Otown Posted August 12, 2013 Report Posted August 12, 2013 (edited) Looking for a completed set of Shadow Trooper Armor of high quality and wanted to get your guys and gals opinion. I'm 6'1 220 so also looking for a larger set. I have 0 experience as well. Any advice would be greatly appreciated. Thanks in advance. MTFBWY Mike Edit: anyone have experience with this site? www.originalstormtrooper.com Edited August 12, 2013 by Otown Quote
Kath[501st] Posted August 22, 2013 Report Posted August 22, 2013 Newbie question time!!! Ok i feel really noobish right now. New to the site and wanted to join the 501'st and get armor. So of course i have to get armor first and was reading and loved this thread. But there are so many abbreviations that i didn't not understand. What does TE2 T/MC and CFO mean. So many acronyms made me little confused. On the subject of trimming what does that mean? Is the armor sticking to other parts. What trimming goes on? Second I am currently planning on asking someone to make a kit for me for i have NO experience making armor. Ive made a few basic cloth things in my life and have never tried armor. I am a larger guy 6 foot and wider shoulders 250lb's Anyone have advice on how i should go? (college student so low cash XD) Im thinking along the lines of Supertrooper or Tary. 1000% noob and looking for yall's friendly advice. Quote
maxsteele[TK] Posted August 25, 2013 Report Posted August 25, 2013 Looking for a completed set of Shadow Trooper Armor of high quality and wanted to get your guys and gals opinion. I'm 6'1 220 so also looking for a larger set. I have 0 experience as well. Any advice would be greatly appreciated. Thanks in advance. MTFBWY Mike Edit: anyone have experience with this site? www.originalstormtrooper.com Type in "originalstormtrooper" into the search for "all topics", and read some of the forum posts created already. Then you can make an informed decision on them. Quote
Greensparrow Posted August 27, 2013 Report Posted August 27, 2013 (edited) Hi all, so like many here this is the location of my first post. First off I want to say thanks for an awesome thread, i came here looking as i wanted to buy a fully made costume but was hesitant on shelling out 1000 for something that i could not be sure would fit me, now i know there is so much more to a trooper costume. So im looking at two options, 1) being the AP set, the second being the RT-mod, im 6'2 220 lbs, and ive got a big melon, so im really leaning towards the RT-mod. BUT the anxious little kid in me would really like the costume before halloween and trooper7 has not replied to my email yet, and the AP guys were blazingly fast replying to me...... i know its only been a few days since i emailed him but does anyone know if he is still making kits? last but not least being located in Calgary AB, Canada id like to stick to someone local to avoid paying a couple of hundred at the border. Edit Oh yeah also on the topic of boots, what qualifies a boot as an elvis or mariachi boot? Edited August 27, 2013 by Greensparrow Quote
Locitus[Admin] Posted August 27, 2013 Report Posted August 27, 2013 Don't bother with AP if you're tall and heavy. AP is the opposite of that. Also don't look for elvis boots, look for chelsea. There is a bunch of topics already on the matter, and we have pictures of the original boots used in the movies in our gallery called "photo references". Quote
Greensparrow Posted August 28, 2013 Report Posted August 28, 2013 Thanks for the reply, I am going to go with the RT-Mod, im already on the waiting list Now i figure ive got a good 6 months to build a blaster and then i should be ready for the arrival of my kit. Quote
ImperialTrooper21 Posted August 28, 2013 Report Posted August 28, 2013 My english is not the best so is here some one from the 501st GermanGarision who knows something about kits or better who sells kits? When yes please answer per personal message Thanks Ferdi Quote
jwelch13 Posted August 31, 2013 Report Posted August 31, 2013 How up to date is the vetted list ? Quote
Locitus[Admin] Posted August 31, 2013 Report Posted August 31, 2013 How up to date is the vetted list ?Fairly up to date. Legit makers don't pop up too often. Sent from my GT-I9300 using Tapatalk 4 Quote
jwelch13 Posted September 1, 2013 Report Posted September 1, 2013 Is trooperbay a good site for accessories for armor or should I stay away from it Quote
Daetrin[Admin] Posted September 1, 2013 Author Report Posted September 1, 2013 I have always found him to be reputable in this regard. I've used his decals and sport one of his neck wallets too. Quote
Hermanator Posted September 5, 2013 Report Posted September 5, 2013 What is the best way to get in touch with TM for pricing and availability? I havent seen any past armor run posts in the For Sale areas, and I sent him a PM. Still awaiting a response, Im sure hes busy. Anyone mind PMing me details on how to get in touch, or at least the price of a full kit? Thanks! Quote
Dark PWF[Staff] Posted September 5, 2013 Report Posted September 5, 2013 Kevin, He is a member here at FISD, so you can send him a Private Message to contact him. Quote
Hermanator Posted September 5, 2013 Report Posted September 5, 2013 Thank you! He replied pretty quick. Quote
jwelch13 Posted September 6, 2013 Report Posted September 6, 2013 I sent an email to RT to get my name added to the waiting list and other information just waiting for a response. Quote
Haribon72[TK] Posted October 3, 2013 Report Posted October 3, 2013 (edited) Does anyone have anything thoughts on the upcoming EFX - ANH HERO STORMTROOPER LEGEND HELMET? ---------- Edited July 29, 2021 by gmrhodes13 link not working removed Quote
lorddavids[TK] Posted October 4, 2013 Report Posted October 4, 2013 Hi, What about NE armor? Is accurate? Is 501st approved? Why isn't it in the initial list? Thank youu Quote
animefreak7 Posted October 10, 2013 Report Posted October 10, 2013 Hi, What about NE armor? Is accurate? Is 501st approved? Why isn't it in the initial list? Thank youu I have NE armor, it's by the makers of the old AM armor. Mine's not approved yet, as I still need a holster, but I know other people in the Mountain Garrison who have their's finished and they were approved no problem, so it should be approvable. My guess is it isn't on the initial list because it's new and just hasn't been added yet. I got mine in June or July on the second run of it. Quote
Locitus[Admin] Posted October 10, 2013 Report Posted October 10, 2013 I have NE armor, it's by the makers of the old AM armor. Mine's not approved yet, as I still need a holster, but I know other people in the Mountain Garrison who have their's finished and they were approved no problem, so it should be approvable. My guess is it isn't on the initial list because it's new and just hasn't been added yet. I got mine in June or July on the second run of it. No, that is not why NE isn't on the list. NE is not on our list, and will not be on our list of recommended vendors because it is an unapproved recast (from the perspective of the makers of the original armour). IE, that is the bad kind of recast. It is however (like many other recasts, good or bad) 501st approved as long as it is assembled properly and fits its wearer. But we at FISD cannot recommend it because of its origins. Quote
RamboBrite Posted October 13, 2013 Report Posted October 13, 2013 I wanted to add my thanks for this awesome thread. 21 pages later, combined with tips from folks at a wonderful 501st dinner last night, and I'm on my way! I got on the ATA waiting list yesterday - he said 8-9 months, as an fyi. This gives me plenty of time to get the other bits in order, do some handling/wrangling, and save my pennies. Aiming towards being ready for Dragon*Con 2014. On to the build threads! Quote
mikymektrooper Posted October 13, 2013 Report Posted October 13, 2013 Ciao mi chiamo Michele e sto entrando pian piano in questo mondo. Ho letto molte pagine di questo sito e dal forum 501 italica. Sono un principiante in questo campo ma sono riuscito, correggimi se sbaglio. A capire che le armor più buone sono la TM e la RS, ma purtroppo vengono molto. Ho letto che come armatura base per la 501 va bene anche una FX e magari prendere un elmo da AP. Voi che ne pensate? Purtroppo vorrei un'armatura pronta da indossare in quanto sono poco pratico e vorrei evitare di tagliare e soprattutto di usare vernici, Sapete se qualcuno sta vendendo una armatura già assemblata FX e un elmo AP? Sapete se i fornitori ufficiali vendono armature pronte da indossare o se comunque va sempre fatto qualche piccolo lavoretto? Perdonatemi se scrivo a coi ma il sito e' inglese e ho visto che comunque è presente qualcuno italiano. Spero di non aver disturbato nessuno e appena potete sarei grato se qualcuno mi rispondesse. Ringrazio in anticipo per la cortesia. Contattami anche in pvt: sir_michele88@libero.it Michele Quote
Dypevag Posted November 12, 2013 Report Posted November 12, 2013 (edited) This is my very first step into owning a Stormtrooper costume/suit/armour/uniform. This website is very informative thanks! But here's my specifics: Average height, pot belly, shortish legs!!! Live in the UK. Budget for uniform including helmet no more than GBP £800 (is that reasonable?) I wand as cheap a suit as I can whilst passing muster for joining fellow stormtroopers in whatever regiment I go for. Any advice would be great as to what passes muster etc. I have no previous experience with these plastics so 'joining' 'butting' and 'trimming' would have to be fairly basic. Is it possible to build up a suit bit by bit maybe sourcing various parts from several manufacturers? Are there trade secrets like a cheap make of gloves or boots etc? What about getting it all ready made like at this site: https://www.originalstormtrooper.com/ I'm going to concentrate on extras such as a blaster later but for now I'm itching to get my hands on an entry level costume! Edited July 29, 2021 by gmrhodes13 updated text Quote
Cantina Security[501st] Posted November 18, 2013 Report Posted November 18, 2013 (edited) Don't do it On 11/13/2013 at 5:42 AM, Dypevag said: This is my very first step into owning a Stormtrooper costume/suit/armour/uniform. This website is very informative thanks! But here's my specifics: Average height, pot belly, shortish legs!!! Live in the UK. Budget for uniform including helmet no more than GBP £800 (is that reasonable?) I wand as cheap a suit as I can whilst passing muster for joining fellow stormtroopers in whatever regiment I go for. Any advice would be great as to what passes muster etc. I have no previous experience with these plastics so 'joining' 'butting' and 'trimming' would have to be fairly basic. Is it possible to build up a suit bit by bit maybe sourcing various parts from several manufacturers? Are there trade secrets like a cheap make of gloves or boots etc? What about getting it all ready made like at this site:https://www.originalstormtrooper.com/ I'm going to concentrate on extras such as a blaster later but for now I'm itching to get my hands on an entry level costume! Edited July 29, 2021 by gmrhodes13 updated text Quote
tommyomega Posted December 13, 2013 Report Posted December 13, 2013 No, that is not why NE isn't on the list. NE is not on our list, and will not be on our list of recommended vendors because it is an unapproved recast (from the perspective of the makers of the original armour). IE, that is the bad kind of recast. It is however (like many other recasts, good or bad) 501st approved as long as it is assembled properly and fits its wearer. But we at FISD cannot recommend it because of its origins. Well... crud. That puts me in an ethical bind, I got a kit hoping to avoid recasting. Ugh. Quote
jcronick Posted December 17, 2013 Report Posted December 17, 2013 I have exchanged a few emails with mtk_armor@cox.net He is calling it MTK stormtrooper armor. ...affiliated with trooperbay somehow but what I am wondering is if anyone has purchased his kit. Pros? Cons? From what I can tell it looks pretty legit. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.