new Doopydoos blaster kit?

[pandatrooper[TK]]

Hadn't noticed this E-11 blaster kit before.

 

http://www.doopydoos.com/stormtrooper-e-11-complete-anh-e-11-blaster-kit-offer-2685-p.asp

[JKCHEN]

Thank you, Terry! I ordered.

[Amish Trooper]

Wow what a cheap price for a nice casting. I say nice because i haven't seen or read about any bad casting from Doopydoos

[TK bondservnt[501st]]

what a great addition to the detail for a sterling replica!

 

takes a lot of the work out of my builds that's for sure!!

 

just under 100.00 usd with shipping to USA!

Edited March 19, 2011 by TK Bondservnt 2392

[BananoPower22[TK]]

I've tried contacting them to see if they sold separate pieces since I'm looking for some cylinders but they haven't replied yet

[PGHtrooper21]

This is a welcome addition!

 

Andy

[Locitus[Admin]]

Cool!

[ean]

Just ordered that blaster kit, hopefully with some mods I will be able to insert some electronics.

 

iain

[Monoman527911]

Yep, I ordered a kit a few days ago..Will post build log

[TK bondservnt[501st]]

the only thing about this new kit is that it does not have the end holes where the T Track goes into the barrel.

 

so a tube build can look a little more screen accurate...

 

you can really see through a pipe build in many ways that you can't on this most excellent new build!

[Darth Hilarious]

The only thing it doesn't include is the scope rail...

Any ideas where to get one of those, anybody?

[Femtrooper Julie[501st]]

Oh, pretty! I like it!

[TK bondservnt[501st]]

I make sight rails.

[JKCHEN]

It's arrived today. looks great!

--------

Edited July 31, 2022 by gmrhodes13
link removed no longer working

[am1sh2el3[501st]]

Man! That's sweet!

[BananoPower22[TK]]

It sure does look good! Good luck with the build JK ---------

Edited July 31, 2022 by gmrhodes13
link removed no longer working

[TK bondservnt[501st]]

looks like mounting the scope rail won't be exactly correct as he has filled the last hole on top with T Track.

 

usually the scope rail goes into the hole. lot's of ways were used, but the best looking ones use the method mentioned above.

[irocink33[TK]]

I plan on getting this kit and using a regular PVC pipe for my build. Most of the threads I have read on this kit is it goes great with the PVC and a bit nicer. Plus that leaves more for modifications that you can do outside of the resin. I can't wait to start this.

[Darth Voorhees[501st]]

I plan on getting this kit and using a regular PVC pipe for my build. Most of the threads I have read on this kit is it goes great with the PVC and a bit nicer. Plus that leaves more for modifications that you can do outside of the resin. I can't wait to start this.

 

The PVC pipe build is another kit from them. technically the PVC pipe is slightly wider in diameter than a real sterling,and the parts for that kit are modded to fit the pipe. The pieces to this kit would need to be modded to fit on a pipe..so youd be better off buying the kit of rthe pipe and save yourself some time/trouble

[zsavk[TK]]

Is this kit centurion approved?

[sith_241]

Is this kit centurion approved?

 

You could probably make it to Centurion standards...i dont see why it wouldnt be.

[Turrican]

Also i would see there no problem for a AnH Centurion.

The blasterparts are a great clean cast of a real sterling and the scope is also a good cast of a m38.

Closer will only be the real deal.

Edited April 29, 2011 by Turrican

[Angevine[TK]]

I have been putting this blaster together for a couple of weeks now and it does look good.

 

Mine had loads of air holes in the top so quite a bit of filling and sanding was required.

 

Just trying to source a scope rail. And sources or advice for this kit would be appreciated due to the end holes being filled in.

[JKCHEN]

My e-11 almost done ! just onething need ask:

In EIB requirement: "D-ring mounted on the rear",does not mention have to be Metal D-ring. Is it means that the D-ring in this kit is acceptable for EIB?? Do I really need change it to a metal one?

 

thanks~

[Brett]

My e-11 almost done ! just onething need ask:

In EIB requirement: "D-ring mounted on the rear",does not mention have to be Metal D-ring. Is it means that the D-ring in this kit is acceptable for EIB?? Do I really need change it to a metal one?

 

thanks~

 

As long as there was a D ring I don't see a problem. You can't tell much a difference after painting. And like you said, in the req. it just says "D-ring mounted on the rear." I just ordered my kit. And I'll be going for my EIB as well.

Edited May 3, 2011 by Brett