.S. Quote Link to comment Share on other sites More sharing options...
davej[TK] Posted April 5, 2011 Report Share Posted April 5, 2011 Anyone find these online anywhere? Living in Australia, I'm having a devil of a time finding something in the correct size. I haven't found anything that lists brads with the correct cap diameter... 3/8" or 9.375 mm. It's aggravating since I only need some for my thigh ammo belt. If anyone knows of an online source I'd appreciate hearing about it. The above link doesn't work as they won't ship internationally. I looked on eBay and found the correct size but those particular sellers won't ship outside of the U.S. Shawn, I popped in to my local newsagent, and found a pack of 30 for $2.50. I haven't measured them as yet, but, to my untrained eye, they look to be the right size. Quote Link to comment Share on other sites More sharing options...
Nassik Posted April 6, 2011 Report Share Posted April 6, 2011 I'll have to head out to office supply shops in the area, then. I prefer the convenience of delivery but sometimes I've got to get out of the house, I suppose. Quote Link to comment Share on other sites More sharing options...
PGHtrooper21 Posted April 6, 2011 Report Share Posted April 6, 2011 I just ordered these from Staples. http://www.staples.com/OIC-1-Brass-Fastener-3-8-Head/product_378814?cmArea=page_rr Andy Quote Link to comment Share on other sites More sharing options...
Nassik Posted April 6, 2011 Report Share Posted April 6, 2011 Staples does carry them but at this point in the discussion we're referring to non-U.S. based troopers. Staples doesn't ship internationally. Quote Link to comment Share on other sites More sharing options...
davej[TK] Posted April 6, 2011 Report Share Posted April 6, 2011 I'll have to head out to office supply shops in the area, then. I prefer the convenience of delivery but sometimes I've got to get out of the house, I suppose. Maybe you could buy a newspaper, or a coke or something, and make it worthwhile? Quote Link to comment Share on other sites More sharing options...
seantrooper[TK] Posted April 6, 2011 Report Share Posted April 6, 2011 try officeworks mate. they are very likely to have them Quote Link to comment Share on other sites More sharing options...
tkrestonva[TK] Posted April 6, 2011 Report Share Posted April 6, 2011 If Officeworks doesn't pan out, let me know. I've got a bunch of extras from a Staples buy. Send me a PM with your address and how many you need - assuming it's only a handful - I'll send you some of mine. Quote Link to comment Share on other sites More sharing options...
davej[TK] Posted April 8, 2011 Report Share Posted April 8, 2011 try officeworks mate. they are very likely to have them I tried Officeworks first, and they didn't have the right ones. Shawn, I have a heap, and am happy to send you a set. May be a bit cheaper than having Brian send you a set. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.